Materiales

Materiales

Study on the Effect of Foam Stability on the Properties of Foamed Lightweight Soils
15/09/2023 - The properties of prepared foamed lightweight soils (FLSs) using prefabricated foam requires high foam stability. This paper investigates the geometrical characteristics of different foam densities,...
Foaming with Starch: Exploring Faba Bean Aquafaba as a Green Alternative
11/09/2023 - The demand for sustainable and functional plant-based products is on the rise. Plant proteins and polysaccharides often provide emulsification and stabilization properties to food and food...
A Study on the Oil-Bearing Stability of Salt-Resistant Foam and an Explanation of the Viscoelastic Phenomenon
30/08/2023 - Foam is a medium-stable system composed of gas and liquid phases, which has the advantages of low density at the gas phase and high viscosity at the liquid phase, and has a wide application in oil...
Effect of Janus Nanosheets in Polypropylene on Rheological Properties and Autoclave Foam Performance
17/08/2023 - Our experiment revealed that the addition of Janus nanosheets to polypropylene (PP) has a significant impact on the viscoelasticity of the composite system. Specifically, when 0.10 wt% of Janus...
Evaluation of Foam Gel Compound Profile Control and Flooding Technology in Low-Permeability Reservoirs
11/08/2023 - In the waterflooding development of fractured ultra-low permeability reservoirs, the heterogeneity is becoming increasingly serious. The development of large fracture channels leads to serious water...
Ultra-Low-Density Drilling Fluids for Low-Pressure Coefficient Formations: Synergistic Effects of Surfactants and Hollow Glass Microspheres
17/07/2023 - With the increase in drilling fluid density requirements in low-pressure coefficient formations, traditional hollow bead drilling fluids and foam drilling fluids each have different degrees of...
Self?foaming polyurea foams reinforced by nano SiO2 via a non?isocyanate route
09/07/2023 - The feedstocks for conventional polyurea foams (PUrFs) are limited but they have more choices in urea route as discribed in this work. Urea, ternary amine T403 and diaminodecane DA?10 were used for...
Study on the foaming behavior of density?controllable epoxy resin composite foam under negative pressure environment
24/06/2023 - A novel, clean, green and non?toxic negative pressure foaming strategy. Epoxy resin composite foam (ERCF) was prepared without adding foaming agent, using modified calcium silicate particles with...
Study on Alkali-Activated Prefabricated Building Recycled Concrete Powder for Foamed Lightweight Soils
02/06/2023 - The advantage of a prefabricated building is its ease of construction. Concrete is one of the essential components of prefabricated buildings. A large amount of waste concrete from prefabricated...
Development of Alkali Activated Inorganic Foams Based on Construction and Demolition Wastes for Thermal Insulation Applications
30/05/2023 - Nowadays, the construction industry is challenged not only by increasingly strict environmental regulations, but also by a shortage of raw materials and additives. It is critical to find new sources...
Synthesis of oxime ester?based epoxy resin with chemical recyclability
23/05/2023 - AbstractThe aim of this study was to develop a solvent?free polylactic acid (PLA) open?cell porous scaffold for bone tissue engineering using compression molding and a new chemical foaming compound,...
Preparation of high?performance natural rubber composites: Plasma?foaming agent?modified kaolin and flash?drying technology
18/05/2023 - Oxidation of hydrazine through conducting polymers studied electrochemically and through DFT.AbstractThis work presents a comparative experimental and theoretical study on the use of polyaniline and...
Development of electrospun filter with high efficiency to reduce disturbance on gas detection in dusty environments
17/05/2023 - Preparation of high?performance natural rubber composites: Plasma?foaming agent?modified kaolin and flash?drying technology.AbstractA combination of plasma?foaming double dispersion method, flash...
Study on Efficient Degradation of Waste PU Foam
18/05/2023 - In this paper, the high-efficiency degradation and alcoholysis recovery of waste polyurethane foam were realized using a combination of a high-efficiency alkali metal catalyst (CsOH) and...
Effect of Ca and Mg on the properties of foamed ceramics prepared with multi?solid waste
21/04/2023 - With vanadium tailings and lead?zinc tailings as the main raw materials, gold tailings, waste glass powder, other fluxes and SiC foaming agents are added to prepare foamed ceramics. The effects of Ca...
Antimicrobial and UV protective chitosan/lignin multilayer nanocoating with immobilized silver nanoparticles
07/04/2023 - AbstractOne?step extrusion foaming process of biodegradable poly(lactic acid) (PLA)?based nanocomposites in the presence of chemical foaming agent and chain extender has great complexity to control....
Formation of Conductive Network in Urea?formaldehyde/Carbon Nanotube Composite Foams for Electromagnetic Shielding
06/04/2023 - Due to advantages of low cost and intrinsic flame retardancy, urea?formaldehyde (UF) foams with electromagnetic shielding function present a promising application prospect in field of construction,...
Preparation of foamed ceramics from steel slag with high calcium and iron content
04/04/2023 - In this paper, steel slag foamed ceramics were fabricated by using steel slag, kaolin, feldspar and quartz as main raw materials, and adding SiC as high?temperature foaming agent. The effects of...
Radiation crosslinked ethylene vinyl acetate composite with binary flame retardant: The improved performance and mechanisms
06/03/2023 - Irradiated EVA/MCA/MHPA can effectively reduce CO and heat generated by combustion and produce compact shell.In this article, ethylene vinyl acetate/aluminum hydroxide/melamine cyanurate...
Morphological, Mechanical and Thermal Properties of Rubber Foams: A Review Based on Recent Investigations
26/02/2023 - During recent decades, rubber foams have found their way into several areas of the modern world because these materials have interesting properties such as high flexibility, elasticity, deformability...
Fabrication of SiC Porous Ceramics by Foaming Method
04/02/2023 - In this work, hierarchically porous SiC ceramics were prepared via the foaming method. Porous ceramics with tunable, uniform, and bimodal pore structures were successfully fabricated in a facile way....