Otros

Otros

Magnetic?responsive Covalent Adaptable Networks
26/01/2023 - Magnetic covalent adaptable networks are emerging for combining advantages of magnetic?responsiveness and reprocessability, having potential applications in soft robotics, biomedical devices and...
Modelling of corrosion rate in the drinking water distribution network using Design Expert 13 software
28/01/2023 - This study is focused on the modelling of the composite effect of corrosion factors using Design Expert 13 software on the corrosion rate in the water distribution network of Patna (Bihar), India....
Exo-polygalacturonase production enhancement by Piriformospora indica from sugar beet pulp under submerged fermentation using the response surface methodology
28/01/2023 - This study proposed a novel and cost-effective approach to enhance and optimize the exo-polygalacturonase from P. indica, a root endophytic fungus. In the current investigation, the impact of...
High performance, low?fouling nanocomposite membrane with TiO2 nanomaterial in polysulfone matrix for advanced water treatment
26/01/2023 - CNTs?coated TPU/ANF composite fiber prepared by wet spinning process.AbstractFlexible and highly conductive fiber has attracted considerable attention with its massive potential in functional fabric,...
Processability?enhanced aromatic thermotropic liquid crystalline copolyesters via the introduction of the unsymmetrical units
23/01/2023 - AbstractIn this contribution, a numerical calculation environment for the determination of the moisture absorption of polyamide 6 (PA 6) is developed. The focus in this context is on modeling and...
Aerospace, Vol. 10, Pages 121: An Experimental Study on Rotor Aerodynamic Noise Control Based on Active Flap Control
27/01/2023 - Reducing rotor aerodynamic noise is an important challenge in helicopter design. Active flap control (AFC) on rotors is an effective noise reduction method. It changes the segment airfoil shape,...
Aerospace, Vol. 10, Pages 123: Fatigue Analysis of Flexible Joint Elastomers Combining Ogden Second-Order Constitutive Model with Cracking Energy Density
28/01/2023 - As the core component of the flexible nozzle on solid rocket motors, the flexible joint relies on the shear deformation of its silicone rubber elastomers to achieve a large vector angle, and the...
Aerospace, Vol. 10, Pages 125: Fast Inverse Design of Transonic Airfoils by Combining Deep Learning and Efficient Global Optimization
29/01/2023 - In this paper, a deep learning model trained to generate well-posed pressure distributions at transonic speeds is coupled by the efficient global optimization (EGO) algorithm to speed up the inverse...
Chemical Composition, Physicochemical and Bioactive Properties of Avocado (Persea americana) Seed and Its Potential Use in Functional Food Design
28/01/2023 - The appropriate use of avocado seed waste after industrial processing could reduce the problem of overconsumption and food waste in accordance with the “zero waste”...
Fodder Grass Strips: An Affordable Technology for Sustainable Rainfed Agriculture in India
28/01/2023 - Rainfed agriculture, though resource-poor, contributes to around 40 percent of total food production in India. Fodder grass-strip-based systems improve soil’s physical and biological...
Experimental Research on a Needle Roller-Type Electrostatic Separation Device for Separating Unginned Cotton and Residual Films
28/01/2023 - In the mechanized harvesting of cotton in Northwest China, problems result from the presence of a residual film, and it is difficult to remove the residual film in the cotton processing stage. In...
Drying Process Modeling and Quality Assessments Regarding an Innovative Seed Dryer
29/01/2023 - The dehydration of agricultural products is a topic of research covering the preservation and conservation of the quality of agricultural and food items. The actual tasks of environmental protection...
Development of Novel Semi-Stranded Windings for High Speed Electrical Machines Enabled by Additive Manufacturing
28/01/2023 - Recent advances in electrical machines and energy storage technologies make electric vehicles (EVs) feasible replacements to conventional internal combustion engines. One of the main challenges of...
Investigation of Functionality of Vehicle Crumple Zones Recovered after a Traffic Accident
28/01/2023 - It is fairly common for a used vehicle to have a history of damage related to traffic accidents. Post-accident repair of a vehicle is associated with both technical and economic challenges. Safe...
Prediction of Pre- and Post-Breakage Behavior of Laminated Glass Using a Phase-Field Damage Model
29/01/2023 - Laminated glass composed of several layers of glass plies bonded to a polymer interlayer enjoys ever growing interest in modern architecture. Being often used in impact protection designs requires...
A Study of Ornamental Craftsmanship in Doors and Windows of Hui-Style Architecture: The Huizhou Three Carvings (Brick, Stone, and Wood Carvings)
27/01/2023 - The ornamental craftsmanship of the doors and windows of Hui-style architecture demonstrates the centuries-old, intangible culture of Huizhou, of which the Huizhou three carvings (brick, stone, and...
Effects of Climate Change on Rendered Façades: Expected Degradation in a Progressively Warmer and Drier Climate—A Review Based on the Literature
27/01/2023 - Climate change could have a significant impact on buildings if its effects are not properly recognized. The consequences of climate action should be considered at the design and maintenance planning...
In-Plane Behaviour of Unreinforced Masonry Strengthened with a Structural Glass Window: A Proof of Concept
28/01/2023 - Innovative solutions for seismic-retrofitting existing structures are currently required, as often traditional strategies are expensive, non-reversible, highly invasive, and/or fail to address both...
Experimental Application of Robotic Wire-and-Arc Additive Manufacturing Technique for Strengthening the I-Beam Profiles
28/01/2023 - In recent years, the use of Wire-and-Arc Additive Manufacturing (WAAM) for strengthening standardized steel elements received significant interest within the research community. The reason for this...
Verification of the Maximum Stresses in Enhanced Welded Details via High-Frequency Mechanical Impact in Road Bridges
28/01/2023 - High-frequency mechanical impact (HFMI) is an efficient post-weld treatment technique that enhances fatigue strength in metallic welded structures. Steel or steel-concrete composite road bridges,...
Green Walls as Retrofitting Measure: Influence on Energy Performance of Existing Industrial Buildings in Central Italy
29/01/2023 - Industrial buildings in Italy are currently highly energy intensive. Their old age prevents them from complying with current environmental and energy requirements; consequently, redevelopment...