Materiales
Materiales
Polymeric Nanosystems: A Breakthrough Approach to Treating Inflammation and Inflammation Related Diseases
19/03/2025 -
This paper explores polymeric nanosystems (PN) as a solution to challenges with traditional anti‐inflammatory drugs (AID). PN offer improved biocompatibility, low toxicity, and targeted AID...
Thermoplastic Polyurethane‐Oleic Acid (TPU‐OLE) Membranes for Guided Bone Regeneration
18/03/2025 -
ABSTRACTGuided bone regeneration (GBR) is a regenerative surgical procedure in dentistry and orthopedics. The aim of this study is to fabricate a novel nano‐textured, hydrophilic thermoplastic...
Green Highly Porous Bio‐Zr‐MOF/Fabric Composites for Organophosphonates Detoxification
19/03/2025 -
Discover a sustainable solution for tackling toxic organophosphates. Using bio‐based linkers and water as a solvent, we synthesize eco‐friendly Zr‐fumarate and MIP‐202 composites on fabric,...
Metabolite biomarkers of screening neonatal congenital hypothyroidism based on dried blood spot metabolomics
-
Congenital hypothyroidism (CH) can be detected early during thyroid-stimulating hormone (TSH) screening based on dried blood spot (DBS) samples. However, it falls short in differentiating between...
Bioengineered Tumor‐Stroma Prostate Cancer In Vitro Models for Screening Therapeutics
13/03/2025 -
This study presents the establishment of 3D bioengineered prostate cancer tumor‐stroma spheroid models, designed to more accurately replicate the complex interactions between cancer cells and the...
Unraveling Cytotoxicity in HEK293 Cells During Recombinant AAV Production for Gene Therapy Applications
13/03/2025 -
Graphical Abstract and Lay SummaryIn this study, we demonstrated the activation of apoptosis in HEK293 cells during the production of rAAV particles via transient transfection. Chemical inhibition of...
Improved Foaming Performance of Thermoplastic Polyether Amide Elastomers via Chain Extension: Toward Self‐Powered Intelligent Footwear
12/03/2025 -
Polyamide 6‐based thermoplastic elastomers (TPAE) with superior tensile strength and elongation‐at‐break are successfully synthesized by one‐pot melt polycondensation. Two different types of...
Isolation of bovine milk–derived extracellular vesicles via a capillary-channeled polymer (C-CP) fiber stationary phase
-
Extracellular vesicles (EVs) are released by all cell types into the extracellular environment. A subset of EVs, known as exosomes, range in size from 30 to 200 nm and are of biochemical...
Preparation and characterization of a certified reference material of toxic elements in cannabis leaves
-
The quantification of harmful elements in cannabis is a relevant analytical task that requires metrological tools to ensure the reliability of the measurement results. This work reports the...
Spray Deposition for Solvent Annealing of Hybrid Poly(3,4‐Ethylenedioxythiophene) Polystyrene Sulfonate Cellulose Silver Nanowire Composite Electrodes Using a Roll‐to‐Roll Coater
07/03/2025 -
The fabrication and post‐treatment via solvent annealing of poly(3,4‐ethylenedioxythiophene) polystyrene sulfonate‐based electrodes using spray deposition in a roll‐to‐roll setup are...
Optimization of Process Parameters to Minimize Porosity and Splash in Cold Metal Transfer and Pulse Wire Arc Additive Manufacturing of High‐Strength Aluminum Alloy
06/03/2025 -
This study employs cold metal transfer and pulsed arc additive manufacturing to fabricate thin‐walled workpieces of 2024 aluminum alloy. Fitting models was developed by integrating response surface...
Morphology Optimization of Spinel Catalysts for High‐Efficiency Photothermal Catalytic Upcycling of Polyethylene Terephthalate
09/03/2025 -
Three morphologies of spinel catalysts for the decomposition of polyethylene terephthalate (PET) are prepared by hydrothermal method. The optimization of morphology made a positive impact on PET...
On‐demand Reprogrammable Mechanical Metamaterial Driven by Structure Performance Relations (Adv. Mater. 9/2025)
05/03/2025 -
Mechanical MetamaterialIn article number 2410865, Fei Pan, Yuli Chen, and co‐workers propose an automatically on‐demand reprogrammable mechanical metamaterial. Driven by the pre‐established...
Development and Characterization of Starch‐Based Chitosan Reinforced Composite for Food Packaging Application
05/03/2025 -
ABSTRACTThis study considers the development of composite from biodegradable bioplastic obtained from waste starch reinforced with chitosan obtained from snail shells. About 30 g of the starch,...
Reinforced Polymer Composite Filaments in Fused Deposition Modeling of 3D Printing Technology: A Review
03/03/2025 -
The review article highlights the advancements and potential of composite materials in fused deposition modeling 3D printing. Composite filaments offer improved mechanical properties and diverse...
Fabrication and Investigation on Mechanical, Electrical, and Sensing Performance of Polydimethylsiloxane/Carbon Nanotube and Thermoplastic Polyurethane/Carbon Nanotube Wearable Strain Sensors
03/03/2025 -
In the present study, polydimethylsiloxane/carbon nanotube (PDMS/CNT) and thermoplastic polyurethane (TPU)/CNT sandwich‐structured strain sensors are obtained through two‐step solution mixing....
Ultra‐High Bending Angle of Miniaturized Piezoelectric Actuator Screen‐Printed on Stiff Substrate
27/02/2025 -
The miniaturization of electroactive soft polymer bending actuators is highly desirable as their fields of application are very broad. However, challenges such as performance loss limit their...
Fabrication of Stretchable and Conductive Liquid Metal Microfibers through Coaxial Emulsion Electrospinning
27/02/2025 -
This work conducts a systematic study on the emulsion electrospinning process of liquid metal fibers with diameters in the range of 10–100 μm. Key processing parameters such as core and sheath...
Facile Synthesis of Fe0.64Ni0.36/NiFe2O4/CeO2‐Codoped Bamboo Powders‐Derived Porous Carbon Composites with Optimized Impedance Matching for Enhanced Microwave Absorption Performance
27/02/2025 -
The microstructure and electromagnetic properties of the composites are effectively controlled by adjusting the heat treatment temperature and magnetic components. Benefiting from the multiple loss...
Mixed Electrolyte Enabling Ultrafast Mass Transport and Compatibility with Polypropylene Separator for Stable and Low‐Cost Aluminum Ion Battery
03/03/2025 -
A mixed electrolyte (IL‐FB (1:5)) for aluminum ion batteries is synthesized by incorporating fluorobenzene into ionic liquid electrolyte. The IL‐FB (1:5) promotes mass transport, enabling cycling...
