Materiales
Materiales
ISO 3136:2023 - Rubber latex — Styrene-butadiene — Determination of bound styrene content
-
This document specifies a method for the determination of the bound styrene content of styrene-butadiene rubber (SBR) lattices.The method is applicable to hot (approximately 50 °C)...
D1417 Standard Test Methods for Rubber Laticesâ??Synthetic has been reapproved, available as D1417-16(2021)
18/11/2021 -
Abstract This standard covers the test methods for synthetic rubber lattices ABR, BR, CR, IIR, NBR, NCR, NIR, PBR, PSBR, SBR, SCR, SIR, synthetic rubber lattices with...
ISO 23508:2021 - Solution-polymerized SBR — Evaluation methods of viscoelastic properties
-
This document specifies the standard test formulation, mixing procedure and test methods for evaluation of viscoelastic properties in a compound based on solution-polymerized styrene-butadiene...
ISO/WD 2322 - Styrene-butadiene rubber (SBR) — Emulsion- and solution-polymerized types — Evaluation procedures
-
itemtype="https://schema.org/Product" class="section-navigation"> u
ISO 2453:2020 - Rubber, raw styrene-butadiene, emulsion-polymerized — Determination of bound styrene content — Refractive index method
01/05/2020 -
This document specifies a method for determining the bound styrene content of emulsion-polymerized styrene-butadiene rubbers (SBR) by correlation with the measured refractive index of an...
D3346 Standard Test Methods for Rubber Property#x2014;Processability of Emulsion SBR (Styrene-Butadiene Rubber) With the Mooney Viscometer (Delta Mooney) has been revised to D3346-17
-
Significance and Use 5.1 These empirical tests have been found to be suitable for ranking a series of unpigmented emulsion SBR in order of processability. They may also be...
D3314 Standard Test Method for Rubber#x2014;Chemical Analysis for Polystyrene Blocks In SBR (Styrene-Butadiene Rubber) and Styrene-Reinforced Latices has been reapproved, available as D3314-02(2017)
-
Significance and Use 4.1 This test method is suitable for manufacturing control, development, and research studies. 1....
D5605 Standard Practice for Styrene-Butadiene Rubber (SBR)#x2014;Establishing Raw Mooney Viscosity Target Values has been reapproved, available as D5605-94(2016)
-
Significance and Use 3.1 Mooney viscosity is used extensively in the rubber industry as a measurement of the general quality of raw or compounded uncured rubber. This...
D3185 Standard Test Methods for Rubber#x2014;Evaluation of SBR (Styrene-Butadiene Rubber) Including Mixtures With Oil has been reapproved, available as D3185-06(2016)
-
Significance and Use 4.1 These test methods are mainly intended for referee purposes but may be used for quality control of synthetic rubber production. They may also be...
D3186 Standard Test Methods for Rubber#x2014;Evaluation of SBR (Styrene-Butadiene Rubber) Mixed With Carbon Black or Carbon Black and Oil has been reapproved, available as D3186-07(2016)
-
Significance and Use 3.1 These test methods are intended mainly for referee purposes but may be used for quality control of masterbatch production. They may also be used...
ISO 21561-2:2016 - Styrene-butadiene rubber (SBR) -- Determination of the microstructure of solution-polymerized SBR -- Part 2: FTIR with ATR method
08/03/2016 -
Abstract ISO 21561-2:2016 specifies procedures for the quantitative determination of the microstructure of the butadiene and the content of styrene in solution-polymerized SBR (S-SBR) by...
ISO 289-3:2015 - Rubber, unvulcanized -- Determinations using a shearing-disc viscometer -- Part 3: Determination of the Delta Mooney value for non-pigmented, oil-extended emulsion-polymerized SBR
09/10/2015 -
Abstract ISO 289-3:2015 specifies a method for determining the Delta Mooney value of non-pigmented, oil-extended emulsion-polymerized styrene-butadiene rubber.
ISO 20299-1:2015 - Film for wrapping rubber bales -- Part 1: Butadiene rubber (BR) and styrene-butadiene rubber (SBR)
17/09/2015 -
Abstract ISO 20299-1:2015 specifies the material and physical property requirements for non-strippable film for wrapping general-purpose synthetic rubber bales, intended to keep the bales...
ISO 21561-1:2015 - Styrene-butadiene rubber (SBR) -- Determination of the microstructure of solution-polymerized SBR -- Part 1: 1H-NMR and IR with cast-film method
17/07/2015 -
Abstract ISO 21561-1:2015 specifies procedures for the quantitative determination of the microstructure of the butadiene and the content of styrene in solution-polymerized SBR (S-SBR) by 1H-NMR...
