Otros
Otros
Comprehensive Study on Dynamic Modulus and Road Performance of High-Performance Asphalt Mixture
15/11/2024 -
Asphalt pavement durability significantly impacts the service life of roads, and hence, understanding the performance of high-performance asphalt mixtures is crucial. This study investigates the...
Substantive Dimethicone-Based Mucoadhesive Coatings
15/11/2024 -
It is challenging to deliver therapeutics in the oral environment due to the wet surfaces, the nature of the mucosa and the potential for saliva washout. In this study, the development of a...
Analysis of the Optimum Performance for Polymer and Polymer–Nanocomposite-modified Asphalt by Using Multicriteria Decision Analysis
09/11/2024 -
The influence of Acrylate Styrene Acrylonitrile (ASA) and ASA/nanosilica (ASA/Si) additives was investigated by using a dynamic shear rheometer (DSR). Firstly, an ASA polymer was blended with the...
Anti-Aging Performance and Action Mechanism of Asphalt Modified by Composite Modification
07/11/2024 -
In order to evaluate the effect and mechanism of composite modifiers on the anti-aging property of asphalt, this study selected hydrotalcite and ultraviolet absorber as anti-aging modifiers to...
Bead?to?Bead Analysis: Introducing an Innovative Methodology for Accelerated Quantitative Analysis of the Welding Behavior of Bead Foams
02/11/2024 -
ABSTRACTPerformant lightweight components made of bead foams are essential for a sustainable transformation of industry in multiple areas. An in?depth understanding of the welding process is key in...
Chemical and Rheological Evaluation of the Ageing Behaviour of High-Content Crumb Rubber Asphalt Binder
31/10/2024 -
High-Content Crumb Rubber Asphalt (HCRA) binder improves road performance and address waste tyre pollution, yet its ageing behaviour is not fully understood. In this study, 70# neat asphalt binder...
Synergistic effect of polymer?modified rejuvenator and fresh asphalt on road performance of hot in?place recycling styrene–butadiene–styrene?modified asphalt mixtures
24/10/2024 -
The synergistic regeneration effect of polymer?modified rejuvenator (PMRA) and fresh asphalt on hot in?place recycling aged SBS?modified asphalt is discussed, and 6% PMRA and 20% fresh asphalt...
Preparation of a New Single Component Silicone Resin and Its Application in Impregnating Varnish
01/11/2024 -
In this paper, a new single component silicone resin with D-T structural components was prepared through two condensation processes. The design of the silicone resin structure is based on...
Glass fiber waste as a potential bitumen modifier and stabilizing agent in asphalt mixture
20/10/2024 -
The deterioration of Malaysia’s flexible road pavements due to rutting and moisture damage presents a critical problem. Meanwhile, disposing of glass fiber wastes from manufacturing process...
Adjustment of temperature sensitivity using hydrophilic materials to develop superabsorbent polymers based on poly(N?isopropyl acrylamide) as a temperature?sensitive material
16/10/2024 -
Polymeric materials are prominent in the global market due to their cost?effectiveness and versatility, particularly in food packaging. This research investigates the impact of adding silica...
Assessing the Effect of Specimen Preparation Methods on DSR Test Results of Bitumen Using Factorial Design Analysis
19/10/2024 -
A two-level three-factor factorial design experiment was conducted to study the influences of three critical specimen preparation parameters on the measurement results of bitumen by a dynamic shear...
The effect of in?situ fibrillated polytetrafluoroethylene on the rheological, mechanical, and foaming properties of polystyrene based nanocomposite foams
15/10/2024 -
Polystyrene/polytetrafluoroethylene (PS/PTFE) in?situ fibrillated nanocomposites were prepared by melt blending using a HAAKE torque rheometer, and the effects of different contents of in?situ...
Study on Rheological Properties of Waste Cooking Oil and Organic Montmorillonite Composite Recycled Asphalt
02/10/2024 -
Pre-treated waste cooking oil (WCO) and organic montmorillonite (OMMT) were employed for the recycling of aged asphalt, which resulted in the improvement of the design of WCO asphalt rejuvenators and...
Innovative Poly(Lactic Acid) Blends: Exploring the Impact of the Diverse Chemical Architectures from Itaconic Acid
30/09/2024 -
Environment-friendly polymer blends of poly(lactic acid) (PLA) and itaconic acid (IA), poly(itaconic acid) (PIA), poly(itaconic acid)-co-poly(methyl itaconate) (Cop-IA), and net-poly(itaconic...
Composite nanofibres of CuI?polystyrene via electrospinning through critical control of solvation conditions
24/09/2024 -
AbstractDuring the micro?molding of polymer melts, ensuring the viscosity models' accuracy was essential. Existing models had neglected the temperature dependence of microscale factor, rendering them...
Improving the electromechanical deformability of MWCNT/silicone composites via encapsulating MWCNT with polyphenols and multilayered structure regulation
19/09/2024 -
Influence of the viscosity buildup on cell evolution of rigid polyurethane foamsAbstractThe viscoelastic properties development during the reactive foaming of four standard polyurethane formulations...
The influence of phthalonitrile monomer containing oxazine ring on the properties of epoxy/amine system: Curing behavior and thermal stability
16/08/2024 -
Preparation process and performance characterization of cold?mixed epoxy asphalt binderAbstractThe aim of this research was to investigate asphalt effects on the storage stability, mechanical...
Regulating chondrocyte senescence through substrate stiffness modulation
26/07/2024 -
A crystallinity?based rheological model has been developed for polyetheretherketone (PEEK) for use in numerical simulation of industrial polymer processes. The developed numerical model has been...
Design, Fabrication, and Characterization of 3D?Printed Multiphase Scaffolds Based on Triply Periodic Minimal Surfaces
04/01/2024 -
The present work investigates the influence of material phases and their volume fractions on the elastic behavior of triply periodic minimal surface (TPMS) scaffolds for the potential modeling of...
Measurement Techniques and Methods for the Pressure Coefficient of Viscosity of Polymer Melts
18/12/2023 -
Viscosity is a prominent rheological property of polymer, which is affected by temperature, pressure, shear rate, molecular structure, and other factors. Despite the importance of the pressure...
Polyimide nanocomposites for high?temperature capacitive energy storage applications by incorporating functional graphene oxide nanosheets: Design, preparation, and mechanism
15/05/2024 -
Fabrication process of EVD/CNT epoxy vitrimers by dynamic crosslinking.AbstractCarbon nanotubes (CNT) is an ideal candidate for reinforced epoxy vitrimer composites, however, achieving a desirable...
