Materiales
Materiales
Systematic evaluation of a sustainable plasticizer derived from coconut shell bio-waste in a reinforced styrene butadiene copolymer system
02/06/2023 -
Abstract The utilization of copiously available bio-waste significantly contributes to sustainable development and solid waste management. In the present study, the pyrolytic...
Bioaugmentation of Aerobic Granular Sludge with Dye-Decolorizing Yeast for Textile Industrial Wastewater
29/05/2023 -
A sequencing batch reactor (SBR) inoculated with activated sludge and bioaugmented with a dye-decolorizing yeast strain—Yarrowia lipolytica (HOMOGST27AB) was assembled to form...
Old Landfill Leachate and Municipal Wastewater Co-Treatment by Sequencing Batch Reactor Combined with Coagulation–Flocculation Using Novel Flocculant
18/05/2023 -
The use of novel flocculants in combination with a sequencing batch reactor (SBR) for the treatment of landfill leachate and municipal wastewater has been shown to be an effective method for reducing...
Flexure Performance of Ferrocement Panels Using SBR Latex and Polypropylene Fibers with PVC and Iron Welded Meshes
14/05/2023 -
Ferrocement panels are thin-section panels that are widely used in lightweight construction. Due to lesser flexural stiffness, they are susceptible to surface cracking. Water may penetrate through...
Effect of Silica Nanoparticles and Modified Silica Nanoparticles on the Mechanical and Swelling Properties of EPDM/SBR Blend Nanocomposites
05/05/2023 -
The influences of nanosilica and modified nanosilica on cure, compression set, mechanical and swelling characteristics are studied in blends of ethylene-propylene-diene monomer...
Optimization of Simultaneous Nutrients and Chemical Oxygen Demand Removal from Anaerobically Digested Liquid Dairy Manure in a Two-Step Fed Sequencing Batch Reactor System Using Taguchi Method and Grey Relational Analysis
-
Abstract The technological development for efficient nutrient removal from liquid dairy manure is critical to a sustainable dairy industry. A nutrient removal process using a...
Experimental measurement of moisture distribution in the adhesive layer using near?infrared spectroscopy
25/04/2023 -
Preparation of epoxy styrene butadiene latex with different epoxidation degrees and its toughening effect on epoxy resins.AbstractTo improve toughness, crack resistance, and other mechanical...
Synthesis and performance evaluation of water?absorbing resin coated with polymethyl methacrylate as a lost circulation material
18/04/2023 -
AbstractPolymers are part and parcel of our life and society due to the immense applications resulting from their unique properties. High performing products based on bio feed stocks have gained...
A Novel Approach for Simulation and Optimization of Rubber Vulcanization
31/03/2023 -
The kinetic model, encompassing the curing and reversion phenomena of the NR/SBR rubber vulcanization process, was developed by means of the finite element method simultaneously with heat transfer...
EM Scattering of A Target above Canyon/Valley Environment Based on Composite Rough Surface Modeling Method and Modified SBR-FBSSA Algorithm
30/03/2023 -
The composite electromagnetic (EM) scattering characteristics from a target above a canyon/valley environment are significant. Aiming to acquire the composite EM scattering efficiently and...
Evaluating the Effects of Polyphosphoric Acid (PPA) on the Anti-Ultraviolet Aging Properties of SBR-Modified Asphalt
30/03/2023 -
The ultraviolet (UV) aging of asphalt is an important factor affecting the long-term performance of asphalt pavement, especially in high altitude cold regions. The current studies have reported that...
Exploring the Potential Hormonal Effects of Tire Polymers (TPs) on Different Species Based on a Theoretical Computational Approach
30/03/2023 -
Tire polymers (TPs) are the most prevalent type of microplastics and are of great concern due to their potential environmental risks. This study aims to determine the toxicity of TPs with the help of...
One-Pot Syntheses of PET-Based Plasticizer and Tetramethyl Thiuram Monosulfide (TMTS) as Vulcanization Accelerator for Rubber Production
29/03/2023 -
Styrene-butadiene (SBR) and acrylonitrile-butadiene (NBR) rubber blends with tetramethyl thiuram disulfide (TMTD) and tetramethyl thiuram monosulfide (TMTS) accelerators and environmentally friendly...
Dynamic mechanical properties in natural rubber/styrene?butadiene rubber blends: The local strain behavior in the glass transition region
11/03/2023 -
Normalized local strain of the NR phase for the blends NR10/SBR90, NR30/SBR70, NR50/SBR50 and NR70/SBR30 as a function of temperature, for samples vulcanized at 170°C.A study of the local strains...
Parametrical Function Describing Influences of the Redistribution of Incorporated Oil for Rupture Process Reconstruction in Rubber
09/03/2023 -
The present work is focused on finding (i) the tearing energy at rupture and (ii) the redistribution of incorporated paraffin oil on the ruptured surfaces as functions of (a) the initial oil...
The Material Matters: Sorption/Desorption Study of Selected Estrogens on Common Tubing or Sampling Materials Used in Water Sampling, Handling, Analysis or Treatment Technologies
06/03/2023 -
Plastic/rubber materials used as fasteners in equipment for analyzing or removing organic pollutants in water treatment technologies form an essential part of the device. Micropollutants in water are...
A Study on Development of New Type Rubber Boot for Sleeper Floating Track System (STEDEF): Materials and Shapes
27/02/2023 -
Urban railway sleeper floating track (STEDEF) reduces the block vibration transmitted to the subgrade structure by structurally separating the sleeper and the concrete bed, using a rubber boot and a...
Dispersion Homogeneity of Silicon Anode Slurries with Various Binders for Li-Ion Battery Anode Coating
24/02/2023 -
We aimed to determine the relationship between surface chemistry and the rheological properties of silicon anode slurries in lithium-ion batteries. To accomplish this, we investigated the use of...
An investigation on Moringa oleifera fruit (drumstick)?derived cellulose micro and nanofiber reinforced styrene butadiene rubber composites
25/02/2023 -
For the first time, Moringa oleifera fruit (drumstick) derived cellulose micro and nanofibers were used for the reinforcement of nonpolar styrene butadiene rubber.The current focus in the elastomer...
Study on the Mechanism and Experiment of Styrene Butadiene Rubber Reinforcement by Spent Fluid Catalytic Cracking Catalyst
17/02/2023 -
Spent Fluid Catalytic Cracking (FCC) Catalyst is a major waste in the field of the petroleum processing field, with a large output and serious pollution. The treatment cost of these waste catalysts...
Life Cycle Assessment of Black and Greywater Treatment Solutions for Remote and Sensitive Areas
20/02/2023 -
Sensitive and remote areas have come under pressure from growing populations and tourism, often resulting in improper wastewater management. Efficiency, durability, the use of renewable construction...
