Envase

 

Envase

Low Dielectric and High Thermal Conductive Phononic Crystal Nanofiber Metamaterial Film
23/04/2025 - A phononic crystal nanofiber film is fabricated via localized crystallization of polyimide (PI) induced by boron nitride nanosheets. The aligned crystalline domains form efficient phonon transport...
Lowering Toxicity of Solvent in Organic Solar Cells Manufacturing for 20% Efficiency
23/04/2025 - The acute toxicological properties of the solvents commonly used in the organic photovoltaic (OPV) are evaluated. The preparation technology of devices and micro‐modules by developing solvent...
Aerosol Jet Printing of Hybrid Ti3C2Tx MXene/PEDOT:PSS Nanospheres for Flexible Planar/Fiber Architectured Micro‐Supercapacitors
20/04/2025 - MXene/PEDOT:PSS‐based planar and fiber‐architectured flexible supercapacitors (FSCs) are fabricated using aerosol jet printing (AJP) technology. The 3D MXene‐wrinkled spherical connected by...
Retarding the Growth Kinetics of Chemical Bath Deposited Nickel Oxide Films for Efficient Inverted Perovskite Solar Cells and Minimodules
21/04/2025 - An amino‐alcohol ligand with strong binding affinity to Ni2+ is employed to modulate the growth kinetics of chemical bath deposited NiOx for preparing compact NiOx film with superior coverage,...
A Sprayable Hydrogel Based on Biomimetic Polypeptide‐Modified Lipid Nanoparticles for Treating Non‐Compressible Hemorrhaging
16/04/2025 - This study develops a sprayable hydrogel based on polypeptide‐modified lipid nanoparticles (PLNs) mimicking natural hemostasis. PLNs integrate platelet adhesion peptide (GFOGER) and platelet...
High‐Oriented SnO2 Nanocrystals for Air‐Processed Flexible Perovskite Solar Cells with an Efficiency of 23.87%
16/04/2025 - DAC‐AA into SnO2 colloids favors the crystalline phase and preferential orientation along high‐oriented (101) and (200) crystal planes by reducing surface absorption energy and modulating crystal...
Preparation of Carbon Nanotube/Epoxy Composite Films with Superior Tensile Strength and Toughness by Impregnation under Pressure and Wet Stretching
13/04/2025 - Benefiting from a high carbon nanotube (CNT) content (60.56 wt%), excellent CNT alignment from repeated prestretching, and uniform resin distribution between CNTs from pressurized impregnation and...
Scalable Lithium Niobate Nanoimprinting for Nonlinear Metalenses
14/04/2025 - A broadband polycrystalline lithium niobate platform is developed for highly versatile and scalable fabrication of nonlinear metasurfaces. This work demonstrates simultaneous second harmonic...
High‐Efficiency Large‐Area Perovskite Solar Cells via a Multifunctional Crystallization Regulating Passivation Additive
11/04/2025 - A chlorine‐substituted aromatic polycyclic compound is introduced into perovskite solar cells to regulate perovskite crystallization, passivate various defects, and enhance hole transport at the...
Achieving >23% Efficiency Perovskite Solar Minimodules with Surface Conductive Coordination Polymer
10/04/2025 - This study addresses a critical challenge in the commercialization of perovskite solar modules by reducing photovoltage loss through the in situ formation of a surface conductive coordination polymer...
Ionic Liquid and Binary Solvent Assisted Preparation of Silk Fibroin and Polyethylene Glycol Film: Structural and Mechanical Properties
11/04/2025 - ABSTRACTSilk fibroin (SF), a biodegradable and biocompatible material with excellent mechanical properties, is widely utilized in food packaging and medical applications. However, regenerated SF is...
Efficient Blue Perovskite LEDs via Bottom‐Up Charge Manipulation for Solution‐Processed Active‐Matrix Displays
09/04/2025 - A bottom‐up collaborative charge manipulation strategy is developed to minimize the interfacial charge loss in blue perovskite light‐emitting diodes, leading to stable blue electroluminescence...
Customized Multifunctional Additive Regulates 1.67 eV‐Wide‐Bandgap Perovskite Crystallization for Four‐Terminal Perovskite/Silicon Tandem Solar Cells
08/04/2025 - A doping strategy of incorporating Bis(trifluoroacetoxy)iodo)benzene (BTFIB) additive in 1.67 eV WBG perovskite precursor has been proposed to passivate uncoordinated lead ions and iodide vacancies...
High‐Efficiency Sn‐Pb Perovskite Solar Cells via Nucleation and Crystallization Control
07/04/2025 - A pumping rate‐controllable strategy regulates nucleation and crystallization in Sn‐Pb perovskites during vacuum‐flash‐assisted solution processing. This approach enables additive‐free,...
Biodegradation Studies and Material Properties of Quercetin Incorporated Soy Protein Isolate Films
07/04/2025 - ABSTRACTThe study aims to evaluate the effects of different contents of quercetin (1%–3%) on structural and morphological characteristics of soy protein isolate (SPI) based films fabricated by the...
Unraveling the Impact of Diverse Salt Solvent Systems on the Structure and Functionality of Eggshell Membrane Proteins
07/04/2025 - ABSTRACTThis study investigated the effects of different solvent systems on the microstructure, roughness, and secondary structure of soluble eggshell membrane proteins (SEPs). The solvent system of...
Elastomers for Soft Electronics: A Review from the Material's Perspective
28/03/2025 - The choice of elastomers as possible viable materials for soft electronic substrates and their state‐of‐the‐art feasible fabrication–integration technologies with the fundamental mechanisms...
Preparation and Mechanical Properties of Diamond Films on Textured WC–Co Substrate
28/03/2025 - Herein, surface texturing effects on diamond film performance are investigated. Four laser‐fabricated textures on WC–Co substrates are coated by hot filament chemical vapor deposition, with...
Robust and Antioxidative Quasi‐Solid‐State Polymer Electrolytes for Long‐Cycling 4.6 V Lithium Metal Batteries
30/03/2025 - Robust and antioxidative quasi‐solid‐state polymer electrolytes are successfully fabricated with diblock polymer brushes as multifunctional supporting films. On this basis, practical...
Narrowband Emissive Solution‐Processed Polymer Organic Light‐Emitting Diodes with External Quantum Efficiency Above 30%
27/03/2025 - High‐efficiency narrowband emissive themally activated delayed flurescence (TADF) polymers are realized by incorporating silicon─carbon σ‐bond saturated spacers between multiresonance TADF...
Synergistic Effect of Surface Microstructure and Ag3PO4 on Antimicrobial Performance of Polypropylene‐Based Composites
20/03/2025 - Herein, composites with excellent antibacterial properties are prepared by introducing Ag3PO4 into the polypropylene matrix and regulating surface microstructure. The findings indicate that...