Envase

Envase

ISO/TS 10839:2022 - Polyethylene pipes and fittings for the supply of gaseous fuels — Code of practice for design, handling and installation
- This document presents a code of practice dealing with polyethylene (PE) pipes and fittings for buried pipeline systems outside buildings, conforming to the ISO 4437 series, and designed to...
ISO 11997-3:2022 - Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 3: Testing of coating systems on materials and components in automotive construction
- This document specifies a method based on a cyclic corrosion test for testing the corrosion protection of automobiles using coating systems on aluminium, steel or galvanized steel.The...
ISO 1133-1:2022 - Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics — Part 1: Standard method
- This document specifies two procedures for the determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastic materials under specified conditions of...
ISO 15750-3:2022 - Packaging — Steel drums — Part 3: Inserted flange-type closure systems
- This document specifies the characteristics, dimensions and finish of the inserted flange-type closure systems used for steel drums.
ISO 16495:2022 - Packaging — Transport packaging for dangerous goods — Test methods
- This document specifies the information needed for the design type testing of packaging, intermediate bulk containers (IBCs) and large packaging intended for use in the transport of dangerous...
ISO/TR 14055-2:2022 - Environmental management — Guidelines for establishing good practices for combatting land degradation and desertification — Part 2: Regional case studies
- This document provides regional case studies of good practices in land management to prevent or minimize land degradation and desertification in support of ISO 14055-1:2017.The case...
ISO 21368:2022 - Adhesives — Guidelines for the fabrication of adhesively bonded structures and reporting procedures suitable for the risk evaluation of such structures
- This document provides guidelines describing the adhesive bonding quality requirements suitable for use by adhesive user-companies utilizing adhesive bonding as a means of fabrication. In...
ISO/TS 22984:2021 - Transport packaging — Cleaning and sanitation methods of reusable transport items for distribution purpose
- This document provides guidelines for the cleaning and sanitation procedures for the sanitary operation of reusable transport packaging, which are used in the fields of handling, transport,...
ISO 6691:2021 - Thermoplastic polymers for plain bearings — Classification and designation
- This document specifies a classification and designation system for a selection of the most common unfilled thermoplastic polymers for plain bearings.The unfilled thermoplastic polymers...
D880 Standard Test Method for Impact Testing for Shipping Containers and Systems has been reapproved, available as D880-92(2021)
18/11/2021 - Significance and Use 5.1 The impact test has been found useful in laboratory simulation of impacts such as those encountered in manual and mechanical handling and...
D4168 Standard Test Methods for Transmitted Shock Characteristics of Foam-in-Place Cushioning Materials has been reapproved, available as D4168-95(2021)
18/11/2021 - Significance and Use 5.1 Data obtained by these methods may be used to determine the transmitted shock cushioning characteristics of foam-in-place packaging materials. These...
D6537 Standard Practice for Instrumented Package Shock Testing For Determination of Package Performance has been reapproved, available as D6537-00(2021)
18/11/2021 - Significance and Use 4.1 This practice is intended to provide the user with a process to obtain data on package performance when a packaged product is subjected to shock. These...
D6653/D6653M Standard Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method has been reapproved, available as D6653/D6653M-13(2021)
18/11/2021 - Significance and Use 4.1 Packaged products transported by meansn of the feeder aircraft network are liable to experience altitudes as high as 5 791 m [19 000 ft].4 When exposed...
ISO 248-1:2021 - Rubber, raw — Determination of volatile-matter content — Part 1: Hot-mill method and oven method
01/06/2021 - This document specifies two methods for the determination of volatile-matter content in raw rubbers by using a hot mill or an oven.These methods are applicable to the determination of...
D1781 Standard Test Method for Climbing Drum Peel for Adhesives has been reapproved, available as D1781-98(2021)
- Significance and Use 5.1 This test method may be used to determine comparative rather than fundamental measurements of adhesion and is particularly suitable for process...
ISO 10106:2021 - Cork stoppers — Determination of global migration
01/06/2021 - This document specifies a test method to measure the global migration of cork stoppers.It is applicable to all types of cork stoppers that are ready to use, simulating the real...
ISO 6452:2021 - Rubber- or plastics-coated fabrics — Determination of fogging characteristics of trim materials in the interior of automobiles
01/05/2021 - This document specifies a test method which is intended to determine the fogging characteristics of rubber- or plastics-coated fabrics that are used as trim materials in the interior of motor...
D4783 Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi has been reapproved, available as D4783-01(2021)
- Significance and Use 5.1 These test methods are used to demonstrate whether an adhesive preparation is sufficiently protected with biocide to resist attack by bacteria, yeast,...
ISO 22982-1:2021 - Transport packaging — Temperature-controlled transport packages for parcel shipping — Part 1: General requirements
01/03/2021 - This document specifies the general requirements of transport packaging, especially the containers, which are formed or prepared for the temperature-controlled transport services of parcel...
D228/D228M Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing has been revised to D228/D228M-21
- Significance and Use 4.1 These test methods include procedures for sampling, examination, physical testing, and analyses of asphalt roll roofing, cap sheets, and shingles used...