Materiales avanzados
Materiales avanzados
Aramid Nanofiber Aerogels: Preparation, Modification, Composite Fabrication, and Applications
06/07/2025 -
Different forms of aramid nanofibers (ANFs) and especially aerogels from them, offer a sustainable route to high‐performance biomimetic nanocomposites. Due to the cartilage‐like architecture,...
The Future of MXene Fibers
25/06/2025 -
This perspective explores the diverse applications of MXene fibers, including those often overlooked in fiber‐focused studies. It emphasizes the critical need to address challenges in synthesis,...
On‐the‐Fly Synthesis of Freestanding Spin‐Crossover Architectures With Tunable Magnetic Properties
13/06/2025 -
3D flow‐focusing devices are an ideal platform for the processing and integration of functional materials within polymeric matrices. In this article, A. Tuan Ngo, D. Aguilà, T. Sotto Mayor, M....
Carbon‐Nanotube Synergized Robust Enzymatic‐Fuel‐Cell in Gel Microneedle for Self‐Powered Monitoring and Forecasting
04/06/2025 -
A gel microneedle bioelectrodes device, with the enzymatic biofuel cells‐based monitor strategy, wireless data capture and visualization model. This devices can track the physiological activities...
Low Dielectric and High Thermal Conductive Phononic Crystal Nanofiber Metamaterial Film
23/04/2025 -
A phononic crystal nanofiber film is fabricated via localized crystallization of polyimide (PI) induced by boron nitride nanosheets. The aligned crystalline domains form efficient phonon transport...
Electrospinning and Nanofiber Technology: Fundamentals, Innovations, and Applications
07/04/2025 -
This review explores electrospinning fundamentals, methods for synthesizing polymer, metal oxide, carbon, and composite nanofibers, and advancements in fiber architectures like porous, core–shell,...
Engineering Aramid III/Polyvinyl Alcohol Composite Porous Fiber for Thermal Insulation and Warmth Retention
03/03/2025 -
Aramid III/polyvinyl alcohol (PVA) composite porous fibers are prepared by blending aramid III solution with PVA for wet spinning. The resulting fibers exhibit good mechanical properties, high...
Waveguide Microactuators Self‐Rolled Around an Optical Fiber Taper
16/02/2025 -
A novel self‐rolling integration strategy mounts ultrathin (≈2 µm) poly(N‐isopropylacrylamide)/Au microactuators onto optical fiber tapers, achieving unprecedented bending angles (>800°) and...
Broadband Near‐Infrared Fibers Derived from Nanocrystal‐Glass Composites for Miniature Arrays Light Sources
29/01/2025 -
The design synthesis of highly efficient Cr3+‐doped broadband near‐infrared (NIR) nanocrystal‐glass composite (NGC) and the following NGC fiber fabrication for the miniature array light sources...
Supramolecular Organic Nanofiller: A New Reinforcement Strategy for Dynamic Covalent Polymer Networks Toward Upcycling of Carbon Fiber Composites
22/01/2025 -
A new reinforcement strategy for DCPN involving the in situ formation of supramolecular organic nanofillers via asynchronous polymerization is proposed. The reinforcement and recyclability of the...
Emerging Sustainable Structural Materials by Assembling Cellulose Nanofibers
10/12/2024 -
Cellulose nanofiber (CNF) has unique intrinsic physical properties, showing great potential for constructing sustainable materials. This review introduces emerging CNF‐based structural materials,...
Segmented, Side‐Emitting Hydrogel Optical Fibers for Multimaterial Extrusion Printing
04/12/2024 -
Soft side‐emitting optical fibers are fabricated by multimaterial extrusion printing of hydrogel inks with contrasting optical properties. Scattering segments are distributed along waveguiding...
Poly(Lactic Acid): Recent Stereochemical Advances and New Materials Engineering
17/11/2024 -
Poly(lactic acid) (PLA) is a representative biobased and biodegradable polyester among sustainable materials. This review covers the basic structural variety of PLA, current states of...
Structural and Viscoelastic Properties of Bacterial Cellulose Composites: Implications for Prosthetics
18/11/2024 -
This study investigates the morphological, mechanical, and viscoelastic properties of bacterial cellulose (BC) hydrogels synthesized by the microbial consortium Medusomyces gisevii. BC gel films were...
A novel thermoplastic material: Pre?polymerized PMMA liquid resin and continuous glass fiber?reinforced composite initiated by benzoyl peroxide/N,N?dimethylaniline
07/11/2024 -
The oxidative reduced bulk polymerization system of MMA with BPO/DMA as composite initiator was used to study the effects of the ratio of BPO to DMA and the amount of overall initiator on the...
On the Effect of Fibre Orientation and MWCNTs on the Strain?Sensing Performance of TPU/PANI Electrospun Nanofibres
08/11/2024 -
ABSTRACTThe increasing demand for flexible electromechanical devices with superior stretchability, durability, thermal stability and sensitivity has driven the development of new smart functional...
Preparation and physical properties of basalt fiber-reinforced silica aerogels
02/11/2024 -
Abstract With increasing demand for high-performance materials in modern industry, lightweight, high-strength, and excellent thermal insulation materials have become a hot topic...
Synthesis of Stearyl Alcohol/Polyethylene Glycol Hybrids as Water-Repellent Finishes for Cotton/Polyester Blended Fabric
29/10/2024 -
Nowadays, developing and innovation of new finishing agents that are cost effective, efficient, durable, and safe for the consumer as well as the environment are greatly required by the textile...
Influence of Chemical, Morphological, Spectroscopic and Calorimetric Properties of Agroindustrial Cellulose Wastes on Drainage Behavior in Stone Mastic Asphalt Mixtures
30/10/2024 -
New asphalt mixtures have been improved by using fibers (polypropylene, polyester, asbestos, carbon, glass, nylon, lignin, coconut, sisal, recycled rubber, PET, wood, bamboo, and cellulose), reducing...
Melt?functionalization of cellulose nanocrystals using dynamic hindered ureas
15/10/2024 -
Cellulose nanocrystal (CNC)?reinforced composites are gaining commercial attention on account of their high strength and sustainable sourcing. Grafting polymers to the CNCs in these composites has...
Designing injectable dermal matrix hydrogel combined with silver nanoparticles for methicillin-resistant Staphylococcus aureus infected wounds healing
17/10/2024 -
Hydrogel-based delivery systems have now emerged as a pivotal platform for addressing chronic tissue defects, leveraging their innate capacity to suppress pathogenic infections and facilitate...
