Otros
Otros
Rapid preparation of liquid?free, antifreeze, stretchable, and ion?conductive eutectic gels with good compression resistance and self?healing properties by frontal polymerization
26/05/2023 -
Thermal?stability and toughening behavior with adding of carbonaceous fillers.AbstractIn this work, polymer blend nanocomposites based on carbon fillers were produced via melt?compounding in a...
Response-Surface-Methodology-Based Optimization of High-Quality Salvia hispanica L. Seed Oil Extraction: A Pilot Study
29/05/2023 -
Chia seeds play an important role in human health and nutrition since they contain dietary fiber, lipids, protein, polyphenolic compounds, and polyunsaturated fatty acids. The present study aimed to...
Study on the mechanical and thermal parameters of PBX during the vertical extrusion charging process
23/05/2023 -
Abstract To tackle challenges of man-machine contact, manual operation, and low degree of mechanical automation in the charging process of traditional polymer bonded explosive...
Assessing the Impact of Roasting Temperatures on Biochemical and Sensory Quality of Macadamia Nuts (Macadamia integrifolia)
24/05/2023 -
Depending on the temperature regime used during roasting, the biochemical and sensory characteristics of macadamia nuts can change. ‘A4′ and...
Insights into Anthropogenic Micro- and Nanoplastic Accumulation in Drinking Water Sources and Their Potential Effects on Human Health
23/05/2023 -
Anthropogenic microplastics (MPs) and nanoplastics (NPs) are ubiquitous pollutants found in aquatic, food, soil and air environments. Recently, drinking water for human consumption has been...
Improved interfacial polarization of poly(vinylidene fluoride?chlorotrifluoroethylene) composite with BaTiO3@polyaniline core?shell fiber
20/05/2023 -
Highly loaded flame retardant low density polyethylene composites are successfully prepared by melt mixing. An optimum MH/MC weight ratio of 60/40 provides the highest LOI value of 32.5% and a...
Pilot-Scale Production of Hemicellulose Ethers from Softwood Hemicelluloses Obtained from Compression Screw Pressate of a Thermo-Mechanical Pulping Plant
19/05/2023 -
Bio-derived materials are becoming increasingly sought-after as a sustainable alternative to petrochemical-derived polymers. In the present pilot-scale study, a hemicellulose-rich compression screw...
Mechanical and thermal properties of polyamide?6 nanocomposites reinforced by graphene oxide with low loading by double extrusion method
18/05/2023 -
The high toughness, high abrasion resistance, and high water absorption capacity of polyamide?6 (PA6), and the restacking of graphene oxide (GO) sheets make it quite challenging to get uniformly...
Monitoring food quality ? effect of curcumin in the development of polyethylene/thermoplastic starch based smart packaging
16/05/2023 -
Curcumin?containing film process.Smart packaging relies on the one?to?one interaction of food with its packaging or its environment to monitor food quality and safety. Colorimetric pH indicators...
A New Mode of a Natural Convection Solar Greenhouse Dryer for Domestic Usage: Performance Assessment for Grape Drying
12/05/2023 -
It is known that the natural convection (NC) solar drying process is a simple and cheap method for drying foodstuffs, but it is not preferable for common users in the case of drying high-moisture...
Correction factors for the drag and pressure flows of power?law fluids through rectangular ducts
12/05/2023 -
Hybrid modeling approach including analytical, numerical, and data?based modeling techniques.There are many industrial examples of low Reynolds number non?Newtonian flows through rectangular ducts in...
Assessment of energy, exergy, environmental, and economic study of an evacuated tube solar dryer for drying Krishna Tulsi
27/04/2023 -
In the present work, experimental studies of drying Krishna tulsi leaves in an in-house fabricated evacuated tube solar collector (ETSC) connected with an indirect solar dryer are carried out. The...
Controllable cross?linking of VA?co?VAm/PAN composite membranes for efficient pervaporation desalination under extreme pH conditions
13/04/2023 -
AbstractIn chip manufacturing, ultraclean environment is essential during wet processes such as etching, cleaning, and other stages. The fittings used in the process require corrosion resistance,...
Antimicrobial and UV protective chitosan/lignin multilayer nanocoating with immobilized silver nanoparticles
07/04/2023 -
AbstractOne?step extrusion foaming process of biodegradable poly(lactic acid) (PLA)?based nanocomposites in the presence of chemical foaming agent and chain extender has great complexity to control....
Enhancing Natural Rubber Tearing Strength by Mixing Ultra-High Molecular Weight Polyethylene Short Fibers
01/04/2023 -
Rubber products generally need to have high resistance to abrasion, tear, and cutting. Filling short fiber with strong mechanical properties and forming a net in the rubber matrix is a good method to...
Effect of Changing Belt Tension on Machining Surface of CNC Lathe Spindle
03/04/2023 -
Computer numerical control (CNC) lathes are optimized for machining workpieces into rotating shafts or cylindrical shapes of structures. However, because rotating mechanical parts are used on CNC...
Material Recycling for Manufacturing Aggregates Using Melting Slag of Automobile Shredder Residues
27/03/2023 -
The quantity of waste from end-of-life vehicles is increasing with an increase in the number of scrapped internal combustion engine vehicles owing to international trends such as carbon neutrality...
Controllable Production of Natural Silk Nanofibrils for Reinforcing Silk-Based Orthopedic Screws
25/03/2023 -
As a natural high-performance material with a unique hierarchical structure, silk is endowed with superior mechanical properties. However, the current approaches towards producing regenerated silk...
Research on the Particle Breakage Mechanism in High-Speed Shear Wet Granulation
24/03/2023 -
During the operation of a high-speed shear wet granulator, the rotation of the granulation components leads to the emergence of the phenomenon of particle breakage, which results in changes in...
New 2.5?D twin screw extruder model for the feed section of a co?rotating twin screw extruder with comparisons to data
27/03/2023 -
Twin screw extruder unit operation.Many polymers are processed and compounded in co?rotating, fully intermeshing twin screw (TS) extruders. The typical compounding process consists of multiple unit...
