Bioplásticos

 

Bioplásticos

Bio‐Inspired Nanoengineered Wood for Scalable Monolithic Gas Sensor Fabrication
02/07/2025 - Inspired by insect olfactory structures, a bionic nanoengineered wood scalable monolithic gas sensor fabrication is developed. By precisely constructing vertical microchannels and sulfur‐vacancy...
Electrospun Lignin/ZnO Nanofibrous Membranes for Self‐Powered Ultrasensitive Flexible Airflow Sensor and Wearable Device
02/07/2025 - This study explores the novel sensing applications of water evaporation‐induced power generation, by using lignin/ZnO nanofibrous membranes for sensing airflow through output voltage variation....
Surface‐Engineering Cellulose Nanofibers via In Situ PEDOT Polymerization for Superior Thermoelectric Properties
30/06/2025 - A strategy for homogeneous in situ polymerization of poly(3,4‐ethylenedioxythiophene) along cellulose nanofibril surfaces is presented. Featuring enhanced charge delocalization and exceptional...
Assessing food by-products macrocomposition by FTIR microspectroscopy
- Food by-products offer a promising opportunity for extracting valuable compounds that can be used in the food, pharmaceutical, and polymer industries. However, unpredictable variations in the...
Comparative Evaluation of Dilute Acid, Alkaline, and Deep Eutectic Solvent Pretreatments on Enzymatic Hydrolysis of Sunflower Stalk Bark
- In this study, in order to overcome the recalcitrance of sunflower stalk bark (SSB) residues, three kinds of pretreatment methods, i.e., dilute acid pretreatment, alkaline pretreatment, and deep...
Optimizing Submerged Fermentation Conditions of Aspergillus niger for Chitin Production
- Chitin, a biopolymer precursor to chitosan, can be obtained from fungal sources. To ensure viable and scalable production, the use of alternative culture media and the optimization of cultivation...
Optimization of Alkaline Pretreatment and Structural Insights for Converting Eucalyptus Sawdust and Sugarcane Bagasse into Cellulosic Sugars
- The efficient conversion of lignocellulosic biomass into fermentable sugars is critical for the sustainable production of biofuels and bioproducts. This study optimized mild alkaline pretreatment...
Copper Oxide Nanoparticles: Characterization, Photocatalysis, and Biomedical Applications
30/06/2025 - Discover a sustainable approach to synthesizing copper oxide nanoparticles (CuO NPs) using potato starch as a green reducing and stabilizing agent. This method yields CuO NPs with a 13.92 nm...
A Readily Degradable Polyvinyl Alcohol/Starch Membrane Containing Catechol-Grafted Microcrystalline Cellulose for Preserving Fruit Freshness
- Copolymer membranes based on polyvinyl alcohol (PVA) and starch suffer from low mechanical strength and poor fresh-produce preservation and degradation performance. Adding functional cellulose or...
Preparation and Characterization of Cellulose Filled With Hydroxyapatite Biocomposite Film
28/06/2025 - Processing sequence of biocomposite film.ABSTRACTThe packaging industry remains largely dominated by non‐degradable synthetic materials, raising environmental concerns and prompting increased...
Modulating Dynamic Deprotonation Evolution via Sacrificial Solvation Structure to Mitigate Zinc Electrochemical Corrosion and Cathodic Structure Deterioration for High‐Stable Zinc‐Vanadium Batteries
24/06/2025 - To mitigate proton‐induced side reactions, a lean‐water polymer electrolyte with distinctive sacrificial solvation structure is developed to suppressing zinc chemical self‐discharge corrosion...
RETRACTION: A Novel pH‐Responsive Nanoniosomal Emulsion for Sustained Release of Curcumin from a Chitosan‐Based Nanocarrier: Emphasis on the Concurrent Improvement of Loading, Sustained Release, and Apoptosis Induction
25/06/2025 - RETRACTION: S. Haseli, M. Pourmadadi, A. Samadi, F. Yazdian, M. Abdouss, H. Rashedi, and M. Navaei‐Nigjeh, “A Novel pH‐Responsive Nanoniosomal Emulsion for Sustained Release of Curcumin from a...
Scalable Low‐Carbon Ambient‐Dried Foam‐Like Aerogels for Radiative Cooling with Extreme Environmental Resistance
19/06/2025 - A scalable low‐carbon ambient‐dried foam‐like aerogel with integrated radiative cooling and fire/harsh‐conditions resistance is fabricated via green ambient‐drying process without complex...
Improvement of the Antimicrobial Peptide Activity by Means of Chitosan‐Based Nanoparticles
22/06/2025 - Graphical Abstract and Lay SummaryThis study demonstrated the enhancement of the bioactivity of two different antimicrobial peptides (AMPs), Cm‐p1 and Lip1, against Botrytis cinerea by...
All‐Dielectric Ultra‐Broadband Microwave Absorbing Aerogel with Optimized Dielectric Dispersion via Dielectric Relaxation Time Regulation
16/06/2025 - By incorporating fluorinated graphene into MXene aerogels, hydrogen bonding, and interfacial charge separation extend the dielectric relaxation time, enabling ultrathin (2.54 mm), lightweight (34.4...
Enhancing Biohydrogen Yields: A Comparative Study of Individual and Combined Biomass Pretreatment Techniques
- Biohydrogen production from various biomass sources using combined pretreatment methods is an emerging and cost-effective alternative energy technology. To enhance hydrogen production, a batch...
Characterization of Novel Pullulanase Type I from Newly Isolated Bacillus cereus Strain NP9: Potential Additive for Laundry Detergent Formulations
- This study aimed to produce a pullulanase that can be utilized as an additive in detergent formulations. A newly isolated Bacillus cereus strain NP9 exhibited the highest pullulanase...
Direct‐Ink‐Writing Printed Aerogels with Dynamically Reversible Thermal Management and Tunable Electromagnetic Interference Shielding
12/06/2025 - Honeycomb‐structured (Ti3C2Tx/Fe3O4/CCMC)–(AgNW/CCMC) aerogels with tunable EMI shielding performance up to 80 dB are fabricated via DIW 3D printing, achieving compression‐driven shielding...
On‐the‐Fly Synthesis of Freestanding Spin‐Crossover Architectures With Tunable Magnetic Properties
13/06/2025 - 3D flow‐focusing devices are an ideal platform for the processing and integration of functional materials within polymeric matrices. In this article, A. Tuan Ngo, D. Aguilà, T. Sotto Mayor, M....
From Physical Cross‐Linking to Tailored Phosphorylation: Unlocking High‐Performance and Biocompatible Xanthan‐Konjac Hydrogels for Zinc‐Ion Batteries
11/06/2025 - Phos‐XK, a novel hydrogel electrolyte, is crafted from xanthan gum and konjac gum through physical crosslinking and targeted phosphorylation. This design balances mechanical strength and ionic...
Eco‐Friendly Biopolymers: Eco‐Friendly Biopolymers: Converting Waste Cooking Oil Into Simultaneous Production of Two Valuable Polyhydroxyalkanoates and Bacterial Alginate Through Microbial Conversion
11/06/2025 - Simultaneous production of PHAs and bacterial alginate by Pseudomonas mendocina PSU from waste cooking oil, generating diverse PHA monomers and alginate precursors.ABSTRACTAn obstacle to the...