Materiales

Materiales

ISO 12017:2021 - Plastics — Poly(methyl methacrylate) double- and triple-skin sheets — Test methods
01/06/2021 - This document specifies the test methods for quality control of poly(methyl methacrylate) (PMMA) extruded double- and triple-skin flat sheets, obtained from colourless and coloured transparent,...
ISO 7823-3:2021 - Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 3: Continuous cast sheets
01/06/2021 - This document specifies requirements for non-modified flat poly(methyl methacrylate) (PMMA) continuous cast sheets for general-purpose use. The sheets can be colourless or coloured, and can be...
F451 Standard Specification for Acrylic Bone Cement has been revised to F451-21
- Abstract This specification covers self-curing resins used primarily for the fixation of internal orthopedic prostheses. While a variety of copolymers and comonomers may be...
D6083/D6083M Standard Specification for Liquid-Applied Acrylic Coating Used in Roofing has been revised to D6083/D6083M-21
- 1. Scope 1.1 This specification covers liquid-applied water-dispersed acrylic latex elastomeric protective roof coatings. 1.2 This specification does not...
F2118 Standard Test Method for Constant Amplitude of Force Controlled Fatigue Testing of Acrylic Bone Cement Materials has been reapproved, available as F2118-14(2020)
- Significance and Use 5.1 This test method describes a uniaxial, constant amplitude, fully reversed fatigue test to characterize the fatigue performance of a uniform...
ISO 24026-1:2020 - Plastics — Poly(methyl methacrylate) (PMMA) moulding and extrusion materials — Part 1: Designation system and basis for specifications
01/05/2020 - This document establishes a system of designation for poly(methyl methacrylate) (PMMA) thermoplastic material, which can be used as the basis for specifications.The types of PMMA plastic...
ISO 24026-2:2020 - Plastics — Poly(methyl methacrylate) (PMMA) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
01/05/2020 - 1.1 This document specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of poly(methyl methacrylate) (PMMA) moulding and...
D6083/D6083M Standard Specification for Liquid Applied Acrylic Coating Used in Roofing has been reinstated as D6083/D6083M-18
- Abstract This specification covers testing and material properties of water-dispersed protective roof coatings composed of a water-based acrylic latex elastomeric emulsion...
Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings (ISO 2507-3:1995)
- Specifies the particular test conditions for determining the Vicat softening temperature of ABS and ASA pipes and fittings (the general test method is given in ISO 2507-1). Also gives, for...
F451 Standard Specification for Acrylic Bone Cement has been revised to F451-16
- Abstract This specification covers self-curing resins used primarily for the fixation of internal orthopedic prostheses. While a variety of copolymers and comonomers may be...
D788 Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds has been revised to D788-16
- Abstract The purpose of this classification system is to provide a method of adequately identifying poly(methyl methacrylate) (PMMA) molding and extrusion compounds. These...
D4802 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet has been revised to D4802-16
- Abstract This specification covers monolithic methacrylate sheets produced by various processes. For this specification, methacrylate sheet shall be composed of polymerized...
D4802 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet has been revised to D4802-15
- Abstract This specification covers monolithic methacrylate sheets produced by various processes. For this specification, methacrylate sheet shall be composed of polymerized...
D4094 Standard Test Method for Acid Content of Ethylene-Acrylic Acid Copolymers (Withdrawn 2015) has been withdrawn, with no replacement. D4094-
- Withdrawn Rationale: This test method covers the determination of the acid content of ethylene-acrylic acid (EAA) copolymers containing 2.5 to 25 weight % of acrylic...
D788 Standard Classification System for Poly#40;Methyl Methacrylate#41; #40;PMMA#41; Molding and Extrusion Compounds has been revised to D788-14
- Abstract The purpose of this classification system is to provide a method of adequately identifying poly(methyl methacrylate) (PMMA) molding and extrusion compounds. These...
D788 Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds has been revised to D788-12
- Abstract The purpose of this classification system is to provide a method of adequately identifying poly(methyl methacrylate) (PMMA) molding and extrusion compounds. These compounds are...
D788 Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds has been revised to D788-11
- Abstract The purpose of this classification system is to provide a method of adequately identifying poly(methyl methacrylate) (PMMA) molding and extrusion compounds. These compounds are...