Otros

 

Otros

Cathodic Cage Plasma Deposition of Nanostructured Cu–Fe–Se Coatings on Poly(methyl Methacrylate)
30/04/2026 - Nanostructured Cu–Fe–Se coatings are deposited on PMMA by a modified cathodic cage plasma process, enabling low‐temperature deposition on polymer substrates. A transition from discontinuous to...
In Situ Micromechanical Study of Bimodal γ′–γ″ Precipitate Assemblies in Ni–Cr–Al–Nb Superalloy
27/04/2026 - A Ni–Cr–Al–Nb superalloy with a bimodal γ′–γ″ precipitate distribution is developed. Composite precipitate assemblies form through heterogeneous nucleation, effectively impeding...
Mechanically Programmable Tristate Molecular Switching Through Controlled Fullerene Assembly
28/03/2026 - Mechanically controlled C60 stacking generates fully reversible tristate molecular switching. Discrete monomer–dimer–trimer states yield stable multilevel conductance.ABSTRACTMultistate control...
Impact of Pre‐Oxidation Treatments on a Recycled MgO/Steel‐Composite as Carbon Free Anode in Aluminum‐Electrolysis Environments
19/03/2026 - Cermets (60 vol.% AISI 316L stainless steel, 40 vol.% recycled MgO), intended for use in aluminum electrolysis, were pre‐oxidized in three furnaces with different heating technologies and subjected...
The Influence of Nd3+ Ions on the Optical, Photocatalytic Properties, and Surface Morphology of Thin Mesoporous ZnO Layers
16/02/2026 - This manuscript presents the synthesis of thin mesoporous ZnO films doped with neodymium ions via sol–gel and spin‐coating methods. It analyzes the resulting morphological, optical, and...
Optimization of Ultrasound-Assisted Deep Eutectic Solvents Extraction, Characterization, and Hypoglycemic Activity of Polysaccharides from Abri Herba
- The ultrasonic-assisted deep eutectic solvents (DES) method was used to extract the polysaccharides from Abri Herba(AHPs), and the extraction process was optimized by Box-Behnken response surface....
Enhanced Triboelectric Nanogenerator Performance Using Torrefied Biowaste Dielectrics
11/01/2026 - Torrefied pine sawdust, chicken manure, and rose pulp are embedded in silicone to form high‐performance triboelectric nanogenerators for sustainable mechanical energy harvesting. Systematic...
Dual-mode sensing strategy for assaying phosphate ions using Fe, N-co-doped carbon dots with peroxidase mimetic activity
- Monitoring phosphate (PF) levels is critically significant because of its environmental, biomedical, and agricultural importance. In the current study, a novel dual-mode sensing platform was...
Atomic Force Microscope, Nanoindentation, and Tribological Performances of Arc Ion‐Plated AlTiSiN and AlCrSiN Coatings under Dry‐Friction Condition
13/10/2025 - AlTiSiN and AlCrSiN coatings are deposited on Ti6Al4V alloy using arc ion plating, and their morphologies, elemental distributions, surface topographies, nanohardness, and tribological behaviors are...
3D‐Printable Near‐Infrared‐Responsive Microscale Cantilever made of the Composite Consisting of Ceramic Particles and Graphene Flakes
26/09/2025 - A near infrared‐responsive microscale cantilever is developed using a 3D‐printable composite based on photocurable resin consisting of sepiolite and graphene flakes. The material absorbs...
Light‐Activated Micromotors in Air Propelled by Thermal Convection
18/09/2025 - Near‐infrared‐driven micromotors in air can overcome gravity and generate convective motion by a light‐induced thermal mechanism driven by a temperature gradient in the air caused by the...
Werkstoffwahl im Wandel - Batteriegehäuse aus Stahl
29/08/2025 - The study reports the properties of slag–flyash–microsilica ternary blended one-part alkali-activated binder system. Microsilica, characterised by high surface area, helps in reducing porosity...
The emerging role of Imatinib in malaria management: a review of evidence and future directions
15/08/2025 - Purpose of Review This review provides a critical analysis of current and emerging methods for identifying and quantifying microplastic fibres (MPF) in wastewater, covering all...
Formulation and Characterization of Cerium Ion Cross‐Linked Alginate/PVA Films for Wound Dressing Applications
13/08/2025 - Development and physical characterization of Alginate/PVA‐Ce films.ABSTRACTHerein, alginate films doped with cerium(III) carbonate were prepared via the casting method. An acid treatment process...
Bringing Attomolar Detection to the Point‐of‐Care with Nanopatterned DNA Origami Nanoantennas
26/07/2025 - Single DNA molecules are captured within the hotspots of DNA origami NanoAntennas arranged on a chip surface. Fluorescence is amplified, enabling direct detection on a point‐of‐care‐compatible...
Surface‐Engineering Cellulose Nanofibers via In Situ PEDOT Polymerization for Superior Thermoelectric Properties
30/06/2025 - A strategy for homogeneous in situ polymerization of poly(3,4‐ethylenedioxythiophene) along cellulose nanofibril surfaces is presented. Featuring enhanced charge delocalization and exceptional...
Thermionics in Topological Materials
16/06/2025 - Thermionics is one of the fundamental energy conversion mechanisms in solid state systems. Recent development in topological materials opens new avenues in developing thermionic systems and devices....
Microstructure and Mechanical Property Variation of Al6061/GNP Nanocomposite by Mg and Ultrasonic Vibration in Bottom Pouring Stir Casting
15/06/2025 - This research article investigates the fabrication of Al6061/graphene nanoplatelet (GNP) nanocomposite utilizing the ultrasonic‐assisted stir casting (USASC) technique. The influence of magnesium...
Characterizing Heat Transfer Performance in a Slurry Bubble Column Reactor Equipped with a Real Heat Exchanger
19/06/2025 - Abstract Activated carbon was prepared from walnut shells (WS-AC) to study the adsorption mechanism of Congo red (CR) dye in an aqueous solution. The adsorbent was characterized using...
Real‐Time Characterization of Polypropylene Jet Dynamics in Melt Electrospinning Using Laser Diffraction and Image Analysis
03/06/2025 - This study uses real‐time laser diffraction image analysis to quantify fiber diameter changes and whipping behavior from the nozzle to the collector under varying electric field conditions. By...
Optimal Conditions Linked to the Reducing Agent on the Role of Morphology of Silver Nanoparticles
05/05/2025 - Thus, the relevance of the present work is the prediction and control of the nanometric particle size range, which is necessary for an efficient silver nanoparticle application in different...