Materiales avanzados
Materiales avanzados
Preparation and characterization of halloysite nanotube?silica/silicone rubber composites: Effect of HNTs on mechanical and thermal properties
16/04/2024 -
Preparation of HNTs?SiO2/SR and its properties.A series of halloysite nanotube?silica (HNTs?SiO2) nanocomposite fillers were prepared by in?situ assembly, and a reinforced SiO2/SR composite was...
Antifouling efficiency of polymer coatings with SeNPs-loaded SiO2(rh)-PHMG composite as antimicrobial agent
08/04/2024 -
AbstractSilica from rice husk [SiO2(rh)] was used as a mineral base for sequential loading of biogenic selenium nanoparticles (SeNPs) and polyhexamethylene guanidine (PHMG) hydrochloride. As...
Recent advancements in silica filled natural rubber composite: A green approach to achieve smart properties in tyre
08/04/2024 -
Abstract The partial or total replacement of carbon black by silica fillers is initiated through various techniques for environment-friendly, smart, and fuel-efficient NR...
The Synergistic Effect of Carbon Black/Carbon Nanotube Hybrid Fillers on the Physical and Mechanical Properties of EPDM Composites after Exposure to High-Pressure Hydrogen Gas
11/04/2024 -
This study investigated the synergistic effect of carbon black/multi-wall carbon nanotube (CB/MWCNT) hybrid fillers on the physical and mechanical properties of Ethylene propylene diene rubber (EPDM)...
Honeycomb networks of boron nitride/nanodiamond with interlocking interfaces enhance the application reliability of silicone rubber thermal conductivity composites
10/04/2024 -
The boron nitride/nanodiamond honeycomb networks with interlocking interfaces maintain their high thermal conductivity even after experiencing significant compression and bending.The...
Super?Ionic Conductor Soft Filler Promotes Li+ Transport in Integrated Cathode?Electrolyte for Solid?State Battery at Room Temperature
07/04/2024 -
Composite polymer solid electrolytes (CPEs), possessing good rigid?flexible, are expected to be used in solid?state lithium metal batteries. The integration of fillers into polymer matrices emerges...
PVDF Nanocomposites as Piezoelectric Nanogenerator: Properties, Fabrication and Market Applications
02/04/2024 -
Depletion of fossil fuels and increase in pollution through chemical batteries trigger the development of self?powered devices based on flexible piezoelectric nanogenerators. Biocompatible...
Wear Behavior Assessment of New Wire-Arc Additively Manufactured Surfaces on AA6061 and AA5086 Alloys through Multi-Walled Carbon Nanotubes and Ni Particles Inducement
03/04/2024 -
This study investigates the new surface development on AA6061 and AA5086 alloys considering the wire-arc additive manufacturing technique as a direct energy deposition (DED) process of wire. Two...
Strain Monitoring of Concrete Using Carbon Black-Based Smart Coatings
29/03/2024 -
Given the challenges we face of an ageing infrastructure and insufficient maintenance, there is a critical shift towards preventive and predictive maintenance in construction. Self-sensing...
Effect of 1?ethylpyridinium bromide on enhancing the dispersion of silica and interfacial strength in rubber?silica composite
29/03/2024 -
The amount of ionic liquids can control the micro and macro?properties of composites.Improving the interfacial interaction between silica and rubber is always a key issue to be solved for...
Experimental and numerical investigation on the elastic properties of luffa–cenosphere?reinforced epoxy hybrid composite
30/03/2024 -
Experimental and numerical investigation on the elastic properties of luffa–cenosphere?reinforced epoxy hybrid composite.Estimating the elastic characteristics of natural fiber?reinforced polymer...
Dual cross?linking of XNBR latex with epoxy?functional calcium silicate particles for the production of accelerator?free medical gloves
26/03/2024 -
(a) Preparation technology of SSP/EP composite, (b) thermal conductivity, and (c) flexural strength.AbstractIn recent years, the packaging industry has utilized electronic packaging materials with...
Reduced Graphene Oxide Modified Nitrogen-Doped Chitosan Carbon Fiber with Excellent Electromagnetic Wave Absorbing Performance
27/03/2024 -
Lightweight and low-cost one-dimensional carbon materials, especially biomass carbon fibers with multiple porous structures, have received wide attention in the field of electromagnetic wave...
Mechanical, fracture, and environmental performance of greener polymer composites containing low to high micro fillers with recycled and byproduct origins
26/03/2024 -
A brief presentation of study procedure and observed results.Polymer adhesives have considerable mechanical and environmental privileges; however, their high price makes them uncommercial for common...
Atomic?Level Matching Metal?Ion Organic Hybrid Interface to Enhance Energy Storage of Polymer?Based Composite Dielectrics
22/03/2024 -
In this work, a distinctive “metal?ion organic hybrid interface” (MOHI) between polyimide (PI) and calcium niobate (CNO) nanosheets was designed. The metal ions in the MOHI could achieve...
Biobased Composites of Poly(Lactic Acid) Melt Compounded with Bacterial and Vegetal Nanocelluloses Incorporated through Different Strategies
25/03/2024 -
In the current contribution, bacterial nanocellulose obtained from a by-product of Kombucha tea production and vegetal nanocellulose isolated from milled rice husks were employed as fillers of...
Recent Advances in Nanoclay? and Graphene?Based Thermoplastic Nanocomposites for Packaging Applications
22/03/2024 -
This review paper focuses on recent developments in nanoclay? and graphene?based thermoplastic nanocomposites for packaging applications. The review paper discusses the preparation, characterization...
Utilizing Fine Marine Sediment as a Partial Substitute for Sand in Self-Compacting Concrete Specially Designed for Application in Marine Environments
20/03/2024 -
The disposal of marine sediments poses a significant economic and environmental challenge on a global scale. To address this issue and promote resource optimization within a circular-economy...
Preparation of high?performance bismuthene thermoelectric composites doped with graphene using UV?curing 3D printing technology
18/03/2024 -
A thin film bismuthene nanosheet thermoelectric composite was prepared using 3D printing technology. Excellent thermoelectric performance was demonstrated.Thermoelectric materials are of tremendous...
New role of ionic liquid as accelerator activator in rubber compounds and its influence on curing and mechanical properties
18/03/2024 -
Interaction of Ionic liquid in rubber compounds in presence of activator and accelerator.This study focuses on the effect of ionic liquids (ILs) on the cure characteristics and filler dispersion of...
Enhancing the Thermal Conductivity of CNT/AlN/Silicone Rubber Composites by Using CNTs Directly Grown on AlN to Achieve a Reduced Filler Filling Ratio
15/03/2024 -
Achieving the thermal conductivity required for efficient heat management in semiconductors and other devices requires the integration of thermally conductive ceramic fillers at concentrations of 60...
