Otros

 

Otros

Dynamic Mechanical Properties and Constitutive Model of SiC/Al Considering High Strain Rate and High/Low Temperatures
08/07/2025 - 1) Conduct Hopkinson bar tests on SiC/Al composites at both high and low temperatures under high strain rates. 2) Perform a detailed study of SiC/Al flow characteristics using experimental data. 3)...
Quantification of poly(ethylene terephthalate) in environmental samples after methanolysis via gas chromatography–mass spectrometry
- Quantification of the polyester poly(ethylene terephthalate) (PET) in environmental samples is a particular challenge. Due to strong matrix effects by inorganic compounds, thermoanalytical methods...
Adsorption and Enrichment of Ag(I) from Wastewater Using Wheat Bran‐Derived Biosorbent
08/07/2025 - This study develops a novel and reusable wheat‐bran‐derived adsorbent (DMTD‐WB), exhibiting outstanding selectivity and a high removal efficiency of 98.15 % for Ag(I) from a mixed...
Anticorrosive Behavior of a Novel Ternary RGO–ZnO–PANI Nanocomposite‐Reinforced Epoxy Coating on Mild Steel in Marine Environment
03/07/2025 - This study used a novel epoxy/reduced graphene oxide (RGO)–ZnO–polyaniline (PANI) nanocomposite coating to reduce mild steel corrosion in 3.5% NaCl. Potentiodynamic polarization results show that...
Rare‐Earth Ion Intercalation in Graphene via Thermal and Electrostatic Control
06/07/2025 - Europium ions reversibly intercalate into the van der Waals gap of bilayer graphene when heat and electrostatic gate act together, switching the stacking order and electronic response on demand....
Active Biopaste for Coral Reef Restoration
04/07/2025 - Preserving coral reefs is essential. A conductive, hardening paste for coral attachment and mineral accretion technology is developed, using a bio‐based acrylate soybean oil matrix and graphene...
Statistical Distributions of Morphologically Classified Defects in Metal Additive Manufacturing with Implications for Fatigue Life Prediction
01/07/2025 - Morphological features of three defect types in metal additive manufacturing (AM)—lack of fusion, keyhole, and gas‐entrapped pores—are statistically characterized using best‐fit distributions...
Surface‐Engineering Cellulose Nanofibers via In Situ PEDOT Polymerization for Superior Thermoelectric Properties
30/06/2025 - A strategy for homogeneous in situ polymerization of poly(3,4‐ethylenedioxythiophene) along cellulose nanofibril surfaces is presented. Featuring enhanced charge delocalization and exceptional...
Development and clinical application of a novel urinary cortisol extraction agent
- Dichloromethane (DCM), a traditional extractant for 24-h urine free cortisol (UFC) testing, poses significant occupational hazards. This study aimed to explore a novel extractant, evaluate its...
Multifunctional Silicon Surfaces with Enhanced Mechanical Resistance
28/06/2025 - Structuring silicon at micro and nanoscale reduces reflectivity but increases fragility, challenging industrial optical windows. This study develops cost‐effective fabrication processes and...
Green Synthesis of Tin Oxide (SnO2) Nanoparticles Using Ginger Extracts for Photocatalytic Degradation of Organic Dyes in Wastewater
- One of the main issues that has been receiving great attention globally is the pollution of water resources with dyes, as the chemicals present in them are carcinogenic and harmful to aquatic...
Abnormal Gut Microbiota is Associated with Depressive-like Behavior in the Rat Model of Autoimmune Prostatitis
- Many patients with chronic prostatitis (CP)/chronic pelvic pain syndrome (CPPS) also experience depression, although the pathogenesis was unclear. Some studies have shown that gut microbiota...
Paleoshoreline to Anthropocene Coast: assessing coastal stability and vulnerability in response to sea level changes
01/07/2025 - Electrocardiography (ECG) is a non-invasive tool used to identify abnormalities in heart rhythm. It is used to evaluate dysfunctions in the electrical system of the heart. It offers a mechanism...
On the Deformation Behavior of Metastable CrMnNi Steels Processed by Directed Energy Deposition in Different Temperature Regimes
22/06/2025 - In the present study, metastable CrMnNi steels with varying chemical compositions and a concomitantly altered stacking fault energy are processed via directed energy deposition and afterwards tested...
Industrial intelligent connected ecosystem (IICE) oriented towards uncertainty and dynamic demand characteristics
24/06/2025 - Dry hobbing provides a promising solution for industrial gear production with high productivity and superior environmental benefits. However, the presence of chatter vibrations poses a significant...
Enhancing Biohydrogen Yields: A Comparative Study of Individual and Combined Biomass Pretreatment Techniques
- Biohydrogen production from various biomass sources using combined pretreatment methods is an emerging and cost-effective alternative energy technology. To enhance hydrogen production, a batch...
Cerebrospinal Fluid-Derived Genomic Alterations Tracking Glioma
20/06/2025 - Serum lipid levels, which are influenced by both genetic and environmental factors, are key determinants of cardiometabolic health and are influenced by both genetic and environmental factors....
Cylindrical Indentation Method for Predicting Tensile Properties of Additive Manufacturing Aluminum Alloys
15/06/2025 - In this study, a cylindrical indentation method for predicting the tensile properties of additive manufacturing alloys is proposed. The effectiveness of this method is verified by finite element...
The Goldilocks Paradox of Bioelectronics: Misreporting Piezoresistive Gauge Factor Is Obstructing Research Advancements
12/06/2025 - The misreporting of piezoresistive gauge factor for bioelectronic devices impacts the ability of researchers to assess the status of the field. Like Goldilocks, researchers need the ability to take...
Examining the effects of analytical replication on data quality in a non-targeted analysis experiment
- Non-targeted analysis (NTA) methods are integral to environmental monitoring given their ability to expand measurable chemical space beyond that of traditional targeted methods. Such vast...