Automoción
Automoción
Optimization Strategies of Hybrid Lithium Titanate Oxide/Carbon Anodes for Lithium-Ion Batteries
09/11/2024 -
Lithium-ion batteries, due to their high energy density, compact size, long lifetime, and low environmental impact, have achieved a dominant position in everyday life. These attributes have made them...
Research Progress on Solid-State Electrolytes in Solid-State Lithium Batteries: Classification, Ionic Conductive Mechanism, Interfacial Challenges
05/11/2024 -
Solid-state lithium batteries exhibit high-energy density and exceptional safety performance, thereby enabling an extended driving range for electric vehicles in the future. Solid-state electrolytes...
Sustainable Grease Lubrication Induced by Graphene Oxide and LiFePO4
29/10/2024 -
This research investigates the possibility of modifying greases by 2D graphene oxide and lithium iron phosphate (LiFePO4) to enhance the resulting tribological performance. The combination of both...
Analysis of Tribological Properties of Engine Lubricants Used in Hybrid Vehicles
31/10/2024 -
A problem has been noted regarding the admixture of fuel to a low viscosity lubricant in hybrid electric vehicles (HEVs). This is very detrimental to the wear and tear of engine operating components....
Electrical and Dielectrical Properties of Composites Based on Alumina and Cyclic Olefin Copolymers
31/10/2024 -
Understanding the performance of polymer dielectrics at different temperatures is becoming increasingly important due to the rapid development of electric cars, electromagnetic devices, and new...
Unveiling BaTiO3-SrTiO3 as Anodes for Highly Efficient and Stable Lithium-Ion Batteries
29/10/2024 -
Amidst the swift expansion of the electric vehicle industry, the imperative for alternative battery technologies that balance economic feasibility with sustainability has reached unprecedented...
Boron nitride: The key material in polymer composites for electromobility
15/10/2024 -
Boron nitride in polymer composites optimizes thermal management in ePowertrains, leading to enhanced electric vehicle performance.Despite the continuous development and improvement of many...
Dual?Seed Strategy for High?Performance Anode?Less All?Solid?State Batteries
10/10/2024 -
The anode?less all?solid?state battery system reported here operates at room temperature by employing dual seeds in the anode protection layer. Lithiophilic silver (Ag) and zinc oxide (ZnO)...
High performance Calcium Copper Titanate/Polyimide dielectrics composites enabled through colloidal stabilization
13/10/2024 -
The use of colloidally stabilizing additives produces a high performance dielectric composite which shows remarkable improvement at elevated temperatures.Transition to electrified transportation...
Thermal expansion behavior of nitrogen-processed Al6061/SiC composites
07/10/2024 -
Abstract Developing of lightweight materials with extremely low thermal expansion is crucial across various sectors. While Invar exhibits a coefficient of thermal expansion (CTE)...
Development of Supervisory Self-Learning-Based Energy Management Controller to Control the Torque Ripples of Brushless DC Motor in Electric Vehicles Applications
01/12/2024 -
Abstract The BLDC motor is becoming more popular in electric vehicles than other motors because of its high torque, robust control, etc. Antithetically, it is more challenging...
Sustainable Thermoplastic Material Selection for Hybrid Vehicle Battery Packs in the Automotive Industry: A Comparative Multi-Criteria Decision-Making Approach
30/09/2024 -
This research study employs a comparative Multi-Criteria Decision-Making (MCDM) approach to select optimal thermoplastic materials for hybrid vehicle battery packs in the automotive industry,...
Unveiling the Multifunctional Carbon Fiber Structural Battery
10/09/2024 -
Multifunctional structural batteries are set to revolutionize transportation by enhancing vehicle driving range and reducing energy consumption. This study demonstrates a fully functional structural...
Ionic?liquid?supported magnetic nanoparticles: synthesis, characterization, and their use for the separation of Co and Ni from Li in aqueous solutions
04/07/2024 -
The evolution of the electric vehicle market and the ongoing demand for lithium (Li), cobalt (Co) and nickel (Ni) for batteries production requires secondary sources for obtaining these elements. The...
A raising alarm on the current global electronic waste situation through bibliometric analysis, life cycle, and techno-economic assessment: a review
31/05/2024 -
Electronic waste (E-waste) production worldwide is increasing three times faster than the growth of the global population, and it is predicted that the total volume of E-waste will reach 74...
Numerical Simulation of a Thermal Management System Using Composite Flame-Retardant Resin and Its Effect on Battery Life Span
28/04/2024 -
One of the obstacles to the adoption of electric vehicles as a future pollution-free transport solution is that the energy sources (batteries) have not yet become sustainable through a long-life span...
Comminution of Metal–Polymer Composites for Recycling
18/04/2024 -
Plates of polymers were ground in a hammer mill with different pretreatments. With the results, it is possible to create a better understanding of the comminution of polymers and transfer the results...
Tailoring the Properties of Gel Polymer Electrolytes for Sodium?Ion Batteries Using Ionic Liquids: A Review
24/04/2024 -
The review paper features the use of ionic liquids in tuning the properties of gel polymer electrolytes for sodium?ion batteries. We aim to give the readers some general context of the structure and...
Tribological Performance of a Paraffinic Base Oil Additive with Coated and Uncoated SiO2 Nanoparticles
25/04/2024 -
Electric vehicles (EVs) have emerged as a technology that can replace internal combustion vehicles and reduce greenhouse gas emissions. Therefore, it is necessary to develop novel low-viscosity...
Implementations of Digital Transformation and Digital Twins: Exploring the Factory of the Future
14/04/2024 -
In the era of rapid technological advancement and evolving industrial landscapes, embracing the concept of the factory of the future (FoF) is crucial for companies seeking to optimize efficiency,...
An EV SRM Drive and Its Interconnected Operations Integrated into Grid, Microgrid, and Vehicle
04/04/2024 -
This paper presents an electric vehicle (EV) switched reluctance motor (SRM) drive with incorporated operation capabilities integrated into the utility grid, the microgrid, and another EV. The motor...
