Materiales avanzados
Materiales avanzados
Mouldable Conductive Plastic with Optimised Mechanical Properties
23/01/2024 -
This paper investigates making an injection mouldable conductive plastic formulation that aims for conductivity into the electromagnetic interference (EMI) shielding range, with good mechanical...
Understanding the structural changes, interfacial mechanisms, and mechanical properties of polymer/MWCNT nanocomposites after microwave treatment
13/12/2023 -
Schematic representation of the effect of microwave radiations on the elongation of the bulk sample as well as the change in response of MWCNTs before and after treatmentThe use of microwave...
A Study on the Impermeability of Nanodispersible Modified Bentonite Based on Colloidal Osmotic Pressure Mechanisms and the Adsorption of Harmful Substances
11/06/2023 -
With the growing demands of human beings, sanitary landfill, along with the increase in landfill depth and leachate water pressure, has put forward new and higher requirements for the impermeable...
Test Rig for The In Situ Measurement of The Elastic Tooth Deflection of Plastic Gears
30/03/2023 -
A new steel–plastic gear set testing methodology has been developed at the Institute of Polymer Technology (LKT). The in situ gear test rig analyses the timing differences between the...
The Influence of the Use of Technological Waste and the Simulation of Material Lifetime on the Unnotched Impact Strength of Two Different Polymer Composites
29/11/2022 -
The article deals with the assessment of the impact of technological polymer waste resulting from plastic injection technology and the subsequent simulation of the lifetime of polymer products on the...
Renovating Building Groups in the Mediterranean Climate: Cost-Effectiveness of Renewable-Based Heating Alternatives in the Italian Context
27/09/2022 -
District level approaches for the renovation of the building stock boost the implementation of energy efficiency measures (EEMs), taking advantage of the economies of scale. International Energy...
Aminolysis of polyesters for cracking and structure clarifying: A review
17/08/2022 -
Cracking of polyester bottles and recycling the waste, which is of concern in the current research works have their roots in the environmental stress cracking and the physical structural analysis,...
Compressive Properties of Polyurethane Fiber Mattress Filling Material
16/06/2022 -
There is an inevitable trend toward exploring new, environmentally friendly fibers that can be used as raw material for mattresses with moderate hardness and air-permeable characteristics....
Recycling of Wastes Deriving from the Production of Epoxy-Carbon Fiber Composites in the Production of Polymer Composites
24/04/2022 -
The formulation of composites reinforced with shredded epoxy-carbon fibers wastes is investigated. Poly (buthylene terephthalate) PBT was selected as the matrix for the composites. In order to...
Impact of brominated flame retardants on lipid metabolism: An in vitro approach
-
Brominated flame retardants (BFRs) are chemicals employed to lower the flammability of several objects. These endocrine disruptor chemicals are lipophilic and persistent in the environment. Due to...
The Impact of Artificial Marble Wastes on Heat Deflection Temperature, Crystallization, and Impact Properties of Polybutylene Terephthalate
03/12/2021 -
As artificial marble is abundant and widely used in residential and commercial fields, the resource utilization of artificial marble wastes (AMWs) has become extremely important in order to protect...
Redesign of the Geometry of Parts Produced from PBT Composite to Improve Their Operational Behavior
31/07/2021 -
Parts produced from PBT-GF30 (70% polybutylene terephthalate +30% fiberglass) are very often used in car construction, due to the properties of this material. The current trend is to make parts with...
Persistence, bioaccumulation and toxicity-assessment of petroleum UVCBs: A case study on alkylated three-ring PAHs
-
Substances with (very) persistent, (very) bioaccumulative, and/or toxic properties (PBT/vPvB) are of environmental concern and are identified via hazard-based PBT-assessment approaches. The...
