Automoción
Automoción
Effects of Carbon Nanoparticles on Triboelectro‐Induced Surface Defects
08/02/2026 -
Carbon nanoparticles added to grease modify the electrocontact behavior. The synergy of particle concentration and electric current dominates the surface damage of metals in contact.Electrical...
Network‐Driven Ion Transport in Robust In Situ Polymerized Electrolyte‐Integrated Cathodes for Long‐Life Structural Batteries in Intelligent Sensing Platforms
02/11/2025 -
This study unveils a previously unexplored network‐enhanced ionic transport mechanism, where the poly(E2BADMA) chains in in situ polymerized solid‐state electrolytes not only enhance mechanical...
Lightweight, Flexible Electromagnetic Shielding Composite Films Reinforced with Recycled Carbon Fibers and Carbon Nanofillers
29/09/2025 -
This work investigates ultra‐high molecular weight polyethylene composite films reinforced with recycled carbon fibers and carbon‐based nanofillers including graphene nanoplatelets and carbon...
Toward Maximum Utilization of Heavy Rare Earths in Sintered Nd–Fe–B Magnets by Grain Boundary Diffusion Source and Application Area Optimization
26/09/2025 -
In this work, the grain boundary diffusion process is optimized to maximize heavy rare earth utilization by strategic magnetic hardening of areas in the magnet such as corners or edges that are...
Advanced Thermal Interface Materials: Insights into Low‐Temperature Sintering and High Thermal Conductivity of MgO
27/08/2025 -
MgO has emerged as a promising candidate for improving thermal management in battery systems owing to its high thermal conductivity. In this study, it is demonstrate that the thermal conductivity of...
MXene‐Assisted Rapid Gelation and Foaming of Gradient Hydrogel as Human‐Machine Interfaces with Regulated Charge Accumulation/Dissipation and Enhanced Tactile Sensing Capability
18/08/2025 -
An innovative strategy is proposed to improve the performance of hydrogel‐based tactile sensors through manipulating the interfacial properties and ion transport kinetics rather than barely...
Microstructural Evolution Dynamics in Rapid Joule Heating Densification of High‐Nickel Cathodes
04/08/2025 -
Introduction of high‐temperature rapid Joule heating combined with two‐step sintering drives full densification while suppressing grain coarsening in high‐Ni cathodes. By activating lattice and...
Ultralight and Elastic Polyimide Microtube Aerogel via Airflow‐Induced Spinning
27/05/2025 -
This paper reports the one‐step preparation of ultralight polyimide microtube aerogel sponges (PMAS) using airflow‐induced spinning. PMAS has ultralow density, excellent thermal insulation...
Uni‐Axial Densification of Slurry‐Casted Li₆PS₅Cl Tapes: The Role of Particle Size Distribution and Densification Pressure
19/05/2025 -
Solid‐state batteries promise high energy density and safety for electric vehicles. This study examines the densification of slurry‐casted Li₆PS₅Cl separator tapes, highlighting the role of...
Boosting Leaching of Spent Ternary Cathode via Strong Van Der Waals Force Beyond Hydrogen Bonding
31/03/2025 -
In this work, a novel design strategy is proposed by strengthening the van der Waals forces in the nanostructure of DESs, which significantly enhances the reducibility of DESs components. Benefiting...
Optimization Strategies of Hybrid Lithium Titanate Oxide/Carbon Anodes for Lithium-Ion Batteries
09/11/2024 -
Lithium-ion batteries, due to their high energy density, compact size, long lifetime, and low environmental impact, have achieved a dominant position in everyday life. These attributes have made them...
Research Progress on Solid-State Electrolytes in Solid-State Lithium Batteries: Classification, Ionic Conductive Mechanism, Interfacial Challenges
05/11/2024 -
Solid-state lithium batteries exhibit high-energy density and exceptional safety performance, thereby enabling an extended driving range for electric vehicles in the future. Solid-state electrolytes...
Sustainable Grease Lubrication Induced by Graphene Oxide and LiFePO4
29/10/2024 -
This research investigates the possibility of modifying greases by 2D graphene oxide and lithium iron phosphate (LiFePO4) to enhance the resulting tribological performance. The combination of both...
Analysis of Tribological Properties of Engine Lubricants Used in Hybrid Vehicles
31/10/2024 -
A problem has been noted regarding the admixture of fuel to a low viscosity lubricant in hybrid electric vehicles (HEVs). This is very detrimental to the wear and tear of engine operating components....
Electrical and Dielectrical Properties of Composites Based on Alumina and Cyclic Olefin Copolymers
31/10/2024 -
Understanding the performance of polymer dielectrics at different temperatures is becoming increasingly important due to the rapid development of electric cars, electromagnetic devices, and new...
Unveiling BaTiO3-SrTiO3 as Anodes for Highly Efficient and Stable Lithium-Ion Batteries
29/10/2024 -
Amidst the swift expansion of the electric vehicle industry, the imperative for alternative battery technologies that balance economic feasibility with sustainability has reached unprecedented...
Boron nitride: The key material in polymer composites for electromobility
15/10/2024 -
Boron nitride in polymer composites optimizes thermal management in ePowertrains, leading to enhanced electric vehicle performance.Despite the continuous development and improvement of many...
Dual?Seed Strategy for High?Performance Anode?Less All?Solid?State Batteries
10/10/2024 -
The anode?less all?solid?state battery system reported here operates at room temperature by employing dual seeds in the anode protection layer. Lithiophilic silver (Ag) and zinc oxide (ZnO)...
High performance Calcium Copper Titanate/Polyimide dielectrics composites enabled through colloidal stabilization
13/10/2024 -
The use of colloidally stabilizing additives produces a high performance dielectric composite which shows remarkable improvement at elevated temperatures.Transition to electrified transportation...
Thermal expansion behavior of nitrogen-processed Al6061/SiC composites
07/10/2024 -
Abstract Developing of lightweight materials with extremely low thermal expansion is crucial across various sectors. While Invar exhibits a coefficient of thermal expansion (CTE)...
Development of Supervisory Self-Learning-Based Energy Management Controller to Control the Torque Ripples of Brushless DC Motor in Electric Vehicles Applications
01/12/2024 -
Abstract The BLDC motor is becoming more popular in electric vehicles than other motors because of its high torque, robust control, etc. Antithetically, it is more challenging...
