Materiales
Materiales
ISO 3900:2023 - Rubber — Nitrile latex — Determination of bound acrylonitrile content
-
This document specifies a method for the determination of the bound acrylonitrile content of emulsion-polymerized NBR lattices.The method is applicable to NBR lattices having a bound...
ISO 3136:2023 - Rubber latex — Styrene-butadiene — Determination of bound styrene content
-
This document specifies a method for the determination of the bound styrene content of styrene-butadiene rubber (SBR) lattices.The method is applicable to hot (approximately 50 °C)...
D1417 Standard Test Methods for Rubber Laticesâ??Synthetic has been reapproved, available as D1417-16(2021)
18/11/2021 -
Abstract This standard covers the test methods for synthetic rubber lattices ABR, BR, CR, IIR, NBR, NCR, NIR, PBR, PSBR, SBR, SCR, SIR, synthetic rubber lattices with...
ISO 23508:2021 - Solution-polymerized SBR — Evaluation methods of viscoelastic properties
-
This document specifies the standard test formulation, mixing procedure and test methods for evaluation of viscoelastic properties in a compound based on solution-polymerized styrene-butadiene...
ISO 4097:2020 - Rubber, ethylene-propylene-diene (EPDM) — Evaluation procedure
01/08/2020 -
This document specifies:— the physical and chemical tests on raw rubbers;— the standard materials, standard test formulations, equipment, and processing...
ISO 4658:1999/Amd 1:2004 - Acrylonitrile-butadiene rubber (NBR) — Evaluation procedure — Amendment 1
01/10/2004 -
itemtype="https://schema.org/Product" class="section-navigation"> w
ISO 4658:2020 - Acrylonitrile-butadiene rubber (NBR) — Evaluation procedure
01/08/2020 -
This document specifies, for acrylonitrile-butadiene rubbers (NBRs):— physical and chemical tests on raw rubbers;— standard materials, a standard test...
ISO/WD 2322 - Styrene-butadiene rubber (SBR) — Emulsion- and solution-polymerized types — Evaluation procedures
-
itemtype="https://schema.org/Product" class="section-navigation"> u
ISO 22843:2020 - Rubber bands — General requirements and test methods
01/08/2020 -
This document specifies general requirements and relevant test methods for rubber bands made of dry natural rubber used for general purposes such as for daily wrapping or packaging.This...
C1564 Standard Guide for Use of Silicone Sealants for Protective Glazing Systems has been revised to C1564-20
-
Significance and Use 4.1 Guidelines are provided for the use of silicone sealants in protective glazing. Protective glazing incorporates various forms of glazing that are...
C1394 Standard Guide for In-Situ Structural Silicone Glazing Evaluation has been revised to C1394-20
-
Significance and Use 4.1 Guidelines are provided for the procedures to evaluate existing SSG installations, including two- and four-sided installations. Due to the...
ISO 2453:2020 - Rubber, raw styrene-butadiene, emulsion-polymerized — Determination of bound styrene content — Refractive index method
01/05/2020 -
This document specifies a method for determining the bound styrene content of emulsion-polymerized styrene-butadiene rubbers (SBR) by correlation with the measured refractive index of an...
ISO 7725:2020 - Rubber and rubber products — Determination of chlorine and bromine content
01/01/2020 -
This document specifies methods for the determination of chlorine and/or bromine present in raw rubber as well as vulcanized or unvulcanized rubber compounds.The methods are applicable...
D6411/D6411M Standard Specification for Silicone Rubber Room Temperature Vulcanizing Low Outgassing Materials has been reapproved, available as D6411/D6411M-99(2020)
-
Abstract This specification covers a two-part flowable space grade silicone rubber room temperature vulcanizing (RTV) adhesive or compound. This specification provides...
D5902 Standard Test Method for Rubber#x2014;Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value has been reapproved, available as D5902-05(2019)
-
Significance and Use 4.1 Hydrogenated nitrile rubbers are available at different levels of unsaturation and different acrylonitrile content. Highly saturated grades offer...
C1487 Standard Guide for Remedying Structural Silicone Glazing has been revised to C1487-19
-
Significance and Use 4.1 Guidelines are provided for remedying existing SSG installations. Refer to Guide C1401 for a complete discussion of proper SSG design,...
D7465/D7465M Standard Specification for Ethylene Propylene Diene Terpolymer (EPDM) Sheet Used In Geomembrane Applications has been reapproved, available as D7465/D7465M-15(2019)
-
1. Scope 1.1 This specification covers flexible sheet made from ethylene propylene diene terpolymer (EPDM) geomembrane intended for use in geotechnical and...
D5670 Standard Test Method for Rubber#x2014;Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry has been reapproved, available as D5670-95(2019)
-
Significance and Use 4.1 Hydrogenated nitrile rubbers are available at different levels of unsaturation and different acrylonitrile content. Highly saturated grades offer...
ISO 24698-2:2018 - Rubber, raw -- Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR) -- Part 2: Kjeldahl method
-
This document specifies a method for the determination of the bound acrylonitrile content in NBR by an automatic analyser which uses the Kjeldahl method. The method is also applicable to XNBR...
ISO 24698-1:2018 - Rubber, raw -- Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR) -- Part 1: Combustion (Dumas) method
-
This document specifies a method for the determination of the bound acrylonitrile content in NBR by an automatic analyser which uses a combustion process. The method is also applicable to XNBR...
