Materiales

Materiales

Switching the photo physics of MDMO-PPV under PMMA environment- a boon for organic electronics
10/03/2023 - Abstract The paper presents a fascinating photo physics of the light emitting polymer (LEP), poly2-methoxy-5-(3’,7’-dimethyloctyloxy)-1,4-phenylenevinylene] (MDMO-PPV) when...
Dual-Tracer PET Image Separation by Deep Learning: A Simulation Study
23/03/2023 - Multiplexed positron emission tomography (PET) imaging provides perfectly registered simultaneous functional and molecular imaging of more than one biomarker. However, the separation of the...
On the Limits of the EIS Low-Frequency Impedance Modulus as a Tool to Describe the Protection Properties of Organic Coatings Exposed to Accelerated Aging Tests
11/03/2023 - This study analyzes the limitations of the low-frequency EIS impedance modulus as a tool to describe the protective properties of organic coatings subjected to accelerated aging tests. Acrylic...
Preparation and Performance of a Self-Produced High-Molecular-Weight Waterborne Epoxy–Acrylic Emulsion
10/03/2023 - To improve the stability of waterborne epoxy–acrylic emulsions and their comprehensive properties, such as the chemical resistance of coatings, a new research idea is proposed in this...
Tailored Biobased Resins from Acrylated Vegetable Oils for Application in Wood Coatings
20/03/2023 - The modern coating market is dominated by acrylic, polyurethane, and polyester polymer resins produced from unsustainable fossil resources. Herein, we propose the preparation of resins from biobased...
Tough Bioplastics from Babassu Oil-Based Acrylic Monomer, Hemicellulose Xylan, and Carnauba Wax
23/03/2023 - We describe here the fabrication, characterization, and properties of tough bioplastics made of a babassu oil-based acrylic polymer (PBBM), hemicellulose xylan grafted with PBBM chains, and carnauba...
Penetration Coefficients of Commercial Nanolimes and a Liquid Mineral Precursor for Pore-Imitating Test Systems—Predictability of Infiltration Behavior
21/03/2023 - Nanolimes have been commercially available for over a decade as a remineralization agent for natural stone to combat deterioration. While they have been applied successfully and studied extensively,...
Using Tannic-Acid-Based Complex to Modify Polyacrylonitrile Hollow Fiber Membrane for Efficient Oil-In-Water Separation
- Separating oil from water allows us to reuse both fluids for various applications, leading to a more economical process. Membrane separation has been evidenced as a cost-effective process for...
Effects of Porous Supports in Thin-Film Composite Membranes on CO2 Separation Performances
- Despite numerous publications on membrane materials and the fabrication of thin-film composite (TFC) membranes for CO2 separation in recent decades, the effects of porous supports on TFC membrane...
CuInS2 Nanocrystals Embedded PMMA Composite Films: Adjustment of Polymer Molecule Weights and Application in Remote-Type White LEDs
17/03/2023 - The commercial application of colloidal semiconductor nanocrystals has been realized owing to the development of composite film technology. Here, we demonstrated the fabrication of green and red...
Low Dielectric Constant Photocurable Fluorinated Poly (Phthalazinone Ether) Ink with Excellent Mechanical Properties and Heat Resistance
20/03/2023 - The photosensitive resins for 3D printing technology have been widely applied throughout the advanced communication field due to their merits of high molding accuracy and fast processing speed....
Nanotopography of Polystyrene/Poly(methyl methacrylate) for the Promotion of Patient Specific Von Willebrand Factor Entrapment and Platelet Adhesion in a Whole Blood Microfluidic Assay
22/03/2023 - Platelet function testing is essential for the diagnosis of patients with bleeding disorders. Specifically, there is a need for a whole blood assay that is capable of analysing platelet behaviour in...
Silver Nanoparticles as Antifungal Agents in Acrylic Latexes: Influence of the Initiator Type on Nanoparticle Incorporation and Aureobasidium pullulans Resistance
22/03/2023 - Discoloration of wood coatings due to fungal growth negatively affects the aesthetic properties of the coatings, and new ways to control fungal growth on coatings are needed. For this reason, silver...
Current State of the Art and Next Generation of Materials for a Customized IntraOcular Lens according to a Patient-Specific Eye Power
22/03/2023 - Intraocular lenses (IOLs) are commonly implanted after surgical removal of a cataractous lens. A variety of IOL materials are currently available, including collamer, hydrophobic acrylic, hydrophilic...
Full-Period Quantum Phase Estimation
- Quantum sensing can provide the superior sensitivity for sensing a physical quantity beyond the shot-noise limit. In practice, however, this technique has been limited to the issues of phase...
Experimental Simulation of Larger Quantum Circuits with Fewer Superconducting Qubits
- Although near-term quantum computing devices are still limited by the quantity and quality of qubits in the so-called NISQ era, quantum computational advantage has been experimentally demonstrated....
Comparing different data processing methods for determining a Prony series from Dynamic Mechanical Analyzer frequency data
11/03/2023 - Four processing paths are possible to determine a linear viscoelastic Prony series from DMA data. Path 3 was found to have the lowest, cumulative error and is recommended for use.This study focuses...
Surface modification of silica with polymethylmethacrylate?co?methacrylic acid for enhancement of self?healing performance of natural rubber composites based on metal thiolate ionic network
15/03/2023 - Preparation of self?healing NR/modified silica composites.Polymethylmethacrylate?co?methacrylic acid (PMMA?co?MAA) was utilized for surface improvement of silica to be used as reinforcement in...
Thermoplastic Polymers/Silicon Nanocomposites: Influence of Concentration on Morphological, Optical, and Electrical Properties
22/03/2023 - The following thermoplastic polymers were used in this study at several concentration (0.50, 0.75, and 1.00%) and were deposited on porous silicon particles (PSi) to use the spin coating method:...
Infusible Thermoplastic Composites for Wind Turbine Blade Manufacturing: Fatigue Life of Thermoplastic Laminates under Ambient and Low?Temperature Conditions
18/03/2023 - Fatigue properties of a recyclable acrylic?based thermoplastic composites are shown to have suitable fatigue life for use in manufacturing wind turbine blades compared to legacy epoxy and polyester...
A Bimetallic Metal–Organic?Framework?Based Biomimetic Nanoplatform Enhances Anti?Leukemia Immunity via Synchronizing DNA Demethylation and RNA Hypermethylation
12/03/2023 - A bimetallic metal–organic?framework?based biomimetic nanoplatform as a “nano?epidrug” (AFMMB) is synthesized for improving anti?leukemia immunity via dual targeting of DNA and RNA methylation....