Materiales
Materiales
Investigating the Impact Behavior of Carbon Fiber/Polymethacrylimide (PMI) Foam Sandwich Composites for Personal Protective Equipment
06/04/2024 -
To improve the shock resistance of personal protective equipment and reduce casualties due to shock wave accidents, this study prepared four types of carbon fiber/polymethacrylimide (PMI) foam...
Gallic acid—polyethyleneimine modified UHMWPE fibers with epoxy resin for investigating interfacial properties
02/04/2024 -
Abstract In this paper, a safe, non-toxic, and low-cost method was adopted to modify ultra-high molecular weight polyethylene (UHMWPE) fibers. gallic acid (GA) and...
Construction of core–shell?structured halloysite nanotubes with TiO2 nanoparticles for ultra?high?molecular?weight polyethylene (UHMWPE) nanocomposites with improved wear resistance
26/03/2024 -
The UHWMPE/HNTs@TiO2 nanocomposites with enhanced wear resistance.A hybrid of halloysite nanotubes decorated with titanium dioxide nanoparticles (HNTs@TiO2) was synthesized by the sol–gel method...
Biodegradable flexible conductive film based on sliver nanowires and PLA electrospun fibers
13/03/2024 -
The study indicates that 1?wt% polyethylene glycol (PEG) plays an internal lubrication role during the melt processing of ultrahigh?molecular?weight polyethylene (UHMWPE)/high?density polyethylene...
Structure and properties evolution of UV crosslinked ultra?high molecular weight polyethylene fiber during processing
12/03/2024 -
With the development of heat and creep?resistant UHMWPE fiber via UV crosslinking, its structure?properties evolution during processing needs attention. The structures of UHMWPE fiber in different...
Polymer Composites with Carbon Fillers Based on Coal Pitch and Petroleum Pitch Cokes: Structure, Electrical, Thermal, and Mechanical Properties
08/03/2024 -
The effect of particle size and oxidation degree of new carbon microfillers, based on coal pitch (CP) and petroleum pitch (PET) cokes, on the structure as well as thermal, mechanical, and electrical...
Investigating the effect of simultaneous incorporation of Al2O3 and B4C nanofillers in enhancing the wear performance of UHMWPE
02/03/2024 -
Hierarchical structures produced on the surface of a polymer film using nanoimprint lithography. The polymer film with hierarchical structures displays antibacterial properties.AbstractAntibacterial...
Influence of Varied MWCNTs Dispersion on EMI Shielding, UV Absorption, and Surface Properties of Electroless NiP/MWCNT-Coated UHMWPE Fabric
29/02/2024 -
The poor EMI shielding ability, limited UV resistance, and weak interfacial adhesion have restricted the use of Ultra-high molecular weight polyethylene (UHMWPE) fabric in ballistic, aviation, and...
Temperature and strain rate effects on ultra?high?molecular?weight?polyethylene compression: An experimental and modeling approach
24/02/2024 -
Experimental vs. TN Model predictions of UHMWPE compression at varied temperatures and strain rates.This study aims to predict the compression behavior of ultra?high molecular weight polyethylene...
Study on the resistance of UHMWPE laminates against oblique penetration of projectiles
12/02/2024 -
Performance of UHMWPE laminates against oblique penetration of projectiles.To solve the problem of the wall panel of high?performance shelters protecting against the oblique penetration of...
Ultra?high molecular weight polyethylene micro?ribbon fibers gel spun using orange terpenes
09/02/2024 -
Flat, micro?ribbon ultra?high molecular weight polyethylene fibers were gel spun using orange terpenes as a bio?derived solvent that achieved 4× greater tenacity than previous works. Morphological,...
The Development and Performance of Knitted Cool Fabric Based on Ultra-High Molecular Weight Polyethylene
25/01/2024 -
In order to withstand high-temperature environments, ultra-high molecular weight polyethylene (UHMWPE) fibers with cooling properties are being increasingly used in personal thermal management...
Anti-ultraviolet Properties of Weft-Knitted Textile Composite Materials Based on Modified Aramid and UHMWPE Fabrics
19/12/2023 -
The amide bonds of aramid fibers’ prolonged exposure to sunlight leads to the aging of the fibers and poor UV resistance. However, in most of the current studies, the improvement of UV...
Curing and thermal degradation behavior of epoxy?based vitrimers
16/12/2023 -
For the purpose of the development of ultrahigh molecular weight polyethylene (UHMWPE) fibers with improved tensile properties, the stearic acid (SA) was added to the gel spinning of UHMWPE and acted...
Experimental and numerical investigations of VO2?UHMWPE polymer composite plates across phase change temperature
20/12/2023 -
Experimental to numerical studies of VO2?UHMWPE polymer composite plates beyond phase change temperature.In the present study, experimental and numerical investigations are carried out on Vanadium...
Augmenting the mechanical performance of three?dimensional woven composites by the synergistic effect of fabric architecture and interfacial interaction of carbon nanotubes
13/12/2023 -
The role of 3D woven orthogonal fabric on the tensile behaviour of UHMWPE?epoxy composite is investigated. The addition of functionalised MWCNTs improves the tensile, flexural, and impact properties....
Mechanical, morphological, and numerical evaluation of biocompatible ultra?high molecular weight polyethylene/nano?zeolite nanocomposites
10/12/2023 -
Biocompatible ultra?high molecular weight polyethylene/nano?zeolite nanocomposites.The incorporation of bio?friendly nano?zeolite (NZ) into ultra?high molecular weight polyethylene (UHMWPE), renowned...
3?D woven rectangular hollow structure conformal bearing microstrip antenna with different heights: Design, preparation, performance, and simulation
10/12/2023 -
3?D woven rectangular hollow structure conformal bearing microstrip antenna with different heights: Design, performance, simulation and application.Traditional microstrip antennas have problems with...
Does a Compatibilizer Enhance the Properties of Carbon Fiber-Reinforced Composites?
03/12/2023 -
We have evaluated the effectiveness of compatibilizers in blends and composites produced using a solvent manufacturing process. The compatibilizers were two different types of polyethylene (linear...
Effect of tension during sulfonation stabilization for UHMWPE-derived carbon fibers
21/11/2023 -
Abstract Polyethylene is a promising low-cost alternative precursor material for carbon fiber production, but it has yet to show mechanical properties near or surpassing...
Optimization the Stab Resistance and Flexibility of Ultra-High Molecular Weight Polyethylene Knitted Structure Fabric with Response Surface Method
23/11/2023 -
At present, the challenging issue of the compatibility between stab resistance and flexibility of materials frequently appears. Thus, this study proposes a novel method to enhance the comprehensive...
