Otros
Otros
Scalable Growth of Quasi‐1D TiS3 Nanoribbons for High‐Temperature Flexible Strain Sensor
03/02/2026 -
Ethanol‐assisted chemical vapor deposition produces vertically aligned TiS3 nanoribbons (NRs) with controllable aspect ratios, facilitating easy transfer. These TiS3 NRs maintain high conductivity...
Bimetallic (NiFe) and Trimetallic (NiFeCr) Nanoalloys from Metal Oxides Using a Microwave Hydrogen Plasma
17/01/2026 -
Bimetallic (NiFe) and trimetallic (NiFeCr) nanoalloys (NAs) are synthesized using corresponding oxide mixtures using microwave hydrogen plasma within a few milliseconds. The process...
Silk Fibroin With Enhanced Hemostatic Property by the Introduction of Carboxyl Moieties and Preservation of Micrometer Scale Fiber Architecture
31/12/2025 -
ABSTRACTIn the realm of clinical surgery, the unceasing pursuit of hemostatic materials with rapid hemostasis, excellent biocompatibility, degradability, wound‐healing promotion, and economic...
Sustainable All‐Biomass Radiative Coolers with Biomimetic Thorny Fiber for Enhanced Thermoelectric Power Generation
21/10/2025 -
Inspired by Dendrocnide moroides, the biomimetic thorny fibers (BTFs) are designed by adjusting the stacking mode and orientation of nanocellulose for efficient radiative cooling. The...
Magnetically Guided Flexible Bioelectronic Probe for Single‐Cell Recordings in Multi‐Scale Biosystems
21/10/2025 -
In this study, a flexible and magnetically actuated bioelectronic probe called Mag‐N‐Probe is developed for adaptive neural interfacing. It enables remote and real‐time motion control across...
A new elemental analytical approach for microplastic sum parameter analysis—ETV/ICP-MS with CO2
-
Microplastics (MPs) are pervasive environmental pollutants and are considered one of the main challenges of our time. However, a fast and comprehensive analytical approach for MP analysis in...
Direct Recycling of Cold Work Tool Steel Swarf into New Cutting Disks via Field‐Assisted Sintering
03/10/2025 -
Through a sintering method known as field‐assisted sintering technology/spark plasma sintering, cold work tool steel swarf can be directly recycled into new cutting disks. This method is capable of...
Fine and Uniform Ultrathin Film Coating on Fiber via Nonequilibrium Liquid/Liquid Interfacial Engineering
12/09/2025 -
A fiber coated with an unprecedentedly micro‐/nanoscale uniform layer, which is long‐sought‐after yet unachievable by the state‐of‐the‐art coating technologies, is constructed by locking...
2D Molybdenum Disulfide Embedded Photonic Crystal Fiber for all‐Fiber Phase Retarder
21/08/2025 -
A material‐induced birefringence is successfully achieved through selective vapor deposition of monolayer MoS2 in photonic crystal fibers (PCFs). The position‐specific MoS2 films efficiently...
Conformal Electrochemical Nanoimprinting of Silicon: Toward Bio‐Inspired Hierarchical Infrared Meta‐Optics
24/07/2025 -
The conformal Mac‐imprint technology employs stretchable porous polymer stamps coated with a gold catalyst that are pneumatically actuated against curved silicon lenses, electrochemically carving...
Mesoporous Silica Microspheres by Super‐Fast Alkaline Etching of Micrometer‐Sized Stöber Particles
13/05/2025 -
Microscale silica particles are prepared along with a modified, scalable Stöber synthesis using the continuous addition of tetraethoxy silane to an ethanolic solution of ammonia with KCl. Etching...
High‐Performance Polymer Monolayer Transistors with Sub‐20 nm Channel Lengths
06/05/2025 -
By employing the body thickness scaling and channel length scaling strategies, polymer monolayer transistors with a channel length of 18 nm are demonstrated, which exhibit good operational stability...
Bioxolography Using Diphenyliodonium Chloride and N‐Vinylpyrrolidone Enables Rapid High‐Resolution Volumetric 3D Printing of Spatially Encoded Living Matter
26/04/2025 -
Bioxolography, a novel volumetric 3D‐bioprinting technique, enables rapid and high‐resolution fabrication of >1 cm3 engineered living materials. A newly developed three‐component...
Thermally Activated Swelling and Wetting Transition of Frozen Polymer Brushes:a New Concept for Surface Functionalization
14/04/2025 -
A novel approach is introduced that leverages polymer phase transitions to modulate brush behavior. The oleophilic bottle brush system exhibits two distinct melting transitions—bulk and...
Synergistic Effect of Surface Microstructure and Ag3PO4 on Antimicrobial Performance of Polypropylene‐Based Composites
20/03/2025 -
Herein, composites with excellent antibacterial properties are prepared by introducing Ag3PO4 into the polypropylene matrix and regulating surface microstructure. The findings indicate that...
Crack‐Resistant and Self‐Healable Passive Radiative Cooling Silicone Compounds
28/02/2025 -
This study investigates the impact of crack damage on passive radiative cooling and introduces a self‐healing, crack‐resistant radiative cooling silicone/boron nitride compound, developed through...
Waveguide Microactuators Self‐Rolled Around an Optical Fiber Taper
16/02/2025 -
A novel self‐rolling integration strategy mounts ultrathin (≈2 µm) poly(N‐isopropylacrylamide)/Au microactuators onto optical fiber tapers, achieving unprecedented bending angles (>800°) and...
Tailored Nickel Base Multilayer Systems with Adjusted Grain Size and Chemical Composition
07/02/2025 -
Nickel base multilayer systems are fabricated with pulsed electrodeposition and adjusted according to grain size and copper content. The material is characterized with scanning electron microscopy in...
Thermal Transport in Chalcogenide‐Based Phase Change Materials: A Journey from Fundamental Physics to Device Engineering
09/02/2025 -
Phase‐change materials (PCMs) are transforming reconfigurable photonics with their electrically tunable optical properties. This review examines the thermal challenges of scaling PCM devices to...
Efficient Quasi‐Homogenous Photocatalysis Enabled by Molecular Nanophotocatalysts with Donor‐Acceptor Motif
02/12/2024 -
A small molecule‐based quasi‐homogeneous nanophotocatalyst is developed by solution‐processing of donor‐acceptor molecules from micrometer‐sized powder into ≈60 nm uniform nanoparticles...
Spatiotemporal Programmability of 3D Chiral Color Units Driven by Ink Spontaneous Diffusion toward Customized Printing
19/11/2024 -
A spatiotemporally?resolved 3D chiral color modulation method is proposed, utilizing diffusion?driven asymmetric lattice deformation in dual?chiral polymer?templated blue phases. Custom?printed...
