Materiales
Materiales
Aerospace, Vol. 10, Pages 314: Crashworthiness Study of a Newly Developed Civil Aircraft Fuselage Section with Auxiliary Fuel Tank Reinforced with Composite Foam
22/03/2023 -
Over the past two decades, aircraft crashworthiness has seen major developments, mainly with modern computing systems and commercial finite element (FE) codes. The structure and the material have...
Thermoplastic Polymers/Silicon Nanocomposites: Influence of Concentration on Morphological, Optical, and Electrical Properties
22/03/2023 -
The following thermoplastic polymers were used in this study at several concentration (0.50, 0.75, and 1.00%) and were deposited on porous silicon particles (PSi) to use the spin coating method:...
Novel Collection Equipment Loaded with Superhydrophobic Sponge for Continuous Oil/Water Separation from Offshore Environments
07/03/2023 -
Currently, frequent oil spill accidents caused by transportation, storage, and usage may lead to extensive damage to marine ecosystems. Effective methods for oil spillage recovery from offshore...
Microplastic Removal from Drinking Water Using Point-of-Use Devices
07/03/2023 -
The occurrence of microplastics in drinking water has drawn increasing attention due to their ubiquity and unresolved implications regarding human health. Despite achieving high reduction...
High vinyl polybutadiene rubber/polypropylene thermoplastic elastomer blends: Optimization of internal mixing process parameters and screening of processing methods
04/03/2023 -
Fabrication of braid?reinforced PVC hollow fiber membranes.AbstractIn this research, polyvinyl chloride (PVC) polymer was applied for the first time in the fabrication of braid?reinforced hollow...
The Material Matters: Sorption/Desorption Study of Selected Estrogens on Common Tubing or Sampling Materials Used in Water Sampling, Handling, Analysis or Treatment Technologies
06/03/2023 -
Plastic/rubber materials used as fasteners in equipment for analyzing or removing organic pollutants in water treatment technologies form an essential part of the device. Micropollutants in water are...
Intercalated rare earth hydrotalcite?like materials and their application in stabilizers in poly (vinyl chloride)
28/02/2023 -
The mechanism of action of hydrotalcite?like heat stabilizers is to absorb the HCl released during the thermal degradation of PVC and produce metal chloride. The intercalated itaconic acid roots lie...
Microwave dielectric heating affects the in?situ polymerization process of Nylon?6/Ag?NPs hybrid polymer nanocomposite
23/02/2023 -
Degradation and antifouling properties of PVC/PLA?HAp nanocomposite membraneAbstractDegradable membranes were obtained by blending of polyvinyl chloride (PVC) with poly lactic acid (PLA) as...
The effects of surface modified date?palm fiber fillers upon the thermo?physical performances of high density polyethylene?polyvinyl chloride blend with maleic anhydride as a grafting agent
23/02/2023 -
Prominent applications of chemical vapor deposition techniques for surface modification and functionalization of thin films and membranes.AbstractAdvanced materials are among the prime drivers for...
Generation of Flexible Multifunctional Electronic Textile Displaying Appropriate Fastness Properties Utilizing Single-Stage Inkjet Printing onto Cotton Fabric Pre-treated with PVC
23/02/2023 -
Electrically conductive printed textiles are gaining increasing interest and demand worldwide. Cotton fabric's porosity and high surface roughness avoid electrically conductive printed patterns on...
Comparison of toughening effects of several common toughening agents and polycarbonate?polydimethylsiloxane block copolymer on polyvinyl chloride
20/02/2023 -
In this work, different toughening agents such as chlorinated polyethylene (CPE), acrylonitrile–styrene?acrylate (ASA) terpolymer, acrylic modifier (ACR, the main component is poly(methyl...
Polymer Blends Based on 1-Hexadecyl-3-methyl Imidazolium 1,3-Dimethyl 5-Sulfoisophthalate Ionic Liquid: Thermo-Mechanical, Surface Morphology and Antibacterial Properties
16/02/2023 -
In this study, antibacterial polymer blends based on Polyvinyl Chloride (PVC) and Polystyrene-Ethylene-Butylene-Styrene (SEBS), loaded with the ionic liquid (IL) 1-hexadecyl-3-methyl imidazolium...
Enhancing the Initial Whiteness and Long-Term Thermal Stability of Polyvinyl Chloride by Utilizing Layered Double Hydroxides with Low Surface Basicity
19/02/2023 -
This study investigated the impact of surface basicity on the performance of layered double hydroxides (LDHs) as heat stabilizers for polyvinyl chloride (PVC). LDHs with varying surface basicity were...
Effects of Different Polymeric Materials on the Bacterial Attachment and Biofilm Formation in Anoxic Fixed-Bed Biofilm Reactors
-
Six biofilm carriers with different polymer were studied in fixed-film systems under anoxic conditions. Different media of polymers influence wastewater treatment performance. The aim of this study...
Silica Aerogel/Potassium Hexatitanate Whisker Composite Coated Fabric for Metallurgical Protective Clothing
15/02/2023 -
Silica aerogel/potassium hexatitanate whisker composite coated fabric was successfully prepared by polyacrylate coating, which could further improve the thermal insulation property of the fabric...
The Stationary Thermal Field in a Multilayer Elliptic Cylinder
11/02/2023 -
An analytical–numerical method for determining the two-dimensional (2D) thermal field in a layer-inhomogeneous elliptic cylinder (elliptical roller) was developed in the article. A...
Multiphysics Modeling Framework for Soft PVC Gel Sensors with Experimental Comparisons
09/02/2023 -
Polyvinyl chloride (PVC) gels have recently been found to exhibit mechanoelectrical transduction or sensing capabilities under compressive loading applications. This phenomenon is not wholly...
Structural and Optical Characterization of g-C3N4 Nanosheet Integrated PVC/PVP Polymer Nanocomposites
09/02/2023 -
The present work considers the integration of g-C3N4 nanosheets into PVC/PVP polymer nanocomposites at ratios of 0.0, 0.3, 0.6, and 1.0 wt%. The XRD data scans showed semicrystalline structures for...
Evaluation of the Effects of Different Packaging Materials on the Quality Attributes of the Tomato Fruit
06/02/2023 -
Post-harvest loss continues to be a significant problem in the food industry. Different packaging materials, designed to reduce fruit damage, are anticipated for various applications in the supply...
Morphology and Performance of PolyVinyl Chloride Thin Films Doped with Polyorganosilanes against Photodegradation
04/02/2023 -
The importance of polymeric additives has taken an important role in industrial technology and its development and the increase in the consumption period of industrial products, especially plastic...
The Adsorption and Desorption Behavior of Bisphenol A on Five Microplastics Under Simulated Gastrointestinal Conditions
-
Microplastics and endocrine-disrupting chemicals (EDCs) are two classes of emerging contaminants, and their compound combination effects pose a health threat to aquatic life. In this study, five...