Materiales
Materiales
The Synergistic Effect of Carbon Black/Carbon Nanotube Hybrid Fillers on the Physical and Mechanical Properties of EPDM Composites after Exposure to High-Pressure Hydrogen Gas
11/04/2024 -
This study investigated the synergistic effect of carbon black/multi-wall carbon nanotube (CB/MWCNT) hybrid fillers on the physical and mechanical properties of Ethylene propylene diene rubber (EPDM)...
Effects of fluorene-9-bisphenol exposure on anxiety-like and social behavior in mice and protective potential of exogenous melatonin
04/04/2024 -
Fluorene-9-bisphenol (BHPF) is widely used in the manufacture of plastic products and potentially disrupts several physiological processes, but its biological effects on social behavior remain...
Ground tire rubber and coffee silverskin as sustainable fillers in EPDM compounds for rubber?to?steel bonded systems in roofing applications
29/03/2024 -
Sustainable fillers in rubber?to?steel bonded systems for roofing applications.In this paper two waste fillers, namely ground tire rubber (GTR) and coffee silverskin (CSS, a waste bio?product from...
Construction of a rough surface in EPDM/CB composite through peroxide curing: A mechanism for optimizing physico?mechanical properties in automotive paint?compatible applications
26/03/2024 -
Showing the distinction between the paint film on a rough surface of EPDM composite with out paint defects and that on a smooth surface with paint defects.This study investigates the profound impact...
A Systematic Investigation of the Kinetic Models Applied to the Transport Behaviors of Aromatic Solvents in Unfilled Hydrogenated Nitrile Rubber/Ethylene Propylene Diene Monomer Composites
25/03/2024 -
Kinetic models of solvent transport behaviors are widely used in rubber–solvent systems, and some key points are still worthy of attention. In this work, the...
Crystallinity and mechanical properties of polypropylene products foamed by microcellular injection molding process
16/03/2024 -
The crosslinking of the PLA/AES blend with dicumyl peroxide in the molten state formed a tough material, suggesting the formation of PLA?g?AES.AbstractAcrylonitrile?EPDM?styrene (AES) was applied as...
Dynamically vulcanized CNC?reinforced thermoplastic elastomer based on PP/EPDM: Morphology and mechanical properties control via interfacial compatibilization
20/03/2024 -
Examining various properties of PP/EPDM TPV enhanced with interfacial compatibilizers and cellulose nanocrystals, while establishing correlations between morphology and these properties.In this...
Tuning the mechanical and thermomechanical properties through the combined effect of crosslinking and annealing in poly(lactic acid)/acrylonitrile?EPDM?styrene blends
16/03/2024 -
Overview of the optimization and modeling process.AbstractAligned with the prevailing sustainability paradigm, the imperative adoption of bio?based substitutes for constituents within...
Nylon 66 short fiber reinforcement in EPDM power transmission belting: A path to enhanced mechanical performance
18/03/2024 -
Schematic flowchart for nylon short fiber reinforced V?belt rubber composite.V?belts are commonly used to transmit power between two distant pulleys. Therefore, a strong reinforcement for dimensional...
Processing–microstructure–fracture toughness relationships in PP/EPDM/SiO2 blend?nanocomposites: Effect of mixing sequence
12/03/2024 -
(A) Effect of various micro?structure development (scheme images) in EWF?fracture behavior (FESEM images) of PP/EPDM/SiO2 ternary blend?nanocomposites, (B) FESEM images taken from the sub?surface...
Silicon Hybrid EPDM Composite with High Thermal Protection Performance
04/03/2024 -
The effects of octaphenylsilsesquioxane (OPS), fumed silica, and silica aerogel on the thermal insulation properties of ethylene propylene diene monomer (EPDM) rubber were studied. On this basis, two...
Design and Study of Novel Composites Based on EPDM Rubber Containing Bismuth (III) Oxide and Graphene Nanoplatelets for Gamma Radiation Shielding
26/02/2024 -
The mechanical, thermal and gamma radiation attenuation properties of ethylene–propylene–diene monomer (EPDM)-based composites containing graphene nanoplatelets (GNs) and...
Influence of vinyl polyhedral oligomeric silsesquioxane with different functionalities and cage structures on the mechanical properties and ablation resistance of EPDM composites
25/02/2024 -
Four kinds of vinyl POSS with EPDM to form different crosslinked network structures.Four vinyl polyhedral oligomeric silsesquioxane (POSS) with different functionalities and cage structures,...
Microwave curing of modified benzoxazine resin/ethylene–propylene–diene monomer rubber/Kevlar composite
20/02/2024 -
Comparison of thermal and microwave curing of the BZ/EPDM/Kevlar thermal composite.The purpose of this paper was to show how modified benzoxazine resin/ethylene–propylene–diene monomer...
Acrylate composite polyurethane binder for steel bridge deck pavements: Process optimization by response surface methodology and microanalysis
23/01/2024 -
The effect of graphite content on the wear mechanism of EPDM?PAE.AbstractHansen solubility parameter theory and rheological laws were employed to investigate the microscopic cross?linked network...
Synthesis of Monodisperse Mesoporous Carbon Spheres/EPDM Rubber Composites and Their Enhancement Mechanical Properties
28/01/2024 -
Monodisperse mesoporous carbon spheres (MCS) were synthesized and their potential applications in ethylene propylene diene monomer (EPDM) foam were evaluated. The obtained MCS exhibited a high...
Synergetic enhancement of the electrical-thermal-mechanical properties of EPDM composites modified by Kaolin and BNNSs
15/01/2024 -
Abstract Offshore wind power is clean energy with rapid growth in recent years. As a key part of wind turbines, improving the combination performance of wind turbine cable...
Preparation and characterization of ethylene?propylene?diene monomer rubber/metal hydroxide composites by electron beam irradiation
12/01/2024 -
EPDM/metal hydroxide composites were prepared by melt blending and electron beam irradiation. The prepared composites exhibited high mechanical, thermal, and flame?retardant...
From Waste to Value Added Products: Manufacturing High Electromagnetic Interference Shielding Composite from End-of-Life Vehicle (ELV) Waste
29/12/2023 -
The use of plastics in automobiles is increasing dramatically due to their advantages of low weight and cost-effectiveness. Various products can be manufactured by recycling end-of-life vehicle (ELV)...
Study on mechanical properties and fire resistance of porous ceramic silicone rubber
27/12/2023 -
Graphical abstract showing EPDM based composites for its application in high voltage transmission line and distribution of micro and nano fillers in the EPDM polymer matrix.AbstractThis work deals...
An Investigation on the Effect of the Surface Modifications and HNTs Loading on the Cure behaviours, Abrasion Resistance, Mechanical and Morphological Properties of NR/EPDM Nanocomposites
28/12/2023 -
Research was conducted to investigate the modification of natural halloysite nanotubes (HNTs) using amino silanes, namely (?-aminopropyl) triethoxysilane (APTES) and diethoxydimethyl silane (DMS)....
