Automoción
Automoción
Optimizing Post Friction Stir Welding Heat Treatment in Dissimilar Friction Stir Welded 6061/AlSi10MgMn Joints for Electrical Vehicle Battery Housing
04/03/2026 -
Microstructural evolution and hardness optimization along the cross‐section of friction stir welded AA6061/AlSi10MgMn joints, for electric vehicle battery housings, were investigated. Postweld...
3D‐Printed Giant Magnetoresistive (GMR) Sensors Based on Self Compliant Springs
01/03/2026 -
This work explores 3D‐printed GMR sensors utilizing self‐compliant spring structures and conductive PLA composites. By optimizing arm width, we achieved high piezoresistive (0.34%/mm) and...
Effects of Carbon Nanoparticles on Triboelectro‐Induced Surface Defects
08/02/2026 -
Carbon nanoparticles added to grease modify the electrocontact behavior. The synergy of particle concentration and electric current dominates the surface damage of metals in contact.Electrical...
Scalable Growth of Quasi‐1D TiS3 Nanoribbons for High‐Temperature Flexible Strain Sensor
03/02/2026 -
Ethanol‐assisted chemical vapor deposition produces vertically aligned TiS3 nanoribbons (NRs) with controllable aspect ratios, facilitating easy transfer. These TiS3 NRs maintain high conductivity...
Frontal Polymerization‐Enabled 3D Printing of Recyclable High‐Performance Carbon Fiber Reinforced Polymers (Adv. Mater. 7/2026)
02/02/2026 -
Frontal Polymerization‐Enabled 3D PrintingThis work integrates frontal polymerization with 3D printing to overcome the industry bottlenecks of support‐free printing and rapid curing for carbon...
Tuning Mechanical Properties of 3D Graphene Nanostructures via Hollow Gyroid Geometry
29/01/2026 -
This study demonstrates that hollow diameter, temperature, and strain rate critically control the mechanical response of 3D graphene gyroid nanostructures. Increasing the hollow diameter promotes...
Single‐Site‐Directed Unidirectional Epitaxy of Large‐Scale 2D Materials
24/01/2026 -
This work presents an effective strategy for unidirectional epitaxial growth of 2D materials by creating single active sites on flat terraces. Using MoSe2/Au(111) as a model system, we combine MBE...
Sub‐5‐Min Ultrafast Growth of Millimeter‐Scale‐Length Tellurium Nanowires With Broadband Bulk Photovoltaic Response
24/01/2026 -
This study demonstrates a self‐limiting diffusion strategy to rapidly grow ultralong Te single‐crystal nanowires with uniform non‐centrosymmetric spiral chain structure. The fabricated Te...
Synergistic mechanisms and clinical translation of regorafenib combination therapies
13/01/2026 -
This paper presents a novel reliability evaluation method that integrates accelerated life testing (ALT) with imprecise probabilistic techniques to address the challenges of uncertainty in life...
Can Ti‐Based MXenes Serve as Solid Lubricants for Brake Applications? A Tribological Study
05/01/2026 -
This study explores the first implementation of Ti‐based MXenes materials in brake pad friction composite material. The resulting composite material exhibits a 48% reduction in the wear rate;...
In Vivo Generation and Manipulation of CAR‐T‐mimicking Cells via Magnetic Bispecific Nano‐antibody for Solid Tumor Therapy
06/01/2026 -
This study develops a magnetic bispecific nano‐antibody (M‐BiNanoAb) that can be administered in vivo to engineer circulating T cells into CAR‐T‐mimicking cells. Under external magnetic field...
van der Waals Lamination for Integrating Metal Halide in Perovskite Optoelectronic Devices
07/01/2026 -
Metal halide perovskites are promising for optoelectronics, yet incompatible with conventional processing for device fabrication. This review highlights van der Waals (vdW) lamination as a...
