Otros
Otros
ISO 34257:2024 - Adhesives — Wood adhesives — Determination of tensile strength of lap joints at elevated temperature (WATT '91)
-
This document specifies a method for testing the strength of wood adhesives at 80 °C.NOTE The procedure described is based on a test developed in Germany known...
ISO 813-2:2024 - Rubber, vulcanized or thermoplastic — Determination of adhesion to a rigid substrate — Part 2: Adhesion of a soft thermoplastic elastomer layer
-
This document specifies a test method for assessing the peel strength of a thermoplastic elastomer (TPE) to a rigid substrate. It is mainly applicable to soft components in the Shore A hardness...
ISO 8057:2024 - Determination of galvanic corrosion rate for assembled forms of carbon fibre reinforced plastics (CFRPs) and protection-coated metal — Electrochemical tests in neutral sodium chloride solution
-
This document specifies the electrochemical test for determining galvanic corrosion rate of CFRPs and metal assemblies with protection-coating, subjected to the corrosive environment of...
ISO 23337:2024 - Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using the Improved Lambourn test machine
-
This document specifies a method for the determination of the resistance of rubber to abrasion using the Improved Lambourn test machine.The abrasion loss resulting from the slip caused...
ISO 9854-1:2023 - Thermoplastics pipes for the transport of fluids — Determination of Charpy impact properties — Part 1: General test method
-
This document specifies two general test methods, Method A and Method B, to be used for the determination of the impact properties of unnotched and notched specimens cut from thermoplastics...
ISO 7972:2023 - Adhesives — Absorption of water into an adhesive layer using an open-faced specimen and determination of shear strength by secondary bonding
-
This document specifies a method for the rapid permeation of water to an adhesive layer using a specimen with one side open, the secondary bonding of the specimens with the adhesive layer that...
ISO 527-4:2023 - Plastics — Determination of tensile properties — Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
-
This document specifies the test conditions for the determination of the tensile properties of isotropic and orthotropic fibre-reinforced plastic composites, based upon the general principles...
ISO 7784-2:2023 - Paints and varnishes — Determination of resistance to abrasion — Part 2: Method with abrasive rubber wheels and rotating test specimen
-
This document specifies a method for determining the resistance to abrasion of coatings, for which two loaded, freely rotatable but eccentrically arranged abrasive rubber wheels affect the...
ISO 7784-1:2023 - Paints and varnishes — Determination of resistance to abrasion — Part 1: Method with abrasive-paper covered wheels and rotating test specimen
-
This document specifies a method for determining the resistance to abrasion of coatings, for which two loaded, freely rotatable but eccentrically arranged abrasive-paper covered wheels affect...
ISO 20975-1:2023 - Fibre-reinforced plastic composites — Determination of laminate through-thickness properties — Part 1: Direct tension and compression tests
-
This document specifies methods for determining the through-thickness properties (i.e. strength, modulus of elasticity, Poisson’s ratio and strain-to-failure) of fibre-reinforced plastic...
ISO 4666-3:2022 - Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 3: Compression flexometer (constant-strain type)
-
ISO 4666-3:2016 specifies the flexometer test with constant-strain amplitude for the determination of the temperature rise and resistance to fatigue of vulcanized rubber. The flexometer...
ISO 19721:2022 - Plastics — Abrasion test method for artificial turfs using combined UV exposure and mechanical wear
-
This document specifies an abrasion test method for accelerated testing of artificial turfs for use in sports facilities.Combined exposure to simulated solar UV radiation and mechanical...
ISO 7784-3:2022 - Paints and varnishes — Determination of resistance to abrasion — Part 3: Method with abrasive-paper covered wheel and linearly reciprocating test specimen
-
This document specifies a method for determining the resistance to abrasion of coatings, for which a loaded, rigid abrasive-paper covered wheel affects the coating of the linearly reciprocating...
ISO 24338:2022 - Laminate floor coverings — Determination of abrasion resistance
-
This document specifies two methods (A and B) for measuring abrasion of laminate floor covering elements. The tests described measure the ability of the surface layer to resist abrasive...
ISO 527-4:2021 - Plastics — Determination of tensile properties — Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
-
This document specifies the test conditions for the determination of the tensile properties of isotropic and orthotropic fibre-reinforced plastic composites, based upon the general principles...
D2240 Standard Test Method for Rubber Propertyâ??Durometer Hardness has been reapproved, available as D2240-15(2021)
-
Significance and Use 4.1Â This test method is based on the penetration of a specific type of indentor when forced into the material under specified conditions. The indentation...
D4475 Standard Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By the Short-Beam Method has been revised to D4475-21
-
Significance and Use 5.1Â Apparent shear strength determined by this test method is useful for quality control and specification purposes. It is also applicable to research and...
