Materiales
Materiales
Fabrication of Graphene Oxide Reinforced Biocomposite: Recycling of Postconsumed Footwear Leather
28/09/2023 -
The increasing concerns about solid waste disposal have led to the development of innovative strategies for repurposing waste materials. This paper describes a simple solution casting process for...
Fused Deposition Modeling of Single?Use Plastic Alloy
14/02/2023 -
Packaging plastics are called ‘single?use plastics’ because of short lifetime. Among which, the three plastics of polyethylene (PE), polypropylene (PP), and polyethylene terephthalate (PET) take...
Anti?fouling capacity enhancement of thin?film composite polyamide membrane by chitosan graft polymerization methods
04/05/2024 -
Enhancing the mechanical and foaming properties of PBAT/P4HB blends through the addition of P4HB?g?GMA compatibilizer.AbstractPoly(butylene?adipate?co?terephthalate) (PBAT) is recognized for its...
Development of binary and ternary polyester shape memory blends for additive manufacturing
26/04/2024 -
Abstract The goal of this work was to create shape memory polymer blends for the additive manufacturing technology of fused filament fabrication. An iterative approach was taken...
Injection Molding Condition Effects on the Mechanical Properties of Coconut-Wood-Powder-Based Polymer Composite
27/04/2024 -
This study investigates the mechanical properties of coconut sawdust powder combined with polypropylene (PP). The effect of compatibility content, wood powder (WP) content, and injection molding...
Study on interfacial compatibilizing effect of PB grafts on PB/GNP thermally conductive composites
26/04/2024 -
The compatibilizing mechanism of PB?g?MAH?co?St and its effect on improving conductivity of PB/GNP composites.Using polymer?grafts to improve the interfacial compatibilization of composites is by far...
One?pot synthesis of aluminum phosphate?supported, chitosan?linked expandable graphite as a novel flame retardant for textile
24/04/2024 -
The distribution of spray?dried cellulose nanocrystal particles in polypropylene can be probed by water absorption and the crystallization behaviors of the composites.AbstractUnderstanding the...
Preparation and characterization of hybrid PLA biocomposites reinforced by wood and silane treated basalt fibers or compatibilized by maleic anhydride?grafted polypropylene (MAPP)
22/04/2024 -
Silane and maleic anhydride compatibilization improves physical and mechanical properties of wood/basalt fibres hybrid polylactic acid biocomposites.In this study, basalt and/or beech wood fibers...
Compatibilization of Polyamide 6/Cyclic Olefinic Copolymer Blends for the Development of Multifunctional Thermoplastic Composites with Self-Healing Capability
18/04/2024 -
This study investigated the self-healing properties of PA6/COC blends, in particular, the impact of three compatibilizers on the rheological, microstructural, and thermomechanical properties. Dynamic...
Thermally-Activated Shape Memory Behavior of Biodegradable Blends Based on Plasticized PLA and Thermoplastic Starch
16/04/2024 -
Biodegradable blends based on plasticized poly(lactic acid) PLA and thermoplastic starch (TPS) have been obtained. The influence of the PLA plasticizer as a compatibility agent has been studied by...
Recycling Polyethylene/Polyamide Multilayer Films with Poly(isoprene-g-Maleic Anhydride) Compatibilizer
12/04/2024 -
Polymers generally form incompatible mixtures that make the process of recycling difficult, especially the mechanical recycling of mixed plastic waste. One of the most commonly used films in the...
Analysis on Isotropic and Anisotropic Samples of Polypropylene/Polyethyleneterephthalate Blend/Graphene Nanoplatelets Nanocomposites: Effects of a Rubbery Compatibilizer
14/04/2024 -
Over the past few years, polymer nanocomposites have garnered a significant amount of interest from both the scientific community and industry due to their remarkable versatility and wide range of...
Comparison of mechanical and tribological properties of glass-fiber-reinforced polyketone and polyketone/polyamide 6 blend composites
08/04/2024 -
In this study, the impact of two compatibilizers, ethylene terpolymer (C1) and maleic anhydride grafted polyethylene (C2), on the mechanical, thermal, and tribological properties of 30%...
Improvement of mechanical properties of highly ZnO?filled polyethylene composites by dual?compatibilizer for hydrogen sulfide permeation inhibition
04/04/2024 -
Transportation of acidic fluids containing hydrogen sulfide (H2S) by flexible reinforced thermoplastic pipes can cause safety problems due to diffusion of H2S in the pipe. Herein, high?density...
An assessment of the role of nanosilica in thermal/thermo?oxidative degradation mechanism of poly(lactic acid)/polybutylene adipate terephthalate blend nanocomposites
04/04/2024 -
As a packaging materials candidate, based on a polylactic acid/ polybutylene adipate terephthalate (PLA/PBAT) blends (90/10 and 75/25 wt/wt) containing 1, 3, and 5 phr hydrophilic (HPL) and...
Influence of esterified kraft lignin as an interfacial compatibilizer on mechanical properties of acrylonitrile–butadiene–styrene/basalt fiber composites
28/03/2024 -
Research methodology.AbstractThe resin curing process triggered by ultraviolet radiation possesses numerous advantages, including rapid speed, low cost, and minimal environmental impact. Due to the...
Preparation of oxidized polyethylene wax from polyethylene wax by SCCO2-assisted foam method: structural characteristics, reaction mechanism and properties
30/03/2024 -
Abstract Polyethylene wax (PEW) serves as a versatile material modifier, and the newly acquired polarity functions after functionalization are of great interest. Furthermore,...
Development of antibacterial edible films for food packaging using tragacanth gum, carrageenan, and clove essential oil
27/03/2024 -
Acrylonitrile butadiene styrene (ABS) composites were reinforced with basalt fiber (BF) and modified kraft lignin. Lignin was modified by adjusting the length of side?chain (C2?C4), and its function...
Development of a Polypropylene-Based Material with Flame-Retardant Properties for 3D Printing
21/03/2024 -
In this study, a nanocomposite based on a heterophasic polypropylene copolymer containing 5 wt% of nanoclays and 3 wt% of compatibilizer was formulated via melt compounding to obtain a material...
Dynamically vulcanized CNC?reinforced thermoplastic elastomer based on PP/EPDM: Morphology and mechanical properties control via interfacial compatibilization
20/03/2024 -
Examining various properties of PP/EPDM TPV enhanced with interfacial compatibilizers and cellulose nanocrystals, while establishing correlations between morphology and these properties.In this...
