Envase
Envase
Synergistic Strain‐Magnetic Field Modulation of Antiferromagnetic Frequency Comb
25/06/2025 -
The present work demonstrates the tunability with strain‐mediated and unique spectral features of the frequency comb in antiferromagnetic materials, which is important for the wide application of...
Restoring Ultra‐Flat Bridgman‐Fabricated Single‐Crystal Cu(111) Wafers via Recrystallization Arrest Strategy for High‐Quality Graphene Epitaxy
25/06/2025 -
By investigating strain‐ and dislocation‐induced recrystallization, a tailored staged annealing method with recrystallization arrest is developed to preserve single‐crystallinity. Ultra‐flat...
3D‐Printed Sulfonated Polyetheretherketone Porous Scaffold Modified by Bioactive Glass for Bone Repair
25/06/2025 -
ABSTRACTThe bioinert characteristics of the polyetheretherketone (PEEK) matrix determine that the PEEK scaffolds cannot display bioactivity in bone regeneration. Scaffolds that combine the excellent...
Covalent Surface Modification of Hydrophobic Alkoxides on Ti3C2Tx MXene Nanosheets Toward Amphiphilic and Electrically Conductive Inks
23/06/2025 -
Electrically conductive and amphiphilic MXene inks are achieved by surface modification of sodium alkoxides, where surface‐modified MXenes are dispersible both in water and in non‐polar solvents...
Carbazole‐Based Thin Microporous Polymer Films for Photocatalytic Hydrogen Evolution
23/06/2025 -
Photocatalytic hydrogen evolution with electropolymerized microporous films enable a direct and scalable process for the production of industrial relevant amounts of hydrogen gas. For developing...
π‐Extended Viologen‐Based Lyotropic Chromonic Liquid Crystal Reactive Mesogen: Uniaxial Orientation and Photopolymerization for Transmittance and Color Controllable Electrochromic Smart Glass
20/06/2025 -
The newly synthesized π‐extended viologen‐based lyotropic chromonic liquid crystal (πV‐LCLC) reactive mesogen (RM) is used for the fabrication of polarization‐dependent and color‐tunable...
Liquid Bridges Mediate Crack Initiation, Propagation, and Coalescence to Suppress Film Failure within Flexible Electronics
18/06/2025 -
Gold films deposited on capillary‐stabilized fluidic cushion of ionic‐liquid‐infused nanopillar arrays show enhanced stability under large strains (∼ 180%) by effective control, mediated...
An Ultrathin Membrane with Bubble‐Raft‐Inspired Single‐Layer Nanofibrous Networks for Efficient and Low‐Resistance Air Filtration
18/06/2025 -
A bubble‐raft‐inspired nanofibrous network membrane for efficient and low‐resistance air filtration is fabricated via electrospinning and phase separation. Benefiting from the single‐layer...
Self‐Repairing Effect of Nanoserpentine Mineral Powder as an Additive on Steel/Aluminum Alloy Tribological Interface Under Oil Lubrication
15/06/2025 -
This study investigates nanoserpentine as a lubricant additive for steel/aluminum alloy interfaces, showing 41.37%–58.1% friction and 18.91%–76.3% wear reductions. Tribochemical reactions form a...
Large Area Low‐Cost Functional Ceramic Films with High Second Harmonic and Third Harmonic Light Absorption by Two‐Step Fabrication
12/06/2025 -
Functional ceramic films with average absorption of 90% in the near UV to visible range is fabricated on aluminum alloy mental frame of inertial confinement fusion (ICF) system composed of nonporous...
Porogen‐Integrated Rapid Oxidation Enables Structured Mesoporous Metal Oxide Films
13/06/2025 -
Porogen‐integrated rapid oxidation (PiRO) is a method for high throughput manufacturing of mesoporous metal oxide thin films. PiRO generates up to 500 nm thick layers with through‐plane 5–10 nm...
Construction of Gradient Structure Based on Janus MXene Film Contributing to Bioinspired Actuating Performances
10/06/2025 -
This article reports a Janus MXene film actuator fabricated by one‐step vacuum filtration through a Celgard 3501 membrane. Such actuator can respond to sweat, body heat, and Joule heat and are...
Multi‐Mode Mechanochromic Responses from Cholesteric Liquid Crystal Elastomer Tubes of Uniform Sheath
10/06/2025 -
The structural‐colored tube is created from cholesteric liquid crystal elastomers, exhibiting uniform color changes with high strain sensitivity upon extension and inflation. The color change...
Stretchable, Multiplexed, and Bimodal Sensing Electronic Armor for Colonoscopic Continuum Robot Enhanced by Triboelectric Artificial Synapse
05/06/2025 -
Colonoscopic continuum robots lack sensing, endangering intestinal tissue. An ideal sensing array is hard to integrate. This work introduces a 3D crosslinked stretchable E‐armor with...
An Implantable and Degradable Silk Sericin Protein Film Energy Harvester for Next‐Generation Cardiovascular Electronic Devices (Adv. Mater. 22/2025)
05/06/2025 -
Silk Sericin Protein Film Energy HarvesterSilk sericin (SS), a key component of silk, envelops silk fibroin and provides protection and adhesion. In article number 2413610, Lin Wang, Zheng Wang, and...
Charge Transport and Carrier Polarity Tuning by Electrolyte Gating in Nickel Benzenehexathiol Coordination Nanosheets
04/06/2025 -
This work reveals that charge transport in nickel benzenehexathiol coordination nanosheets is governed by variable‐range hopping reflecting structural disorder. Electrolyte gating induces a switch...
Modular Molecular Editing of End‐of‐Life PBT for High‐Performance Sustainable and 3D‐Printable Platforms
04/06/2025 -
Inspired by DNA editing, a modular molecular editing strategy is proposed to upcycle end‐of‐life poly(butylene terephthalate) (PBT) into a high‐performance, sustainable, and 3D‐printable...
Quantifying the Effects of Geometric Parameters on the Elastic Properties of Multilayer Graphene Platelet Films
02/06/2025 -
Realistic random 3D periodic representative volume element models of multilayer graphene platelet films are constructed to perform simulations, quantify the effects of different geometric parameters...
High‐Performance Phototransistor Based on a 2D Polybenzimidazole Polymer
01/06/2025 -
A crystalline 2D polybenzimidazole polymer (2DPBI), incorporating a porphyrin‐based π‐system linked via 1,3‐diazole units, is synthesized on the water surface over large areas. The 2DPBI...
Adhesively Bridging Co‐Self‐Assembled Monolayer and Perovskite Via In Situ Polymerization for Enhanced Stability of Inverted Perovskite Solar Cells
01/06/2025 -
A synergistic interface engineering strategy is introduced that combines a co‐assembled monolayer with in situ polymerization to optimize the buried interface of perovskite film. The polymerized...
Interface‐Directed Growth of Tin Perovskite for Efficient Light‐Emitting Diodes
30/05/2025 -
Tin perovskites suffer from uncontrolled crystallization, leading to high defect density and poor LED performance. A substrate modification strategy is introduced to regulate interfacial nucleation...
