Otros
Otros
Optimizing the Friction Stir Process Parameters of the AZ31 Mg Alloy/YSZ‐Al2O3 Hybrid Surface Composite Using the Response Surface Methodology‐Based Artificial Bee Colony Algorithm
18/01/2025 -
The study optimizes friction stir process parameters for yttria‐stabilized zirconia (YSZ) and alumina (Al2O3)‐reinforced hybrid composites using the artificial bee colony algorithm (ABCA)....
A Novel Approach for Fabricating In Situ Aluminum Foam‐Filled Carbon Steel Tubes via Hot‐Dip Aluminizing
18/01/2025 -
The study investigates the quasistatic compression property of in situ aluminum foam‐filled carbon steel tubes prepared via hot‐dip aluminizing. It reveals that hot‐dip aluminizing enhances the...
Beyond Order: Perspectives on Leveraging Machine Learning for Disordered Materials
18/01/2025 -
This article explores how machine learning (ML) revolutionizes the study and design of disordered materials by uncovering hidden patterns, predicting properties, and optimizing multiscale structures....
Degradation Behavior and Mechanical Properties of Porous Biodegradable FeMnC Alloys Produced by Powder Metallurgy for Biomedical Applications
18/01/2025 -
Biodegradable implants are transforming medicine by removing the need for secondary surgeries for implant removal. This study investigates FeMnC alloys, produced via pressing and sintering...
Hybrid Soft Segments Boost the Development of Ultratough Thermoplastic Elastomers with Tunable Hardness
19/01/2025 -
The hardness of a polymer material greatly affects its applicability, but traditionally, increasing hardness tends to reduce toughness. This study introduces a hybrid soft segment strategy that...
Synergistic Adhesion and Shape Deformation in Nanowire‐Structured Liquid Crystal Elastomers
19/01/2025 -
Liquid crystal elastomer films with dense nanowire arrays exhibit synergistic adhesion and shape‐changing properties. They curl toward the nanowire side under heat or chemical vapors but away from...
Oriented Molecular Dipole‐Enabled Modulation of NiOx/Perovskite Interface for Pb‐Sn Mixed Inorganic Perovskite Solar Cells
19/01/2025 -
High‐performance Pb‐Sn‐based inorganic perovskite solar cells are achieved by introducing a 4‐aminobenzenesulfonic acid dipole interlayer at the NiOx/perovskite interface. The oriented dipole...
Unconventional Ferroelectric‐Ferroelastic Switching Mediated by Non‐Polar Phase in Fluorite Oxides
19/01/2025 -
The in situ atomic scale transmission electron microscopy experiment reveals a non‐polar phase‐mediated ferroelectric‐ferroelastic coupled switching pathway in fluorite oxides.HfO2/ZrO2‐based...
Boosting Thermoelectric Performance of Semicrystalline Conducting Polymers by Simply Adding Nucleating Agent
19/01/2025 -
Simply adding a nucleating agent N,N′‐(1,4‐phenyl)diisonicotinamide (PDA) to poly(2,5‐bis(3‐alkylthiophen‐2‐yl)thieno[3,2‐b]thiophene (PBTTT‐C14) precisely tunes its...
Metabolomic Analysis and Computational Biology Reveal the Potential Metabolic Pathways for Improvement of Fucoxanthin and Eicosapentaenoic Acid (EPA) Biosynthesis in Phaeodactylum tricornutum
-
Abstract This work aims to provide a basis for the enhancement of fucoxanthin (FCX) and eicosapentaenoic acid (EPA) biosynthesis in the microalga Phaeodactylum...
Dynamic Culture of Bioprinted Liver Tumor Spheroids in a Pillar/Perfusion Plate for Predictive Screening of Anticancer Drugs
16/01/2025 -
The overall process of dynamic liver cancer spheroid culture in the 144PillarPlate/144PerfusionPlate for high‐throughput screening of anticancer drugs.ABSTRACTRecent advancements in...
Scalable Synaptic Transistor Memory from Solution‐Processed Carbon Nanotubes for High‐Speed Neuromorphic Data Processing
15/01/2025 -
Scalable synaptic transistor memory from solution‐processed carbon nanotubes, exhibiting reconfigurable weights and long‐term synaptic plasticity, enables parallel neuromorphic data processing...
Aerosol CVD Carbon Nanotube Thin Films: From Synthesis to Advanced Applications: A Comprehensive Review
15/01/2025 -
Aerosol chemical vapor deposition (CVD) is a cutting‐edge method for producing carbon nanotube (CNT) thin films through gas‐phase synthesis and filtration collection. The films exhibit...
Scalable Synthesis of 2D ErOCl with Sub‐meV Narrow Emissions at Telecom Band
15/01/2025 -
Centimeter‐size, uniform 2D ErOCl film, and diverse 2D rare‐earth materials are grown using self‐encapsulation strategy. 2D ErOCl possesses high crystalline quality, excellent ambient and...
Prediction of Multi-targeting Pharmacological Activity of Bioactive Compounds from Medicinal Plants Against Hepatocellular Carcinoma Through Advanced Network Pharmacology and Bioinformatics-Based Investigation
-
Abstract The primary objective of this study was to identify bioactive compounds from four medicinal plants with multi-targeting activity against hepatocellular carcinoma (HCC). A...
Nicotine Ameliorates α-Synuclein Preformed Fibril-Induced Behavioral Deficits and Pathological Features in Mice
-
Abstract Epidemiologic study suggests that nicotine reduces the risk of Parkinsonâs disease (PD) and thus could serve as a potential treatment. In this study, we aimed to...
Effect of Chemical Foaming Process Parameters on the Performance of Epoxy Foam and Parameter Optimization Strategies
11/01/2025 -
The impact of core process parameters on the microscopic geometric parameters and uniaxial compression response of epoxy foam during the foaming process is explored through experiments designed using...
Nanoparticle‐Coated X2CrNiMo17‐12‐2 Powder for Additive Manufacturing—Part II: Processability by Powder Bed Fusion of Metals Using a Laser Beam
11/01/2025 -
In this manuscript, the processability of X2CrNiMo17‐12‐2 powder coated with silicon carbide, silicon, and silicon nitride nanoparticles is investigated. The amount of nanoparticles varies from...
Impact of Sputtered AZO Seed Layer Thickness on Hydrothermally Grown ZnO Nanowires Properties for Flexible Perovskite Solar Cells
11/01/2025 -
Herein, ZnO nanowires (NWs) have been grown on various thicknesses of AZO films deposited onto flexible substrates through a simple, low‐temperature hydrothermal growth process. Structural,...
Next‐Generation Embedded Printed Sensors for Near‐Field Monitoring of High‐Performance Composites
10/01/2025 -
Small‐footprint passive planar sensors are fabricated using screen printing and used to monitor ply movement during the manufacturing of carbon fiber‐reinforced polymer (CFRP) materials. Stacked...
Enhanced Fog Water Harvesting on Superhydrophobic Steel Meshes
09/01/2025 -
Fog harvesting using mesh designs offers a sustainable solution to water scarcity. This study highlights key considerations for fog harvesting research and develops a methodology for a standardized...
