Construcción
Construcción
Laser Powder Bed Fusion of Pure Zinc Electrodes for the Manufacturing of Biodegradable Batteries: Process Development and Preliminary Electrochemical Testing
18/01/2025 -
The additive manufacturing technology laser powder bed fusion enables the manufacturing of pure Zn thin walls as battery electrodes. Modification of the laser beam parameters allows to tailor the...
Solidification Mode Shifting and Resultant Composite Microstructure Evolution during High Build Rate Laser Directed Energy Deposition of SS 316L
17/01/2025 -
The change in scan strategy (0° and 90°) during high build rate L‐DED of SS 316L parts results in shifting of solidification mode. A Composite microstructure (austenitic and vermicular ferritic)...
Supramolecular Scale Hydrophilicity Regulation Enabling Efficient Dewatering and Assembly of Nanocellulose into Dense and Strong Bulk Materials as Sustainable Plastic Substitutes
19/01/2025 -
The dewatering difficulty of nanocellulose dispersion has long been a major challenge hindering its practical utilization. Here, through a supramolecular scale hydrophilicity regulation, the water...
Ten Years of Perovskite Lasers
19/01/2025 -
This review explores the advances in halide perovskite lasers, covering key topics such as emission properties, optical gain mechanisms, and diverse laser architectures. It also discusses challenges...
Scalable Synaptic Transistor Memory from Solution‐Processed Carbon Nanotubes for High‐Speed Neuromorphic Data Processing
15/01/2025 -
Scalable synaptic transistor memory from solution‐processed carbon nanotubes, exhibiting reconfigurable weights and long‐term synaptic plasticity, enables parallel neuromorphic data processing...
Scalable Synthesis of 2D ErOCl with Sub‐meV Narrow Emissions at Telecom Band
15/01/2025 -
Centimeter‐size, uniform 2D ErOCl film, and diverse 2D rare‐earth materials are grown using self‐encapsulation strategy. 2D ErOCl possesses high crystalline quality, excellent ambient and...
Engineering Highly Aligned and Densely Populated Cardiac Muscle Bundles via Fibrin Remodeling in 3D‐Printed Anisotropic Microfibrous Lattices
15/01/2025 -
This study presents the development of 3D‐printed anisotropic InterPore microfibrous lattices for engineering aligned and densely populated cardiac muscle bundles. By promoting cardiomyocyte...
A Robust, Biodegradable, and Fire‐Retardant Cellulose Nanofibers‐Based Structural Material Fabricated from Natural Sargassum
15/01/2025 -
Cellulose nanofiber and alginate from natural sargassum are used to prepare a fire‐retardant structural material through a hydrogel layer‐by‐layer method. This bio‐based material has...
Recent Progress and Advances of Perovskite Crystallization in Carbon‐Based Printable Mesoscopic Solar Cells
15/01/2025 -
This review begins by exploring the unique architecture, fabrication techniques, and operational principles of carbon‐based printable mesoscopic solar cells (p‐MPSCs), providing a comprehensive...
Effect of Chemical Foaming Process Parameters on the Performance of Epoxy Foam and Parameter Optimization Strategies
11/01/2025 -
The impact of core process parameters on the microscopic geometric parameters and uniaxial compression response of epoxy foam during the foaming process is explored through experiments designed using...
Nanoparticle‐Coated X2CrNiMo17‐12‐2 Powder for Additive Manufacturing—Part II: Processability by Powder Bed Fusion of Metals Using a Laser Beam
11/01/2025 -
In this manuscript, the processability of X2CrNiMo17‐12‐2 powder coated with silicon carbide, silicon, and silicon nitride nanoparticles is investigated. The amount of nanoparticles varies from...
Next‐Generation Embedded Printed Sensors for Near‐Field Monitoring of High‐Performance Composites
10/01/2025 -
Small‐footprint passive planar sensors are fabricated using screen printing and used to monitor ply movement during the manufacturing of carbon fiber‐reinforced polymer (CFRP) materials. Stacked...
Electrically Switchable Multi‐Stable Topological States Enabled by Surface‐Induced Frustration in Nematic Liquid Crystal Cells
10/01/2025 -
In a liquid crystal (LC) cell with well‐designed surface anchoring patterns, electrical switching between multi‐stable states with distinct optical properties is obtained. Dual‐frequency LC...
Bio‐Based Elastomers: Design, Properties, and Biomedical Applications
13/01/2025 -
This review systematically examines the recent progress of representative bio‐based elastomers derived from molecular building blocks and biopolymers, focusing on molecular design, synthesis...
Co-encapsulation of Creatininase, Creatinase, and Sarcosine Oxidase in Yeast Spore for Creatinine Degradation
-
Abstract Creatinine clearance is used to reflect the glomerular filtration rate to assess kidney function. Creatinine degradation-related enzymes have been used for creatinine...
Environmental Sustainability of Natural Biopolymer‐Based Electrolytes for Lithium Ion Battery Applications
05/01/2025 -
Twenty‐one biopolymer electrolytes including membrane‐liquid electrolytes, gel electrolytes, and solid electrolytes are synthesized to analyze their electrochemical properties and environmental...
A Bio‐Inspired Perspective on Materials Sustainability
05/01/2025 -
This perspective discusses natural materials as inspiration for sustainable engineering designs and the processing of materials. First, circularity, longevity, parsimony, and activity are presented...
A Low‐Cost, Open‐Source 3D Printer for Multimaterial and High‐Throughput Direct Ink Writing of Soft and Living Materials
02/01/2025 -
The Printess is a low‐cost, open‐source, multimaterial 3D printer for direct ink writing. Built for under $250, it is highly customizable and supports various advanced direct ink writing...
Soft, Modular Power for Composing Robots with Embodied Energy
02/01/2025 -
A worm‐like robot composed of modular, self‐contained actuators is developed. The modules with embodied zinc‐iodide redox flow batteries are fabricated using a novel bonding method, allowing...
Electro‐ and Photo‐ Dual Responsive Chromatic Devices for High‐Contrast Dimmers
30/12/2024 -
A highly transparent photochromic hydrogel electrolyte is developed, which not only serves as an electrolyte for zinc anode‐based electrochromic devices but also provides a photochromic effect to...
A Separator with Double Layers Individually Modified by LiAlO2 Solid Electrolyte and Conductive Carbon for High‐performance Lithium–Sulfur Batteries
29/12/2024 -
The charge transfer resistance of Li–S using the modified separator is reduced. In addition, there is no corrosion and the lithium anode is dendrite‐free. The ‘shuttle effect’ of polysulfides...
