Envase

Envase

ISO/TS 22984:2021 - Transport packaging — Cleaning and sanitation methods of reusable transport items for distribution purpose
- This document provides guidelines for the cleaning and sanitation procedures for the sanitary operation of reusable transport packaging, which are used in the fields of handling, transport,...
ISO 6691:2021 - Thermoplastic polymers for plain bearings — Classification and designation
- This document specifies a classification and designation system for a selection of the most common unfilled thermoplastic polymers for plain bearings.The unfilled thermoplastic polymers...
D880 Standard Test Method for Impact Testing for Shipping Containers and Systems has been reapproved, available as D880-92(2021)
18/11/2021 - Significance and Use 5.1 The impact test has been found useful in laboratory simulation of impacts such as those encountered in manual and mechanical handling and...
D4168 Standard Test Methods for Transmitted Shock Characteristics of Foam-in-Place Cushioning Materials has been reapproved, available as D4168-95(2021)
18/11/2021 - Significance and Use 5.1 Data obtained by these methods may be used to determine the transmitted shock cushioning characteristics of foam-in-place packaging materials. These...
D6537 Standard Practice for Instrumented Package Shock Testing For Determination of Package Performance has been reapproved, available as D6537-00(2021)
18/11/2021 - Significance and Use 4.1 This practice is intended to provide the user with a process to obtain data on package performance when a packaged product is subjected to shock. These...
D6653/D6653M Standard Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method has been reapproved, available as D6653/D6653M-13(2021)
18/11/2021 - Significance and Use 4.1 Packaged products transported by meansn of the feeder aircraft network are liable to experience altitudes as high as 5 791 m [19 000 ft].4 When exposed...
ISO 248-1:2021 - Rubber, raw — Determination of volatile-matter content — Part 1: Hot-mill method and oven method
01/06/2021 - This document specifies two methods for the determination of volatile-matter content in raw rubbers by using a hot mill or an oven.These methods are applicable to the determination of...
D1781 Standard Test Method for Climbing Drum Peel for Adhesives has been reapproved, available as D1781-98(2021)
- Significance and Use 5.1 This test method may be used to determine comparative rather than fundamental measurements of adhesion and is particularly suitable for process...
ISO 10106:2021 - Cork stoppers — Determination of global migration
01/06/2021 - This document specifies a test method to measure the global migration of cork stoppers.It is applicable to all types of cork stoppers that are ready to use, simulating the real...
ISO 6452:2021 - Rubber- or plastics-coated fabrics — Determination of fogging characteristics of trim materials in the interior of automobiles
01/05/2021 - This document specifies a test method which is intended to determine the fogging characteristics of rubber- or plastics-coated fabrics that are used as trim materials in the interior of motor...
D4783 Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi has been reapproved, available as D4783-01(2021)
- Significance and Use 5.1 These test methods are used to demonstrate whether an adhesive preparation is sufficiently protected with biocide to resist attack by bacteria, yeast,...
ISO 22982-1:2021 - Transport packaging — Temperature-controlled transport packages for parcel shipping — Part 1: General requirements
01/03/2021 - This document specifies the general requirements of transport packaging, especially the containers, which are formed or prepared for the temperature-controlled transport services of parcel...
D228/D228M Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing has been revised to D228/D228M-21
- Significance and Use 4.1 These test methods include procedures for sampling, examination, physical testing, and analyses of asphalt roll roofing, cap sheets, and shingles used...
D5639/D5639M Standard Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements has been revised to D5639/D5639M-20
- Significance and Use 4.1 This practice assists users in selecting appropriate performance characteristics of corrugated fiberboard or box construction, or both, commensurate...
D5833 Standard Guide for Source Reduction Reuse, Recycling, or Disposal of Steel Cans has been reapproved, available as D5833-12(2020)
- Significance and Use 4.1 This guide will familiarize public officials and business and industry managers with source reduction, reuse, recycling, or disposal of steel...
D6254/D6254M Standard Specification for Wirebound Pallet-Type Wood Boxes has been revised to D6254/D6254M-20
- Abstract This specification covers the fabrication of new fully enclosed wire bound pallet-type wooden boxes intended for use as containers for domestic and overseas...
D642 Standard Test Method for Determining Compressive Resistance of Shipping Containers, Components, and Unit Loads has been revised to D642-20
- Significance and Use 4.1 Compressive resistance is one of the properties used to evaluate the ability of shipping containers, components, and unit loads to successfully...
D6573/D6573M Standard Specification for General Purpose Wirebound Shipping Boxes has been reapproved, available as D6573/D6573M-13(2020)
- Abstract This specification covers the fabrication of new wire-bound general purpose panelboard shipping boxes for use as containers for domestic and overseas shipment of...
D6590/D6590M Standard Specification for Pressure-Sensitive Tape for Sealing Fiber Containers and Cans has been reapproved, available as D6590/D6590M-00(2020)
- Abstract This specification covers one type of pressure-sensitive tape for closing and sealing slip cover type containers such as fiber tubes and metal cans. The polyester...
D6881/D6881M Standard Classification for Standard Plastics Industry Bulk Box/Pallet Unit Size Classified By Bulk Density has been reapproved, available as D6881/D6881M-03(2020)
- Significance and Use 4.1 This standard classification will be used to: 4.1.1 Standardize the package size increasing availability, versatility, and...