Materiales

 

Materiales

The Assessment of Abrasion Resistance of Casted Non-Ferrous Metals and Alloys with the Use of 3D Scanning
10/10/2024 - Three-dimensional scanning techniques are being more frequently used in modern industry, especially for quality control. This study shows the possibility of implementing 3D scanning as a tool for...
Structure, mechanical, and dielectric properties of polypropylene blended with ethylene and propylene?based elastomers
08/08/2024 - A PEK?C toughened epoxy adhesive system has been designed for bonding surface?treated CF/PEEK composites. The shear strength of CF/PEEK after a combination of sandpaper sanding and corona discharge...
Two?step preparation of phosphorus?containing organoclay and its effect on fire?resistant and mechanical properties of the flame?retardant polyethylene composite
27/05/2024 - Active thermoplastic resin bearing propenyl groups (RPEK?C) could participate in the crosslinking of BDM/DABPA to optimize the interface compatibility, combine the roles of toughening agent and...
Groundwater quality and hydrochemical characteristics in the upper Seybouse sub-basin, Northeast Algeria
07/03/2024 - The present study aims to evaluate the groundwater quality in an area characterized by significant human anthropic activities within the upper Seybouse. In order to assess the quality, a total of...
Preparation and characterization of transparent polyetherketone
06/12/2023 - Schematic of the shellac?based intragastric floating?retention drug delivery system.AbstractIntragastric floating?retention drug delivery system (IFRDDS) could effectively prolong drug?releasing...
Sulfonated Polyether Ketone Membranes Embedded with Nalidixic Acid—An Emerging Controlled Drug Releaser
01/09/2023 - The effective administration of medication has advanced over decades, but the medical community still faces significant demand. Burst release and inadequate assimilation are major drawbacks that...
Antifungal and ultraviolet–visible barrier properties in starch films reinforced with CuO nanoparticles
17/06/2023 - Dependence of the interlaminar fracture toughness G1C of CFRPs based on heat resistant polymers at different temperatures.AbstractHeat resistant thermoplastic matrices offer potential advantages over...
Automated Parallel Dialysis for Purification of Polymers
10/11/2022 - The implementation of a dialysis method for the simultaneous purification of different polymer materials in a commercially available automated parallel synthesizer (APS) is discussed. The efficiency...
Consumer Patterns of Sustainable Clothing Based on Theory of Reasoned Action: Evidence from Ecuador
09/11/2022 - Corporations need to understand the factors that influence purchase intention. The current study aimed to understand sustainable clothing patterns in Ecuador. A total of 343 Ecuadorian consumers...
Examining the Effect of Revenue Management on Customer Perceptions and Calculating the Service Performance Index: Food Order Application Example
29/10/2022 - In this research, the target is to create a “Service Performance Index” for food order mobile applications. In order to create the index, a structural equation model is...
Comparative Study of Friction and Wear Performance of PEK, PEEK and PEKK Binders in Tribological Coatings
25/09/2022 - Tribological coatings are widely used in industry, particularly when the conventional oil lubrication of sliding surfaces has to be replaced by maintenance-free contacts. This work studies the...
An investigation to enhance the mechanical property of high?performance thermoplastic composite through different plasma treatment
07/09/2022 - This study primarily aims to establish, evaluate and enhance the properties of carbon continuous fiber reinforced composites with polyetherketone as the high?performance thermoplastic resin. The...
Establishment of interlaminar structure and crack propagation in carbon fiber reinforced epoxy composites by interleaving CNTs/PEK?C film
29/08/2022 - The synergistic combination of carbon nanotubes (CNTs) and thermoplastic (TP) resin has shown the large potential in the improvement of fracture resistance for the epoxy matrix composites using the...
Novel thermally insulated ultra?lightweight fireproof and high impact resistance advanced hybrid composite
12/07/2022 - Development of thermally insulated ultra?lightweight fireproof composite.This work investigates the development of ultra?lightweight, hybrid fireproof composite material. The composite panels are...
UV curing: An alternative method for fixation of ??carotene containing microparticles substances onto cotton fabrics by acrylic binder
04/06/2022 - AbstractDelamination is always considered as a threat to the resin matrix composite laminates due to the nonvisibility from the outside. Much effort on the interleaving toughening has been made to...
Constructing a Digital Competence Evaluation Framework for In-Service Teachers’ Online Teaching
27/04/2022 - The focus on online teaching and teachers’ digital competence (DC) has reached a new level following the emergence of COVID-19 and its dramatic influence on the educational industry,...
Touchspinning: Mechanically drawing polyacrylonitrile nanofibers
28/03/2022 - Thermal conductivity modelAbstractIn this study, poly(aryl ether nitrile ketone)/functionalized boron nitride (PEK?CN/f?BN) composites fibers were prepared by solution blending followed by...
Improved Thermal and Electromagnetic Shielding of PEEK Composites by Hydroxylating PEK-C Grafted MWCNTs
25/03/2022 - With the rapid rise of new technologies such as 5G and artificial intelligence, electronic products are becoming smaller and higher power, and there is an increasing demand for electromagnetic...
Effect of different fiber combinations and optimisation of an ultra-high performance concrete (UHPC) mix applicable in structural elements
- In this study, Ultra-High Performance Concrete (UHPC) mix was optimised to expand its use in large-scale applications. Using alternative curing methods instead of heat treatment, it was aimed that...
Topology-guided synthesis and construction of amide-functionalized rare-earth metal–organic frameworks
- Topology is playing an important role for the reticular chemistry of metal–organic frameworks (MOFs). We herein report two isostructural rare-earth amide-functionalized MOFs by virtue of...
Shape Analysis of the Elastic Deformation Region throughout the Axi-Symmetric Wire Drawing Process of ETP Grade Copper
20/08/2021 - The wire drawing process is commonly perceived as one of the best studied metal forming processes in almost every aspect; however, when considering elastic deformation, researchers usually focus on...