Materiales avanzados
Materiales avanzados
The Effect of SiO2 Particle Size on Crystallization Behavior and Space Charge Properties for SiO2/MMT/LDPE Composites
31/03/2024 -
The matrix material used in this paper was low-density polyethene (LDPE), and the added particles selected were silicon oxide (SiO2) particles and montmorillonite (MMT) particles. The sizes of the...
Molecular dynamics simulation of the effects of intermolecular interactions on the diffusion mechanism of 1,2,3-benzotriazole in low density polyethylene
28/03/2024 -
Abstract It is of great significance to understand the diffusion rate of the volatile corrosion inhibitor (VCI) in the VCI films for corrosion inhibition. The diffusion behavior...
Morphological and Chemical Characteristics of Microplastics in Surface Water of the Vaal River, South Africa
-
Microplastics research in South Africa has focused on marine and coastal areas, with limited studies reporting microplastics in freshwaters. To address this gap, we conducted this study to...
Influence of LLDPE on the mechanical properties improvement of 3D printed POE/LLDPE blends
26/02/2024 -
Different stages of preparation, evaluation and presentation of energy absorption applications for 3D printed LDPE?POE blends.Polyolefins and polyolefin elastomers (POEs) are widely used in various...
Low-Density Polyethylene-Based Novel Active Packaging Film for Food Shelf-Life Extension via Thyme-Oil Control Release from SBA-15 Nanocarrier
26/02/2024 -
The use of natural raw substances for food preservation could provide a great contribution to food waste reduction, circular economy enhancement, and green process application widening. Recent...
Sustainable Asphalt Mixtures with Enhanced Water Resistance for Flood-Prone Regions Using Recycled LDPE and Carnauba–Soybean Oil Additive
22/02/2024 -
This manuscript presents a comprehensive study on the sustainable optimization of asphalt mixtures tailored for regions prone to flooding. The research addresses the challenges associated with water...
The Influence of TiO2–Lignin Hybrid Fillers in Low-Density Polyethylene Composites on Photocatalytic Performance and UV-Barrier Properties
08/02/2024 -
The main objective of this study was to discover new packaging materials that could integrate one of the most expected properties, such as UV protection, with a self-cleaning ability defined as...
Identification of Plastics in Mixtures and Blends through Pyrolysis-Gas Chromatography/Mass Spectrometry
26/12/2023 -
In this paper, the possibility of detecting polymers in plastic mixtures and extruded blends has been investigated. Pyrolysis–gas chromatography/mass spectrometry (py-GC/MS) allows...
Exploring the Plastic Collection and Recycling Trends in Sri Lanka
26/11/2023 -
This study examined plastic waste management in Sri Lanka, concentrating on the contributing factors to plastic waste generation and collection. Data were gathered through a questionnaire survey from...
Investigation on AC and DC Breakdown Mechanism of Surface-Ozone-Treated LDPE Films under Varied Thicknesses
22/11/2023 -
Electrical breakdown is an important physical phenomenon in power equipment and electronic devices. Recently, the mechanism of AC and DC breakdown has been preliminarily revealed as...
Crystallinity and Oscillatory Shear Rheology of Polyethylene Blends
26/09/2023 -
Crystallinity and rheological behavior are significant for processing semi-crystalline polymers with fine mechanical properties. There is always an economical need to create a less expensive new...
Thermoplastic Electromagnetic Shielding Materials from the Integral Recycling of Waste from Electronic Equipment
22/09/2023 -
The European Green Deal’s goals are anticipated to be fulfilled in large part thanks to the New Circular Economy Action Plan. It is believed that recycling materials will have a...
Influence of Ageing on Optical, Mechanical, and Thermal Properties of Agricultural Films
04/09/2023 -
Plastic films utilized as greenhouse coverings play a vital role in safeguarding plantations from diverse weather conditions like sunlight, rain, hail, and wind. It is essential for these films to...
Laboratory Studies about Microplastic Aging and Its Effects on the Adsorption of Chlorpyrifos
19/08/2023 -
The constant change in microplastics (MP) due to exposure to environmental conditions leads to physical and chemical changes that enhance their ability to transport other pollutants, increasing the...
Plant Design for the Conversion of Plastic Waste into Valuable Chemicals (Alkyl Aromatics)
14/08/2023 -
The exponential increase in production and consumption of plastic has led to accumulation of plastic waste in the environment, resulting in detrimental impacts on human health and the natural...
Advances in the Sustainable Use of Plastics in Horticulture—Perspectives, Innovations, Opportunities, and Limitations
27/07/2023 -
The use of plastics in horticulture is reviewed with respect to its sustainability based on the traditional criteria of triple Rs (reduce, reuse, and recycling) plus a re-place strategy, taking into...
Thymol@activated Carbon Nanohybrid for Low-Density Polyethylene-Based Active Packaging Films for Pork Fillets’ Shelf-Life Extension
03/07/2023 -
Τhe replacement of food packaging additives and preservatives with bio-based antioxidant/antibacterial compounds has been a common practice in recent years following the trend of...
Reinforcing the mechanical properties of bamboo fiber/low density polyethylene composites with modified bamboo-woven structure
01/07/2023 -
Abstract In order to improve the environmental problems caused by the extensive use of plastics, this paper introduced a new strategy to add and modify the physical structure,...
New 2.5?D twin screw extruder model for the feed section of a co?rotating twin screw extruder with comparisons to data
27/03/2023 -
Twin screw extruder unit operation.Many polymers are processed and compounded in co?rotating, fully intermeshing twin screw (TS) extruders. The typical compounding process consists of multiple unit...
A novel phytic acid based flame retardant to improve flame retardancy, hydrophobicity and mechanical properties of linear low?density polyethylene
04/03/2023 -
A new phytic acid based flame retardant was used to improve the flame retardancy, mechanical properties and water resistance of linear low density polyethylene.Exploiting high phosphorus content of...
Synthesis of a New Flocculant from Waste Polystyrene: Plastic Recycling Industry Wastewater Treatability
-
HDPE (high-density polyethylene), LDPE (low-density polyethylene), PET (polyethylene terephthalate), and PP (polypropylene) plastic washing wastewater contains high concentrations of turbidity, COD...
