Materiales
Materiales
ISO 15527:2022 - Plastics — Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) — Requirements and test methods
-
This document specifies the requirements and test methods for solid flat compression-moulded sheets of polyethylene (PE-UHMW and PE-HD, see ISO 1043-1) without fillers or reinforcing...
F648 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants has been revised to F648-21
-
Abstract This specification covers ultra-high-molecular-weight polyethylene (UHMWPE) powder and fabricated forms for use in surgical implants. UHMWPE powder shall be of...
ISO 21304-2:2021 - Plastics — Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
01/01/2021 -
This document specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of PE-UHMW moulding and extrusion materials. It gives the...
F2759 Standard Guide for Assessment of the Ultra-High Molecular Weight Polyethylene (UHMWPE) Used in Orthopedic and Spinal Devices has been revised to F2759-19
-
Significance and Use 4.1 This guide aims to provide guidance for a range of assessments and evaluations to aid in preclinical research and device development of various...
ISO 21304-1:2019 - Plastics -- Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
-
This document establishes a system of designation for thermoplastic PE-UHMW materials, which can be used as the basis for specifications.For the purposes of this document, PE-UHMW...
ISO 5834-3:2019 - Implants for surgery -- Ultra-high-molecular-weight polyethylene -- Part 3: Accelerated ageing methods
-
This document specifies a test method for investigating the oxidative stability of ultra-high-molecular-weight polyethylene (UHMWPE) materials as a function of processing and sterilization...
ISO 5834-5:2019 - Implants for surgery -- Ultra-high-molecular-weight polyethylene -- Part 5: Morphology assessment method
-
This document specifies the test method for assessing the morphology of UHMWPE moulded forms, which are described in ISO 5834‑2.It is not applicable to UHMWPE powder forms, which...
ISO 5834-1:2019 - Implants for surgery -- Ultra-high-molecular-weight polyethylene -- Part 1: Powder form
-
This document specifies the requirements and corresponding test methods for moulding materials in powder form made from ultra-high-molecular-weight polyethylene (UHMWPE) for use in the...
ISO 5834-4:2019 - Implants for surgery -- Ultra-high-molecular-weight polyethylene -- Part 4: Oxidation index measurement method
-
This document specifies a method for the measurement of the relative extent of oxidation present in ultra-high molecular weight polyethylene (UHMWPE).It is applicable to ultra-high...
ISO 15527:2018 - Plastics -- Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) -- Requirements and test methods
-
This document specifies the requirements and test methods for solid flat compression-moulded sheets of polyethylene (PE-UHMW and PE-HD, see ISO 1043-1) without fillers or reinforcing materials....
F2214 Standard Test Method for In Situ Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE) has been revised to F2214-16
-
Significance and Use 5.1 This test method is designed to produce data indicative of the degree of crosslinking in ultra high molecular weight polyethylene that has been...
F2625 Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry has been reapproved, available as F2625-10(2016)
-
Significance and Use 5.1 The crystallinity of UHMWPE will influence its mechanical properties, such as creep and stiffness. The reported crystallinity will depend on the...
F2003 Standard Practice for Accelerated Aging of Ultra-High Molecular Weight Polyethylene after Gamma Irradiation in Air has been reapproved, available as F2003-02(2015)
-
Significance and Use 4.1 This practice summarizes a method that may be used to accelerate the oxidation of UHMWPE components using elevated temperature and elevated oxygen...
F648 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants has been revised to F648-14
-
Abstract This specification covers ultra-high-molecular-weight polyethylene (UHMWPE) powder and fabricated forms for use in surgical implants. UHMWPE powder shall be of...
