Materiales

 

Materiales

ISO 9854-2:2023 - Thermoplastics pipes for the transport of fluids — Determination of Charpy impact properties — Part 2: Test conditions for pipes of various materials
- This document specifies the values or options chosen for the test parameters (i.e. the impact energy, specimen dimensions, specimen type, specimen supports and test temperature) for both...
ISO 24048:2022 - Plastics — Determination of bound acrylonitrile content in the continuous phase of acrylonitrile-butadiene-styrene (ABS) by Dumas combustion method
- This document specifies a method for the determination of bound acrylonitrile content in the continuous phase of acrylonitrile-butadiene-styrene (ABS) copolymer using Dumas combustion method....
D3965 Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings has been revised to D3965-21
- Abstract This specification covers materials made from only virgin ABS polymers and blends of ABS polymers suitable for use in the extrusion of pipe and molding of...
F2969 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) IPS Dimensioned Pressure Pipe has been reapproved, available as F2969-12(2020)
- Abstract This specification covers acrylonitrile-butadiene-styrene (ABS) IPS dimensioned pressure pipe produced by single extrusion in standard thermoplastic pipe dimension...
F2806 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR) has been revised to F2806-20
- 1. Scope 1.1 This specification covers acrylonitrile-butadiene-styrene (ABS) pipe produced by single extrusion in standard thermoplastic pipe dimension ratios and...
ISO 19062-2:2019 - Plastics -- Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
- This document specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of acrylonitrile-butadiene-styrene (ABS) moulding and...
F628 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core has been editorially changed, available as F628-12e3
- Abstract This specification covers coextruded acrylonitrile-butadiene-styrene (ABS) plastic drain, waste, and vent pipes made to Schedule 40 iron pipe sizes (IPS) with...
ISO/FDIS 19062-2 - Plastics -- Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
- Plastics -- Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings (ISO 2507-3:1995)
- Specifies the particular test conditions for determining the Vicat softening temperature of ABS and ASA pipes and fittings (the general test method is given in ISO 2507-1). Also gives, for...
D2235 Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings has been reapproved, available as D2235-04(2016)
- 1. Scope 1.1 This specification covers solvent cement for joining acrylonitrile-butadiene styrene (ABS) plastic pipe and fittings for pressure and nonpressure...
D3138 Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components has been reapproved, available as D3138-04(2016)
- Abstract This specification provides general requirements for solvent cements used in joining acrylonitrile-butadiene-styrene (ABS) plastic pipe or fittings to poly(vinyl...
D5508 Standard Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC) has been revised to D5508-16
- Significance and Use 4.1 A measurement of the residual acrylonitrile in nitrile rubbers (NBR), styrene-acrylonitrile copolymers or ABS terpolymers will determine the...
D3965 Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings has been revised to D3965-16
- Abstract This specification covers materials made from only virgin ABS polymers and blends of ABS polymers suitable for use in the extrusion of pipe and molding of...
D4673 Standard Classification System for and Basis for Specification for Acrylonitrile#x2013;Butadiene#x2013;Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials has been revised (with title change) to D4673-16
- Abstract This classification system covers only acrylonitrile-butadiene-styrene (ABS) materials and ABS alloys suitable for injection molding and extrusion. Some of these...