Otros
Otros
MOF?Fe@C Nanocomposites for Microwave Absorption
29/05/2024 -
The arrival of the 5G era has brought great benefits to our lives, but it has also brought problems such as electromagnetic radiation. Therefore, the demand for lightweight, high?performance...
Ultrasonic Punching with Inkjet?printed Dot Array for Fabrication of Perforated Metal Pattern as Transparent Heater
29/05/2024 -
This study introduces an aluminum transparent heater manufactured with a perforated pattern by using inkjet printing process. The polymeric sacrificial layer was deposited in a periodic dot...
RuAl thin film deposition by DC magnetron sputtering
29/05/2024 -
The intermetallic transition metal B2 structured aluminide RuAl is a candidate material for use in various applications, including microelectronics and structural materials under demanding...
Investigation of the elevated temperature tribological property and wear mechanism of Fe?15Cu?0.8C materials containing Mo?coated MoS2 powders
28/05/2024 -
In this work, MoS2 solid lubricant was introduced in the form of Mo?coated MoS2 powder, to enhance the antifriction properties of sintered ferrous antifriction materials (FAMs). The microstructure,...
Laser?Scribed Battery Electrodes for Ultrafast Zinc?Ion Energy Storage
29/05/2024 -
Aqueous Zn batteries are promising for large?scale energy storage applications but are plagued by the lack of high?performance cathode materials that enable high specific capacity, ultrafast...
Designing Advanced Amorphous/Nanocrystalline Alloys by Controlling the Energy State
29/05/2024 -
Amorphous alloys, also known as metallic glasses, exhibit many advanced mechanical, physical and chemical properties. Owing to the nonequilibrium nature, their energy states can vary over a wide...
Thiosalicylic?Acid?Mediated Coordination Structure of Nickel Center via Thermodynamic Modulation for Aqueous Ni–Zn Batteries
29/05/2024 -
Uniquely functional nanocomplexes with rich coordination environments are critical in energy storage. However, the construction of structurally versatile nanocomplexes remains challenging. In this...
Modular Engineering of Aptamer?Based Nanobiotechnology for Conditional Control of ATP Sensing
29/05/2024 -
Recent breakthroughs in modular engineering of regulatable sensor technology via a combination of aptamer probe design with nanotechnology have allowed conditional control of ATP sensing with...
Perspective on Tailored Nanostructure?Dominated SPP Effects for SERS
29/05/2024 -
The contributions of tailoring structure?dominated SPPs to SERS effects can be maximized by achieving highly efficient generation, lossless propagation, highly effective focusing, and perfectly...
DNA?Based Nanomaterials for Analysis of Extracellular Vesicles
29/05/2024 -
Sensitive and accurate analysis for extracellular vesicles (EVs) has received substantial attention for noninvasive diagnosis and prognosis of diseases. Owing to the excellent programmability and...
Impact and torsional behavior of additive layer?manufactured biopolymer: An advancement for orthopedic applications
29/05/2024 -
Distal ulna locking bone plates (DLBPs) are commonly employed in the treatment of distal ulna fractures. However, commercially available metallic bone plates experience stress shielding and lack...
Design, synthesis, and antibacterial activity of pleuromutilin derivatives
28/05/2024 -
We reports the design, synthesis, and antibacterial activity study of pleuromutilin derivatives with 2?methyl?4?nitroaniline and 2?methoxy?4?nitroaniline side chains at the C22 position. The...
Graphene Nanoplatelets/Polylactic Acid Conductive Polymer Composites: Tensile, Thermal and Electrical Properties
27/05/2024 -
The addition of GNP filler into an insulative PLA matrix, above the percolation threshold (7 wt %), has successfully developed a continuous conductive network. The electrons can move freely within...
Methanol Synthesis from Sustainable Feedstocks – A Quantitative Side Product Analysis
27/05/2024 -
A correlation between the reactor operating conditions and the formation of carbonaceous side products in methanol synthesis is proposed by quantitative analyses of crude methanol samples from four...
Evaluation of Pyrazolyl?Indolizine Derivatives as Antimicrobial Agents: Synthesis, In vitro, In silico ADMET and Molecular Docking Studies
27/05/2024 -
Herein, we report analogues of s?indacene by the synthesis of novel indolizine derivatives. Using chloroform as an appropriate solvent, sixteen derivatives of pyrazolyl?indolizine (4?19) were...
Design and Synthesis of MarinePolybrominated Diphenyl Ether Derivatives as Potential Anti?inflammatory Agents
29/05/2024 -
Natural polybrominated diphenyl ethers are generally isolated from sponges and possess a broad range of biological activities. Through screening of our marine natural product library, we discovered...
Strategies to Design Chemocatalytic Racemization of Tertiary Alcohols: State of the Art & Utilization for Dynamic Kinetic Resolution
29/05/2024 -
In the challenging field of racemizing tertiary alcohols, recently different concepts were developed. Suitable catalysts for efficient racemization and suppressing unwanted side?reactions were found....
Solidification/stabilization of lead-contaminated soil using alkali-activated volcanic ash
28/05/2024 -
The bioaccumulation of lead in soil poses a significant human health risk. The solidification/stabilization (S/S) technique, employing binders like Portland cement or lime, is a common method for...
Cerium oxide /Co–Co Prussian blue analogue composite catalyst for enhanced peroxymonosulfate activation for effective removal of tetracycline hydrochloride from water
28/05/2024 -
In this paper, a novel CeO2/Co3[Co(CN)6]2 (CeO2/PBACo-Co) composite was prepared with co-precipitation and utilized to activate peroxymonosulfate (PMS) to eliminate tetracycline hydrochloride...
Seasonal toxicity of urban road dust in runoff process-studies in Poland
28/05/2024 -
Urban road dust (URD) is one of the most important non-point sources of pollution in agglomerations. The aim of this study was to assess the seasonal toxic effects of URD runoff in two regions of...
A method to obtain probabilistic fatigue lives under varying strain peaks for rubber components with small samples
27/05/2024 -
Uniaxial tension fatigue experiments are conducted on filled natural rubber (NR) specimens. According to the test data, typical probabilistic distributions under constant strain peak are...
