Economía Circular

Economía Circular

D1766 Standard Test Method for Rubber Chemicalsâ??Solubility has been reapproved, available as D1766-05(2021)
18/11/2021 - Significance and Use 4.1 This test method may be used as a raw material quality-control tool. 1. Scope 1.1 This test...
D2702 Standard Practice for Rubber Chemicalsâ??Determination of Infrared Absorption Characteristics has been reapproved, available as D2702-05(2021)
18/11/2021 - Significance and Use 5.1 This procedure can be used for a variety of applications, including identifying unlabeled material, process control, raw material acceptance, product...
D3156 Standard Practice for Rubberâ??Chromatographic Analysis of Antidegradants (Antioxidants, Antiozonants and Stabilizers) has been reapproved, available as D3156-96(2021)
18/11/2021 - Significance and Use 4.1 This practice is useful for the examination of rubber compounds or products for the presence of chemicals that prevent or greatly reduce degradation...
D3182 Standard Practice for Rubberâ??Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets has been revised to D3182-21a
18/11/2021 - Significance and Use 3.1 This practice shall be used for specific procedures used in preparing rubber compounds for quality control of production, for research and development...
D4571 Standard Test Methods for Rubber Compounding Materialsâ??Determination of Volatile Material has been revised to D4571-21
18/11/2021 - Significance and Use 5.1 These test methods are suitable for the determination of volatile material in rubber compounding materials. The test methods may be used for quality...
D880 Standard Test Method for Impact Testing for Shipping Containers and Systems has been reapproved, available as D880-92(2021)
18/11/2021 - Significance and Use 5.1 The impact test has been found useful in laboratory simulation of impacts such as those encountered in manual and mechanical handling and...
D1596 Standard Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material has been reapproved, available as D1596-14(2021)
18/11/2021 - Significance and Use 5.1 Dynamic cushioning test data obtained by this test method are applicable to the cushioning material and not necessarily the same as obtained in a...
D2221 Standard Test Method for Creep Properties of Package Cushioning Materials has been reapproved, available as D2221-01(2021)
18/11/2021 - Significance and Use 5.1 This test method determines the extent and nature of cushion thickness change under static load. Creep data obtained by this test method are applicable...
D4168 Standard Test Methods for Transmitted Shock Characteristics of Foam-in-Place Cushioning Materials has been reapproved, available as D4168-95(2021)
18/11/2021 - Significance and Use 5.1 Data obtained by these methods may be used to determine the transmitted shock cushioning characteristics of foam-in-place packaging materials. These...
D5077 Standard Terminology Relating to Electrostatic Discharge (ESD) Packaging Materials has been reapproved, available as D5077-90(2021)
18/11/2021 - 1. Scope 1.1 The terms and definitions in this standard are related to Electrostatic Discharge (ESD) Packaging Materials and ESD Protective Materials. ...
D6537 Standard Practice for Instrumented Package Shock Testing For Determination of Package Performance has been reapproved, available as D6537-00(2021)
18/11/2021 - Significance and Use 4.1 This practice is intended to provide the user with a process to obtain data on package performance when a packaged product is subjected to shock. These...
D6653/D6653M Standard Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method has been reapproved, available as D6653/D6653M-13(2021)
18/11/2021 - Significance and Use 4.1 Packaged products transported by meansn of the feeder aircraft network are liable to experience altitudes as high as 5 791 m [19 000 ft].4 When exposed...
D8410 Standard Specification for Evaluation of Cellulosic-Fiber-Based Packaging Materials and Products for Compostability in Municipal or Industrial Aerobic Composting Facilities is a new standard now available. D8410-21
18/11/2021 - 1. Scope 1.1 This specification covers cellulosic-fiber-based packaging materials and products associated with food, landscape waste, and other compost feedstocks,...
D7281 Standard Test Method for Determining Water Migration Resistance Through Roof Membranes has been reapproved, available as D7281-07(2021)
11/11/2021 - Significance and Use 5.1 This test method provides a means of evaluating roof membranes, seams, and laps for resistance to water migration from standing water on the roof. This...
F1673 Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems has been editorially changed, available as F1673-10(2021)e1
- Abstract This specification covers requirements for polyvinylidene drainage systems for corrosive applications. Requirements for material, pipe and fittings are included....
ISO 27126:2021 - Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals — Specification
01/11/2021 - This document specifies requirements for four types of thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for carrying hydrocarbons, solvents and chemicals. It specifies bore...
ISO/TS 19807-2:2021 - Nanotechnologies — Magnetic nanomaterials — Part 2: Specification of characteristics and measurement methods for nanostructured magnetic beads for nucleic acid extraction
01/10/2021 - This document specifies characteristics to be measured of magnetic beads in suspension and powder forms for nucleic acid extraction applications. This document deals with magnetic beads that...
F414 Standard Test Method for Energy Absorbed by a Tire When Deformed by Slow-Moving Plunger has been revised to F414-21
- Significance and Use 5.1 This test method establishes a standard procedure of test and provides data that can be related to tire strength, but does not measure tire performance...
D1693 Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics has been revised to D1693-21
- Significance and Use 5.1 This test method may be used for routine inspection purposes by subjecting a required number of specimens to the test conditions for a specified time...
D5419 Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures has been revised to D5419-21
- Significance and Use 5.1 This test method compares closures for ESCR. Suitable variables are: closure materials, closure designs, processes, applied torque, and stress-crack...