Materiales
Materiales
Plasmonic Supramolecular Nanozyme?Based Bio?Cockleburs for Synergistic Therapy of Infected Diabetic Wounds
23/10/2024 -
The combination of the plasmonic?enhanced nanozyme catalysis and self?cascade reaction strategy is employed to construct a bimetallic nanozyme?based biomimetic nano?cocklebur (GNR@CeO2@GNPs) for...
Low?Cost Hyperelastic Fuller?Dome?Structured Nanocellulose Aerogels by Dual Templates for Personal Thermal Management
22/10/2024 -
A low?cost mechanically ultra?resilient cellulose?based aerogel with Fuller?dome?like structure is developed by a dual?template strategy. The aerogel shows a desired cost?performance combination of...
Fabrication of Bio?Based Composite Materials for Antimicrobial Cotton Fabric With Microbial Anti?Adhesive Activity
22/10/2024 -
ABSTRACTThe development of multifunctional cotton fabrics that are stain?resistant, antimicrobial, and easy to clean has sparked scientific interest as well as practical usefulness, owing to its...
Development of Supercapacitor Electrodes with High Strength via Inkjet Printing of Reduced Graphene Oxide/Aramid Nanofibers Membranes
23/10/2024 -
Supercapacitors (SCs), as emerging electrochemical energy storage devices, have garnered widespread attention due to their rapid charge–discharge characteristics and high power density. With the...
Surface Modification of Plain-Woven Ramie Fabrics Using Bridged Bis (3-Trimethoxysilylpropyl) Amine Silane for Improved Hydrophobicity
23/10/2024 -
Conventional silane treatment can increase the hydrophobicity of natural cellulosic fibers. This report employs a combination of alkali and dipodal silane treatments. Bridged bis...
On the Influence of Different Infill Pattern Structures on the Crashworthiness Performance of 3D Printed Tubes Subjected to Lateral Loading Condition
23/10/2024 -
The objective of this research is to investigate the effect of different infill pattern structures on the deformation behavior and crashworthiness performance of 3D-printed tubes under...
Diphenylphosphine oxide derivative with a symmetrical structure as an efficient flame retardant for application in epoxy resin
22/10/2024 -
Schematic illustration of the preparation process of three?type PANIs and their assembly of PANI?S//AC3:1 asymmetric supercapacitor device.AbstractIn this article, conductive polyaniline (PANI) was...
Synthesis of reaction promoters for epoxy polymerization: Enhancing storage stability and mechanical properties of one?pot epoxy systems
23/10/2024 -
The proposed possible interaction model of NaY zeolite, tartaric acid molecules with PVA chains.AbstractThe effects of sodium y zeolite (NaY?zeolite) on crosslinked Polyvinyl alcohol (CrPVA)...
Preparation and study of attapulgite reinforced PVA fiber with cross?linking of boric acid
23/10/2024 -
Polyaniline film electrodeposition sequence and electrochemical corrosion behavior.AbstractPolyaniline (PANI) films may be developed on metallic substrates by a variety of electrochemical techniques....
Evaluation of the excellent adsorption performance for lead ions of (sodium alginate/ waste para-aramid)-based polymer composite functionalized by ethylene diamine tetra (methylene phosphonic acid)
21/10/2024 -
Abstract With the rapid development of industry, efficient removal of heavy metal ions such as lead ions in wastewater has been attracted much attention in the fields of water...
Pyrazine substituted chitosan: an adsorbent material for the efficient removal of anionic dyes from aqueous solutions
23/10/2024 -
Abstract In the present work, a novel pyrazine based chitosan material was synthesized by functionalizing chitosan with chloroacetyl chloride and further modification with...
Composition of Sodium Alginate Films Containing Copper Oxide Nanoparticles Synthesized Using Aqueous Extract of Turnera subulata Sm and Evaluation of Their Healing Potential In Vivo
23/10/2024 -
Illustration of the process of obtaining CuO NPs using the aqueous extract of T. subulata.ABSTRACTSodium alginate is used in wound care because of its hydrogel?forming properties and ability to...
Tailoring the Mechanical Properties and Foaming Behaviors of PLA/P4HB Blends by Using P4HB?g?GMA as Compatibilizer
23/10/2024 -
ABSTRACTSynthetic poly(4?hydroxybutyrate) (P4HB), a flexible and biodegradable polymer, shows great promise in improving the toughness of poly(lactic acid) (PLA), but the inherent immiscibility of...
Crystal Evolution of Amorphous Poly(lactic acid) During Simultaneous Multi?step Tensile Deformation and Annealing
23/10/2024 -
ABSTRACTThe cold?crystallization and crystal evolution of amorphous poly(lactic acid) (PLA) are analyzed during multistep tensile deformation and annealing at 70°C using in situ synchrotron...
Effects of Enhanced Phytoremediation Techniques on Soil Aggregate Structure
24/10/2024 -
In response to the current serious problem of soil cadmium (Cd) contamination in agricultural land, phytoremediation technology is a green and environmentally friendly application prospect; however,...
Incorporation of Chokeberry Pomace into Baked Products: Influence on the Quality of the Dough and the Muffins
23/10/2024 -
The use of pomace in bakery products opens up new possibilities for the management of waste products from the fruit industry. Such activities are integral to the concept of sustainable development...
Medical- and Non-Medical-Grade Polycaprolactone Mesh Printing for Prolapse Repair: Establishment of Melt Electrowriting Prototype Parameters
23/10/2024 -
Pelvic organ prolapse (POP) occurs due to inadequate support of female pelvic organs and is often treated with synthetic implants. However, complications like infections, mesh shrinkage, and tissue...
Research on the Preparation of Dry Mixed Mortar Using Waste Incineration Fly Ash
24/10/2024 -
This study investigated the effect of water-washed municipal solid waste incineration fly ash (MSWI FA) as an admixture on the performance of dry mixed mortar and used X-ray diffraction (XRD) and...
Protective Effects of Carotenoid-Loaded Nanostructured Lipid Carriers Against Ochratoxin-A-Induced Cytotoxicity
22/10/2024 -
Ochratoxin A (OTA) is a mycotoxin produced by Aspergillus ochraceous and various Penicillium species, which are known for contaminating agricultural products and posing significant health risks,...
Enhancement of Corn Flour with Carob Bean for Innovative Gluten-Free Extruded Products
22/10/2024 -
The aim of this work is to study new, extruded products based on corn flour enriched with carob bean and the evaluation of its functional quality to develop novel gluten-free food products. Five...
Physicochemical Properties of Low-Molecular-Weight Homogalacturonan Pectin from Enzyme-Hydrolyzed Red Okra
22/10/2024 -
In this study, we focused on reducing the molecular weight of purified red okra pectin using various hydrolytic enzymes and evaluating its physicochemical properties or characterization. The enzyme...
