Materiales
Materiales
A gradient four-layered gelatin methacrylate/agarose construct as an injectable scaffold for mimicking osteochondral tissue
27/03/2023 -
Abstract Due to complexity of the osteochondral (OC) lesion sites, injectable hydrogels, as minimally invasive approach, are promising OC tissue engineering scaffolds. Here, a...
The Effect of Protein Derivatives and Starch Addition on Some Quality Characteristics of Beef Emulsions and Gels
27/03/2023 -
Starch and plant or animal proteins represent a rich source that can be used for fortifying meat products. The present study aimed to analyze how the different additives used (soy protein isolate,...
Effect of Heating under Different Vacuum Levels on Physicochemical and Oxidative Properties of Beef Sirloin
24/03/2023 -
The physicochemical and oxidative properties of beef sirloin slices heated under atmospheric (101.33 kPa, a vacuum percent of 0%, control) and vacuum (50.8 kPa, 50% and 7.2 Pa, 99.99%) conditions by...
The Distribution of Selected Toxic Elements in Sauced Chicken during Their Feeding, Processing, and Storage Stages
26/03/2023 -
Sauced chicken is popular food worldwide. However, the elemental pollution of poultry industrialization has led to an increasing health risk concern. In this study, four typical toxic elements,...
Sedimentary Facies, Architectural Elements, and Depositional Environments of the Maastrichtian Pab Formation in the Rakhi Gorge, Eastern Sulaiman Ranges, Pakistan
27/03/2023 -
An integrated study of sediments was conducted to examine the facies architecture and depositional environment of the Cretaceous Pab Formation, Rakhi Gorge, and Suleiman Ranges, Pakistan. This...
Effect of Vibration Procedure on Particle Distribution of Cement Paste
24/03/2023 -
Vibration procedures significantly affect the performances of cement-based materials. However, studies on the distribution of certain particles within cement-based materials are limited due to the...
Understanding the Residence Time Distribution in a Transient Inline Spiking System: Modeling, Experiments, and Simulations
-
A transient inline spiking system is a promising tool for evaluating the performance of a virus filter in continuous operation. For better implementation of the system, we performed a systematic...
Efficient, Breathable, and Compostable Multilayer Air Filter Material Prepared from Plant-Derived Biopolymers
-
State-of-art face masks and respirators are fabricated as single-use devices using microfibrous polypropylene fabrics, which are challenging to be collected and recycled at a community scale....
Development of Carbon-Nanodot-Loaded PLA Nanofibers and Study of Their Barrier Performance for Medical Applications
27/03/2023 -
The COVID-19 pandemic has increased the usage of personal protective equipment (PPE) all round the world and, in turn, it has also increased the waste caused by disposable PPE. This has exerted a...
Microscale and Macroscale Deformation Behavior of Electrospun Polymeric Nanofiber Membranes Using In Situ SEM during Mechanical Testing
24/03/2023 -
Electrospun nanofiber membranes show high potential in various application fields (e.g., filtration, catalysis, and sensing). Nevertheless, knowledge of the mechanical behavior, and more...
A Solid-State Wire-Shaped Supercapacitor Based on Nylon/Ag/Polypyrrole and Nylon/Ag/MnO2 Electrodes
24/03/2023 -
In this work, a novel wire-shaped supercapacitor based on nylon yarn with a high specific capacitance and energy density was developed by designing an asymmetric configuration and integrating...
Design, Manufacturing and Acoustic Assessment of Polymer Mouthpieces for Trombones
27/03/2023 -
Brass instruments mouthpieces have been historically built using metal materials, usually brass. With the auge of additive manufacturing technologies new possibilities have arisen, both for testing...
Mechanical and Thermal Properties of Thermally Conductive Enhanced Paraffin/Gypsum Composites
25/03/2023 -
The low thermal conductivity of gypsum-based composites containing phase change materials (PCMs) has limited their application in construction materials. In this study, the mechanical and thermal...
Effects of fabrication parameters on the mechanical properties of short basalt?fiber?reinforced thermoplastic composites for fused deposition modeling?based 3D printing
24/03/2023 -
Composite filaments of recyclable and sustainable short basalt fiber (BF)?reinforced flexible polymer for FDM were developed by extrusion process. The effects of the key fabrication parameters on the...
New 2.5?D twin screw extruder model for the feed section of a co?rotating twin screw extruder with comparisons to data
27/03/2023 -
Twin screw extruder unit operation.Many polymers are processed and compounded in co?rotating, fully intermeshing twin screw (TS) extruders. The typical compounding process consists of multiple unit...
Experimental and CFD?Based Simulation of Oil?in?Water Emulsion Flow?through Pipeline
21/03/2023 -
Transportation of heavy crude oil (HCO) through pipelines is difficult due to its high viscosity. Transportation of viscous crude oil as concentrated oil?in?water (O/W) emulsion is believed to be one...
Erratum: Chemically bonded PA?PTFE?oil compounds by reactive processing: Chemical, thermal, morphological, and mechanical analysis
22/03/2023 -
HDPE, PLA, and PCL coated cotton base fabrics bonded to woven shirting fabrics at different application conditions by a flat?bed fusing press. The importance of bonding temperature, time, and polymer...
Effect of infusion strategy on vacuum bagging process and properties of polyamide 6 composites
18/03/2023 -
Abstract In this work, glass fiber reinforced polyamide 6 (GF/PA6) composites were fabricated by vacuum bagging (VB) process. An experimental platform for VB process of...
Wetting and friction behavior of chemically bonded PA?PTFE?oil compounds
22/03/2023 -
Polyamide (PA), polytetrafluoroethylene (PTFE), and olefinic oils are incompatible. High?energy radiation in the presence of oxygen can break the PTFE chain, generating hydrophilic functional groups...
Energy Balance of the Dynamic Impact Stressing of Conveyor Belts
23/03/2023 -
This paper presents research into the energy balance of stressing conveyor belts by impact processes. Research is described in the areas of measuring the resistance of conveyor belts to puncture, the...
Effect of Cementitious Material Composition on the Performance of Low-Carbon Foamed Lightweight Soil
14/03/2023 -
This study simulated the production process of low-carbon foamed lightweight soil (LCFLS) prepared using prefabricated foam technology in real engineering conditions. The preparation and properties...
