Otros
Otros
Taguchi optimized sliding wear behavior and hardness of novel Grewia optiva/Basalt fiber reinforced hybrid polyester composites
06/06/2023 -
AbstractIn this study, a novel multiscale synergistic reinforced polyester fiber (PET) was prepared by a bionic coating and electrostatic synergism. The three?dimensional (3D) interconnected...
Multiscale Evaluation of Jaw Geometry Reproduction Obtained Via the Use of Selected Orthodontic Materials in Dental Implants and Orthodontics—In Vitro Case Study
08/06/2023 -
In this paper, the multiscale analysis of the reproduction accuracy of jaw geometry obtained via the use of selected orthodontic materials is discussed. Impressions were made from two types of...
Compounding, Rheology and Numerical Simulation of Highly Filled Graphite Compounds for Potential Fuel Cell Applications
06/06/2023 -
Highly filled plastics may offer a suitable solution within the production process for bipolar plates. However, the compounding of conductive additives and the homogeneous mixing of the plastic melt,...
Effect of Antibacterial Agents on Dentin Bond Strength of Bioactive Restorative Materials
08/06/2023 -
Treating dentin surfaces with antibacterial agents prior to bonding bioactive restorations might affect their mechanical properties. In this study, we evaluated the effect of silver diamine fluoride...
Mechanical and thermal properties of recycled polyethylene/surface treated hemp fiber bio?composites
07/06/2023 -
This study presents the production of economic, mechanically, and thermally stable polymer composites via their sustainable and reusable components with an environmentally friendly approach.Hemp is a...
Membrane material based on acrylic emulsion and terry cloth for medical drapes
07/06/2023 -
The structure and principle of operation of the membrane material.Waterproof “breathable” membrane materials were obtained using acrylic emulsion for the polymer layer and cotton terry cloth for...
Using selective electron beam melting to enhance the high?temperature strength and creep resistance of NiAl?28Cr?6Mo in?situ composites
03/06/2023 -
By increasing the density of interfaces in NiAl?CrMo in?situ composites, the mechanical properties can be significantly improved compared to conventionally cast material. The refined microstructure...
Investigating the miscibility of poly (butylene adipate-co-terephthalate)/poly (lactic acid) mixtures through multi-scale simulation and experiments
02/06/2023 -
The processability and practical applications of poly (butylene adipate-co-terephthalate) (PBAT) /poly (lactic acid) (PLA) blends are limited due to their lower miscibility. To investigate the...
Study on Dispersion, Adsorption, and Hydration Effects of Polycarboxylate Superplasticizers with Different Side Chain Structures in Reference Cement and Belite Cement
02/06/2023 -
To investigate the effects of Reference cement (RC) and Belite cement (LC) systems, different molecular structures of polycarboxylate ether (PCE) were prepared through the free radical polymerization...
Effect of α-Al2O3 Additive on the Surface Micro-Arc Oxidation Coating of Ti6Al4V Alloy
05/06/2023 -
α-Al2O3 nanoparticles can enter a micro-arc oxidation coating and participate in the coating-formation process through chemical reaction or physical–mechanical combination...
Flame-Retardance Functionalization of Jute and Jute-Cotton Fabrics
02/06/2023 -
Jute is a ligno-cellulosic natural fiber that ranks second in terms of the volume of cellulosic fibers and is extensively utilized for technical textile applications. The goal of this study is to...
Effect of Functionalized Polyethylene Wax on the Melt Processing and Properties of Highly Filled Magnesium Hydroxide/Linear Low-Density Polyethylene Composites
04/06/2023 -
The poor processing and rheological properties of highly filled composites caused by the high loading of fillers can be improved with the use of maleic anhydride grafted polyethylene wax (PEWM) as...
Frequency and deflection responses of 3D?printed carbon fiber reinforced polylactic acid composites: Theoretical and experimental verification
01/06/2023 -
Frequency and deflection responses of 3D?printed carbon fiber reinforced polylactic acid compositesIn the present study, the vibration and bending characteristics of carbon fiber reinforced 3D...
Structure evolution and properties enhancement of polyamide?6/polyamide?1010 films under uniaxial and biaxial stretching
31/05/2023 -
The preparation scheme of cotton fabric.AbstractThe increase in the number of infectious diseases has exerted many negative consequences on human health. In this study, the antibacterial cotton...
Synergistic modification of short?chain fluoro?alcohol and siloxane end?capping agents endowing an enhanced superhydrophobic waterborne polyurethane coating
31/05/2023 -
AbstractA novel modified polysaccharide composite preformed particle gel (MCPG) was synthesized as a profile control agent to improve the situation of high water cut and low oil recovery. Then, the...
One?pot preparation of tough, anti?swelling, antibacterial and conductive multiple?crosslinked hydrogels assisted by phytic acid and ferric trichloride
29/05/2023 -
AbstractThis paper investigates thermo?mechanical, chemical, and morphological characteristics of alkali pretreated and enzyme treated Areca catechu tree peduncle fibers (ACTPFs) for probable...
Delivery of soluble ethinylestradiol complex by pH?responsive core?shell composite hydrogel capsules
29/05/2023 -
AbstractA systematic study of the post?cure cycle of soy?based polyurethane thermosets was conducted as a function of crosslinker content, post?cure temperature and time. An improvement of 207% of...
Verification of the Simulated Carburizing Process in Different Bore Sizes
31/05/2023 -
Carburizing is one of the leading surface treatments in the industry. For this study, 20MnCr5 steel was gas carburized and quenched in real circumstances and simulated with Simufact software. The...
Dispersion and Demineralization Inhibition Capacity of Novel Magnesium Oxide Nanoparticles Varnish on Enamel Surfaces against Streptococcus mutans (an In Vitro Study)
30/05/2023 -
This research analyzed the dispersion and impact of magnesium oxide nanoparticles (MgONPs) varnish on inhibiting enamel demineralization. A novel MgONPs varnish was prepared in absolute ethanol with...
Construction of the Heterostructure of NiPt Truncated Octahedral Nanoparticle/MoS2 and Its Interfacial Structure Evolution
31/05/2023 -
Interfacial atomic configuration plays a vital role in the structural stability and functionality of nanocomposites composed of metal nanoparticles (NPs) and two−dimensional...
Enhanced Photoluminescence and Random Lasing Emission in TiO2-Decorated FAPbBr3 Thin Films
30/05/2023 -
Herein, titanium-dioxide-decorated organic formamidinium lead bromide perovskite thin films grown by the one-step spin-coating method are studied. TiO2 nanoparticles are widespread in FAPbBr3 thin...
