Construcción
Construcción
Influence of citric acid and EFKA as dispersants on the properties of alumina monoliths produced by tert-butyl alcohol-based freeze-casting
16/04/2024 -
Abstract In this paper, EFKA FA 4663 (EFKA) dispersant was used for the first time in the alumina slurries tert-butyl alcohol-based freeze-casting and compared to the...
Design and Simulation for Technological Integration of Bio-Based Components in Façade System Modules
16/04/2024 -
Driven by environmental sustainability concerns, the integration of bio-based components in curtain wall systems is gaining traction in both research and the construction market. This paper explores...
Adhesion Stability According to Adhesion Area of Traditional Tile Gluing Method
16/04/2024 -
In this study, verification was conducted through experiments to identify problems caused by traditional attachment methods in order to highlight the need for a suitable attachment method for new...
Evaluation of Aggregate Distribution Heterogeneity in 3D Printed Concrete by Means of X-ray CT
17/04/2024 -
The mechanical performance of a printed object in 3D concrete printing is influenced by the interfacial bonding strength between the deposited filaments. Hence, the physical properties of the layer...
Measurements and Evaluation of Road Traffic-Induced Micro-Vibration in a Workshop Equipped with Precision Instruments
18/04/2024 -
Road traffic transportation has flourished in the process of urbanization due to its advantages, but concurrently it generates harmful environmental vibrations. This vibration issue becomes...
The Impact of Ground-Floor Elevation of School Buildings on Courtyard Wind Environment
18/04/2024 -
Poor wind conditions in metropolitan areas can result in inadequate ventilation and degradation of the thermal environment. Several researches have demonstrated that the building ground floor...
Improving the Adhesion of Multi-Walled Carbon Nanotubes to Titanium by Irradiating the Interface with He+ Ions: Atomic Force Microscopy and X-ray Photoelectron Spectroscopy Study
17/04/2024 -
A complex study of the adhesion of multi-walled carbon nanotubes to a titanium surface, depending on the modes of irradiation with He+ ions of the “MWCNT/Ti” system, was...
Change in the Low-Cycle Performance on the 3D-Printed Materials ABS, ASA, HIPS, and PLA Exposed to Mineral Oil
17/04/2024 -
Three-dimensionally printed parts are increasingly used in industry for quick repairs. They are often operated in the presence of grease, oil, and others. This article describes the effect of engine...
Weak Pinning and Long-Range Anticorrelated Motion of Phase Boundaries in Driven Diffusive Systems
-
We show that domain walls separating coexisting extremal current phases in driven diffusive systems exhibit complex stochastic dynamics with a subdiffusive temporal growth of position fluctuations...
Aerospace, Vol. 11, Pages 305: Experimental Investigation of the Mechanical Behavior of the Strain Isolation Pad in Thermal Protection Systems under Tension
12/04/2024 -
A strain isolation pad is a critical connection mechanism that enables deformation coordination between the rigid thermal insulation tile and the primary structure in the thermal protection system of...
Structural Health Monitoring for Prefabricated Building Envelope under Stress Tests
12/04/2024 -
This paper details the comprehensive activities conducted in a laboratory setting to assess the structural health monitoring (SHM) of prefabricated building envelopes. Integrating sensors into...
Impact of Insulation Strategies of Cross-Laminated Timber Assemblies on Energy Use, Peak Demand, and Carbon Emissions
13/04/2024 -
Cross-Laminated Timber (CLT) panels have many structural benefits but do not have much thermal resistance. We have developed a solution to insulate CLT structures that uses high-performance...
Metal–Organic Frameworks-Derived FeCo/C–CNT Nanocomposites Modified Epoxy Resin for Electromagnetic Protection Coatings for Buildings
15/04/2024 -
Exploring an efficient electromagnetic protection strategy for buildings is of great significance to solve the problems caused by increasing electromagnetic pollution, as the rapid progress of...
Testing Activities for Technological and Normative Validation of Bio-Based Components in Façade System Modules
15/04/2024 -
This research explores the development and validation activities of a bio-based façade system within the Basajaun H2020 project, focusing on enhancing the utilization of bio-based...
Cost Benefits of Net Zero Energy Homes in Australia
15/04/2024 -
This paper presents a systematic analysis of energy savings and cost benefits associated with several options for integrating energy efficiency and renewable energy technologies. The primary goal of...
An Analysis of the Planar Vault under the Choir Loft of the Monastery of El Escorial
15/04/2024 -
Arches and vaults are typical elements of ancient buildings. They are formed by voussoirs that resist the pressure they receive and transmit them through compression forces. The transmission of these...
Study of a Fire-Resistant Plate Containing Fly Ashes Generated from Municipal Waste Incinerator: Fire and Mechanical Characteristics and Environmental Life Cycle Assessment
15/04/2024 -
The recycling of fly ash from municipal solid waste incineration is currently a global issue. This work intends to examine the viability of a novel recycling alternative for fly ashes as a component...
Carbon Nanodisks Decorated with Guanidinylated Hyperbranched Polyethyleneimine Derivatives as Efficient Antibacterial Agents
13/04/2024 -
Non-toxic carbon-based hybrid nanomaterials based on carbon nanodisks were synthesized and assessed as novel antibacterial agents. Specifically, acid-treated carbon nanodisks (oxCNDs), as a safe...
Amphiphilic Dendronized Copolymer-Encapsulated Au, Ag and Pd Nanoparticles for Catalysis in the 4-Nitrophenol Reduction and Suzuki–Miyaura Reactions
12/04/2024 -
The branched structures of dendronized polymers can provide good steric stabilization for metal nanoparticle catalysts. In this work, an amphiphilic dendronized copolymer containing hydrophilic...
Investigation of Additive-Manufactured Carbon Fiber-Reinforced Polyethylene Terephthalate Honeycomb for Application as Non-Pneumatic Tire Support Structure
13/04/2024 -
A non-pneumatic tire (NPT) overcomes the shortcomings of a traditional pneumatic tire such as wear, punctures and blowouts. In this respect, it shows great potential in improving driving safety, and...
