Materiales
Materiales
Improved Foaming Performance of Thermoplastic Polyether Amide Elastomers via Chain Extension: Toward Self‐Powered Intelligent Footwear
12/03/2025 -
Polyamide 6‐based thermoplastic elastomers (TPAE) with superior tensile strength and elongation‐at‐break are successfully synthesized by one‐pot melt polycondensation. Two different types of...
Multimaterial Bonding of Additively Manufactured Carbon Fiber‐Reinforced Thermoplastics/64 Titanium
05/02/2025 -
A multimaterial technique for directly bonding carbon‐fiber‐reinforced thermoplastics to titanium alloy substrates is developed using a fused filament fabrication 3D printer, and a maximum shear...
Correction to “Fatigue Crack Characteristics in Gradient Predeformed Pearlitic Steel under Multiaxial Loading”
21/11/2024 -
The incorporation of maleic anhydride‐grafted styrene‐ethylene‐butene‐styrene copolymer (SEBS‐g‐MAH) leads to the formation of core‐shell structure particles within the...
Construction of Core?Shell Structure in PA6/ABS/SEBS Blends for Achieving Stiffness?Toughness Balance
20/11/2024 -
The incorporation of maleic anhydride?grafted styrene?ethylene?butene?styrene copolymer (SEBS?g?MAH) leads to the formation of core?shell structure particles within the...
Effective Oil/Water Separation Sorbent Based on Nylon 6,6-Organoclay Nanofiber Mats
21/11/2024 -
Oil spills and marine pollution caused by oil spills have a serious effect on environment and human life. The efficient removal of oils, petroleum-based products, and organic solvents from water...
Detection of Defects in Polyethylene and Polyamide Flat Panels Using Airborne Ultrasound-Traditional and Machine Learning Approach
18/11/2024 -
This paper presents the use of noncontact ultrasound for the nondestructive detection of defects in two plastic plates made of polyamide (PA6) and polyethylene (PE). The aim of the study was to: (1)...
Melt Spinnability Comparison of Mechanically and Chemically Recycled Polyamide 6 for Plastic Waste Reuse
12/11/2024 -
With the increasing volume of synthetic fiber waste, interest in plastic reuse technologies has grown. To address this issue, physical and chemical recycling techniques for polyamide, a major...
A facile and sustainable preparation of effective biomass macromolecular flame retardants for epoxy resins with improved flame retardation, smoke suppression, and mechanical performance
11/11/2024 -
Solid phase flame retardant mechanism of anti?dripping PA6 fiber.AbstractA developing society requires polycaprolactam (PA6) fibers with flame retardant. Currently, the additive flame retardants...
Printability and mechanical behaviors of continuous polyamide fiber reinforced polycaprolactone composites
07/11/2024 -
Development and testing of continuous polyamide fiber reinforced polycaprolactone composites.Polycaprolactone (PCL) is a biodegradable material that has received significant attention in the last...
Bonding strength of short carbon fiber reinforced PA6 composites ultrasonic welding joints
08/11/2024 -
The graphical abstract shows the research methods and results of ultrasonic welding test of carbon fiber reinforced PA6 composites. Firstly, the weldability of the material was explored, and CF/PA6...
From Textile and Mine Waste Into Sustainable, Low?Cost and Valuable Nanotextile Fabric?Based Composites Through Electrospinning Technique
08/11/2024 -
ABSTRACTThe rapid expansion of textile industries has contributed significantly to non?biodegradable waste generation, presenting a global environmental challenge. Additionally, waste from the mining...
Repurposing ABS to Produce Polyamide 6 (PA6)-Based Blends: Reactive Compatibilization with SAN-g-MA of a High Degree of Functionalization
05/11/2024 -
In this study, recycled acrylonitrile-butadiene-styrene terpolymer (ABSr) was reused to produce polyamide 6 (PA6)-based blends. This was achieved through reactive compatibilization using...
Enhancing resistance welding strength of carbon fiber/polycaprolactam thermoplastic composites through coupling agent?modified metal heating elements
05/11/2024 -
Mechanism of Resistance Welding Heating Elements Modified by Coupling Agents.This study investigates the impact of coupling agent?modified resistance welding heating elements on the welding strength...
Super Tough PA6/PP/ABS/SEBS Blends Compatibilized by a Combination of Multi-Phase Compatibilizers
02/11/2024 -
Development of multi-component blends to prepare high-performance polymer materials is still challenging, and is a key technology for mechanical recycling of waste plastics. However, a multi-phase...
A hydrogel sensor based on conic baston structure
26/10/2024 -
The flame retardancy mechanisms of polyphenylene sulfide/polyamide 6/short glass fiber (PPS/PA6/SGF) composites at the presence of aluminum diethylphosphinate (ADPP).AbstractFlame retardant polyamide...
Optimization of Production Parameters for Impact Strength of 3D-Printed Carbon/Glass Fiber-Reinforced Nylon Composite in Critical ZX Printing Orientation
26/10/2024 -
Additive manufacturing (AM) methods are increasingly being adopted as an alternative for mass production. In particular, Fused Deposition Modeling (FDM) technology is leading the way in this field....
Mechanical recycling of polyamide 6 and polypropylene for automotive applications
25/10/2024 -
Recycling process of thermoplastic waste for automotive manufacturing.This study investigates the mechanical recycling of polyamide 6 (PA6) from discarded fishing nets and polypropylene (PP) from...
From the highway to receiving water bodies: identification and simultaneous quantification of small microplastics (<?100 µm) in highway stormwater runoff
23/10/2024 -
Highway stormwater (HSW) runoff is among the environment’s most important sources of microplastics. This study aimed to characterize via vibrational spectroscopy and quantify SMPs (small...
Electrospun Nanofiber Dopped with TiO2 and Carbon Quantum Dots for the Photocatalytic Degradation of Antibiotics
22/10/2024 -
Novel photocatalysts were synthesized through the association of carbon quantum dots (CQDs) with commercial (P25) titanium dioxide (TiO2) by sonication. The resulting TiO2/CQDs composite was then...
Green Recycling of Carbon/Carbon Composites by Solid-State Shear Milling Technology as a Polyamide Multi-Functional Modifier
23/10/2024 -
Carbon/carbon (C/C) composite materials are widely used in aerospace, the military and nuclear energy. The outstanding mechanical qualities of C/C composites mean that they are difficult to crush and...
Preparation of Montmorillonite&ndash;Melamine Cyanurate and Inhibition of the Emission of Phosphine from PA6/Aluminum Hypophosphate
21/10/2024 -
In order to mitigate the release of toxic phosphine from aluminum hypophosphite in twin-screw processing, montmorillonite&ndash;melamine cyanurate was prepared by three methods: (1)...
