Materiales
Materiales
Research on Nano-Titanium Modified Phenolic Resin Coating and Corrosion Resistance
28/09/2023 -
Nano-titanium can be used in the field of anticorrosive coatings due to its excellent corrosion resistance. In this paper, phenolic resin was modified by nano-titanium using a physicochemical method....
Mechanical properties and oxidative ablation behaviors of polysilazane?modified phenolic resin aerogel/carbon fiber fabric composites
25/09/2023 -
The PSZ?PR/CF composites exhibited good mechanical properties and retained a good network structure after ablation test.Nanoporous composites have been extensively applied in aerospace applications...
Preparation of nano SiC by carbothermic reduction of silicon cutting waste with phenolic resin
16/09/2023 -
With the vigorous development of photovoltaic industry, considerable amount of silicon cutting waste (SCW) has been generated and aroused a series of environmental problems. Current recycling methods...
A novel epoxy adhesive with ground rubber tire powder and carboxylated multiwalled carbon nanotubes
29/08/2023 -
High?performance epoxy adhesive with Ground Rubber Tire Powder and Carboxylated Multi?Walled Carbon Nanotubes.The present study was an attempt to improve the toughness, mechanical and adhesion...
Research Progress in Boron-Modified Phenolic Resin and Its Composites
25/08/2023 -
As one of the most successful modified phenolic resins, boron-modified phenolic resin (BPF) has excellent heat resistance and ablative resistance, good mechanical and wear resistance, and flame...
High dye separation performance of novel Cu?BTC/PES MMMs with water?stabilized Cu?BTC nanoparticles
12/08/2023 -
For the composite after ablation, the introduction of MP has a most significant enhancement in performance.AbstractPhenolic resin (PR)?based composites are the main materials used in thermal...
The coating based on phenolic resin gives rigid polyurethane foam excellent flame retardant properties
10/08/2023 -
A flame retardant coating was designed and synthesized using phenolic resin (PF), 9,10?dihydro?9?oxa?10?phosphazephenanthrene?10?oxide (DOPO), and nano?SiO2 as raw materials. The coating is applied...
MWCNT-Coated Glass Fabric/Phenol Composite Heating Panel Fabricated by Resin Infusion Process
10/08/2023 -
MWCNTs (multiwalled carbon nanotubes) were applied to fiber-reinforced composite materials with phenolic resin having flame retardance for the composite heating panels of railroad vehicles. Instead...
Constructing a composite microfiltration carbon membrane by TiO2 and Fe2O3 for efficient separation of oil–water emulsions
22/07/2023 -
Membrane-based separation technology has attracted enormous attention for oil/water emulsion treatment. Here, composite microfiltration carbon membranes (MCMs) were prepared from the precursor of...
Versatile Synthesis of Hollow?structured Mesoporous Carbons by Enhanced Surface Interaction for High?performance Lithium?ion Batteries
07/07/2023 -
Nanoporous carbons are very attractive for various applications including energy storage. Templating methods with assembled amphiphilic molecules or porous inorganic templates are typically used for...
The phase evolution of resin?bonded Al2O3?Al refractory containing magnesia under N2?blowing
07/07/2023 -
Phenolic resin?bonded Al2O3?Al?MgO refractories were prepared from sintered alumina and aluminum as raw materials, adding 3 wt%, 9 wt% and 15 wt% high?purity magnesia. The green samples were treated...
Synthesis and Characterization of an Environmentally Friendly Phenol–Formaldehyde Resin Modified with Waste Plant Protein
07/07/2023 -
To develop a lower-cost, excellent-performance, and environmentally friendly phenol–formaldehyde (PF) resin, soybean meal was used to modify PF resin, and soybean...
Additive manufacturing of continuous carbon fiber–reinforced silicon carbide ceramic composites
02/07/2023 -
A material extrusion (MEX) technology has been developed for the additive manufacturing of continuous carbon fiber–reinforced silicon carbide ceramic (Cf/SiC) composites. By comparing and analyzing...
Structural Evolution in Glassy Carbon Investigated Based on the Temperature Dependence of Young’s Modulus
03/07/2023 -
As a non-graphitized carbon material, possessing exceptional hardness and chemical inertness, glassy carbon (GC) is often synthesized through the pyrolysis method, which includes a compression...
Comparative analysis of hydrothermal properties of ramie fiber?reinforced phenolic resin and ramie fiber?reinforced unsaturated polyester composites
21/06/2023 -
Effect of water absorption on structure of RFRPRamie fiber?reinforced polymer (RFRP) composites are widely used in various fields owing to their environmental friendliness and cost efficiency. To...
Effects of expanded graphite content on the performance of MgO?C refractories
13/06/2023 -
Expanded graphite was introduced into a MgO?C refractory to suppress its thermal expansion and thus enhance thermal shock resistance. The refractory was prepared by mixing MgO powders (particle size...
Synthesis and characterization of a novel aldehyde teroctyl phenolic resin vulcanizing agent for isoprene rubber processing
03/06/2023 -
Abstract The commonly used phenolic resin vulcanizing agents for rubber processing technology have some limitations. In this study, a new aldehyde teroctyl phenolic resin...
Manufacture and Vibration-Damping Effect of Composites for Archery Carbon Fiber-Reinforced Polymer Limb with Glass Fiber-Reinforced Polymer Stabilizer
29/05/2023 -
Typically, archers prepare two sets of bows for competitions in case of bow breakage, but if the limbs of the bow break during a match, archers can become psychologically disadvantaged, leading to...
Effect of blending cashew oil modified phenolic resin and nitrile rubber on thermal, mechanical, and tribological performance of friction materials
16/05/2023 -
This study aims to investigate the effects of blending cashew nutshell oil modified phenolic resin and nitrile rubber (NBR) on the thermal, mechanical, and tribological performance of brake friction...
Progress in design and processing of polyhydroxyalkanoates (PHAs): Home compostable poly(3?hydroxybutyrate?co—3?hydroxyhexanoate) (PHBHHx)/polybutylene succinate?co?adipate (PBSA) blend
19/04/2023 -
Reaction mechanism between formaldehyde trapping agent and formaldehyde.AbstractIn order to solve the problem of formaldehyde release from the traditional phenolic foam (PF) in the process of coal...
Paper-Based Laminates Impregnated with a Hybrid Lignin-Phenol-Formaldehyde Resin
27/03/2023 -
In this study, high-pressure laminates (HPL) impregnated with phenol-formaldehyde (PF) resins enriched with kraft lignin were developed. Pulverised kraft lignin was added to the commercial PF resin...