Industria 4.0
Industria 4.0
Frontal Polymerization‐Enabled 3D Printing of Recyclable High‐Performance Carbon Fiber Reinforced Polymers (Adv. Mater. 7/2026)
02/02/2026 -
Frontal Polymerization‐Enabled 3D PrintingThis work integrates frontal polymerization with 3D printing to overcome the industry bottlenecks of support‐free printing and rapid curing for carbon...
Hierarchical Deformation Mechanisms and Energy Absorption in Thin‐Walled Lattice Composite Structures
31/01/2026 -
This study demonstrates the effectiveness of structured thin‐walled lattice composites (TWLCs) in enhancing mechanical performance and energy absorption (EA) capabilities. Compared to monolithic...
Gradient Design Enhances Energy Absorption of 3D‐Printed Bio‐Inspired Functionally Graded Honeycombs
31/01/2026 -
This study designs a novel 3D‐printed, bio‐inspired functionally graded honeycomb (FGH) for superior bending energy absorption. Combining experiments and simulations, it reveals how the gradient...
Laser Metal Deposition of Aluminum Alloys 7075 and 5083 with the Addition of Volatile Alloying Elements through Powder Blending
31/01/2026 -
This study investigates laser metal deposition of aluminum alloys EN AW‐7075 and EN AW‐5083, using powder blending to compensate zinc and magnesium evaporation. In situ alloying and ex situ...
Signal Modulation of a 3D Printer for Direct Laser Patterning of Durable and Reusable Copper Electrodes
29/01/2026 -
A low‐cost hardware modification enables high‐frequency 50 kHz laser direct patterning (LDP) on an accessible 3D‐printer platform, overcoming the 0.5 kHz firmware lock. This breakthrough...
Holographic Whole‐Object Photopolymerization Preserving Director Alignment in Liquid Crystalline Actuators
29/01/2026 -
Holographic microlithography enables the fabrication of fully connected 3D liquid crystalline structures in a single exposure. The process maintains precise control over the director orientation...
Vat Photopolymerization Additive Manufacturing for Advanced Ceramics: Techniques, Multimaterial Strategies, and Applications
28/01/2026 -
This article systematically reviews recent advances in vat photopolymerization additive manufacturing (VPP‐AM) technology for single‐material and multimaterial ceramic fabrication. It discusses...
An Inkjet‐Printed Platinum‐Based Temperature Sensing Element on Polyimide Substrates
28/01/2026 -
An inkjet‐printed, meander‐structured, nanoparticle platinum‐based resistive temperature sensors on polyimide substrates are demonstrated as proof‐of‐concept. Optimized sintering at 250°C...
Multimodal Mechanical Testing of Additively Manufactured Ti6Al4V Lattice Structures: Compression, Bending, and Fatigue
28/01/2026 -
In this experimental study, the mechanical properties of additively manufactured Ti‐6Al‐4V lattice structures of different geometries are characterized using compression, four point bending and...
Melt‐Based Embedded Printing of Macroscopically‐Conformal, Electro‐Conductive and Elastomeric Patches for Improved Myocardial Infarction Repair
28/01/2026 -
A melt‐based embedded 3D printing platform is presented that solves the challenge of printing thermosetting elastomers, enabling direct fabrication of conductive, elastic poly(glycerol sebacate)...
Turn Nonweldable Ni‐Superalloys Printable and Microstructurally Controllable
22/01/2026 -
This review examines nonweldable Nibased superalloys fabricated by additive manufacturing, highlighting crack‐initiation mechanisms and mitigation strategies, melt pool dynamics governed...
High-resolution 3D-printed insulator-based dielectrophoresis devices for biomolecular manipulation
-
The advancement of microfluidics has enabled a wide range of biochemical and biological applications, such as high-throughput drug testing or point-of-care diagnostics, and has also enabled...
Interpreting the effect of critical control settings on the quality metrics of thermoplastic polyimide in extrusion based additive manufacturing
27/01/2026 -
AI-driven technologies are reshaping the higher education landscape, particularly in assessment design and setting, execution, grading, evaluation, and feedback, in the field of management...
High‐Strength Joints on Glass and Aluminum Alloys Through Microstructure Surfaces at Low Temperature
18/01/2026 -
In this study, micronano structures are fabricated on the surface of glass/aluminum alloy using a femtosecond laser, combined with low‐temperature silver paste sintering (180–250 °C), to...
Engineering Deformation and Failure in Diamond Triply Periodic Minimal Surface Lattices via 3D Wall‐Thickness Grading
17/01/2026 -
The work demonstrates that strategic wall‐thickness grading in diamond triply periodic minimal surface lattices enables precise tuning of deformation and failure behavior under compression....
