Construcción
Construcción
Removal?Free and Multicellular Suspension Bath?Based 3D Bioprinting
12/10/2024 -
This work presents a storable and biocompatible starch hydrogel with a simple preparation procedure and a stable microgranule to scale up a range of hydrogels for removal?free and multicellular...
Aerospace, Vol. 11, Pages 836: Evolution of Rotating Internal Channel for Heat Transfer Enhancement in a Gas Turbine Blade
11/10/2024 -
To achieve higher thermal efficiency in a gas turbine, increasing the turbine inlet temperature is necessary. The rotor blade at the first stage tolerates the highest temperature, and the serpentine...
Numerical Analysis of the Dynamic Response of a High-Speed Railway Foundation across a Ground Fissure Zone—A Case Study of the Datong–Xi’an High-Speed Railway Crossing a Ground Fissure in the Taiyuan Basin, China
13/10/2024 -
The interaction between train vibration load and ground fissure disasters affects the safe operation of trains. However, the interaction between the high-speed railway foundation and the train...
Sustainability Assessments of Living Walls in the Mediterranean Area
11/10/2024 -
The evaluation of the environmental impacts of a living wall (LW) system cannot leave out the effects on the buildings’ sustainability during its life cycle. Consequently, to consider...
Influence of Thermal Environment on College Students’ Learning Performance in Hot Overhead Spaces in China
11/10/2024 -
With the popularization of informal learning styles in universities, building overheads in hot and humid regions of China has become one of the main spaces for informal learning among college...
Numerical Study on Seismic Performance of a New Prefabricated Reinforced Concrete Structural System Integrated with Recoverable Energy-Dissipating RC Walls
13/10/2024 -
To enhance the performance of infill walls and reduce seismic damage, this paper proposes a novel prefabricated reinforced concrete (PRC) energy-dissipating wall, forming a new recoverable...
Experimental Analysis of the Mechanical Behavior of Shear Connectors for Precast Sandwich Wall Panels When Subjected to the Push-Out Tests
14/10/2024 -
Precast concrete sandwich panels consist of two outer layers connected by a central connector and an inner insulating layer that enhances thermal and acoustic performance. A key challenge with these...
Numerical Investigation of Film Formation Characteristics and Mechanisms through Airless Spraying on Spherical Surfaces
11/10/2024 -
This paper focuses on key engineering issues, particularly the overall turbulent transport of paint spray and coating film distribution characteristics, in the process of airless spraying film...
A Review on the Effect of Wood Surface Modification on Paint Film Adhesion Properties
14/10/2024 -
Wood surface treatment aims to improve or reduce the surface activity of wood by physical treatment, chemical treatment, biological activation treatment or other methods to achieve the purpose of...
Axial Impact Response of Carbon Fiber-Reinforced Polymer Structures in High-Speed Trains Based on Filament Winding Process
11/10/2024 -
The continuous increase in the operating speed of rail vehicles demands higher requirements for passive safety protection and lightweight design. This paper focuses on an energy-absorbing component...
Carbon Sequestration by Preparing Recycled Cement, Recycled Aggregates, and Recycled Concrete from Construction and Demolition (C&D) Wastes
14/10/2024 -
As the world’s largest producer of construction waste, China’s recycling and related policies are of the biggest concern to the world. However, the effective disposal and...
Source, Extraction, Properties, and Multifunctional Applications of Pectin: A Short Review
12/10/2024 -
Pectin, a heteropolysaccharide derived from plant cell walls, is essential in the food, pharmaceutical, and environmental industries. Currently, citrus and apple peels are the primary sources for...
Life Cycle Assessment of Resource-Oriented Sanitation Based on Vacuum Toilet and Vacuum Kitchen Waste Shredder: A Case Study in Rural Southeastern China
12/10/2024 -
The resource value of feces and kitchen waste has not been fully emphasized and utilized in rural sanitation management in China. In this paper, we propose a new ecological sanitation model with the...
Assessing the Impact of Façade Typologies on Life Cycle Embodied Carbon in University Building Retrofits: A Case Study of South Korea
14/10/2024 -
This study examines the influence of façade typologies on Life Cycle Embodied Carbon (LCEC) in retrofitting university buildings in South Korea. By analyzing 28 cases across seven...
Viability of the Microalgae Thalassiosira Weissflogii and Prorocentrum Cordatum to Titanium Nanoparticles
-
According to the results of the experimental study, it was found that the addition of titanium dioxide nanoparticles does not lead to changes in morphological, structural, functional and fluorescent...
An Interactive Fluid–Solid Approach for Numerical Modeling of Composite Metal Foam Behavior under Compression
08/10/2024 -
The performance of composite metal foam (CMF) under compression is studied numerically using fluid?solid interaction of entrapped air inside hollow spheres with surrounding sphere walls and metallic...
Triptycene based microporous hypercrosslinked polymer with amino functionality for selective CO2 capture
09/10/2024 -
Schematic illustration of reflective and heat insulation coatings for passive cooling.AbstractReflective and heat insulation coatings are new types of materials coated on constructions. However,...
A biodegradable bi?layer nano fibrous membrane fabricated by centrifugal spinning for active food packaging
08/10/2024 -
Application of DPG/KH550 modified pyrolysis carbon black in oil and high temperature?resistant NBR composites.AbstractIn this paper, pyrolysis carbon black (CBp) was introduced into nitrile butadiene...
Risk Assessment of Overturning of Freestanding Non-Structural Building Contents in Buckling-Restrained Braced Frames
08/10/2024 -
The increasing demand in structural engineering now extends beyond collapse prevention to encompass business continuity planning (BCP). In response, energy dissipation devices have garnered...
In-Plane Mechanical Properties Test of Prefabricated Composite Wall with Light Steel and Tailings Microcrystalline Foamed Plate
08/10/2024 -
The tailings microcrystalline foamed plate (TMF plate), produced from industrial waste tailings, has limited research regarding its use in high-performance building walls. Its brittleness under...
Evaluating the Seismic Resilience of Above-Ground Liquid Storage Tanks
09/10/2024 -
Historical seismic events have repeatedly highlighted the susceptibility of above-ground liquid storage steel tanks, underscoring the critical need for their proper design to minimize potential...
