Materiales avanzados
Materiales avanzados
The Synergistic Effect of Carbon Black/Carbon Nanotube Hybrid Fillers on the Physical and Mechanical Properties of EPDM Composites after Exposure to High-Pressure Hydrogen Gas
11/04/2024 -
This study investigated the synergistic effect of carbon black/multi-wall carbon nanotube (CB/MWCNT) hybrid fillers on the physical and mechanical properties of Ethylene propylene diene rubber (EPDM)...
Effects of fluorene-9-bisphenol exposure on anxiety-like and social behavior in mice and protective potential of exogenous melatonin
04/04/2024 -
Fluorene-9-bisphenol (BHPF) is widely used in the manufacture of plastic products and potentially disrupts several physiological processes, but its biological effects on social behavior remain...
Crystallinity and mechanical properties of polypropylene products foamed by microcellular injection molding process
16/03/2024 -
The crosslinking of the PLA/AES blend with dicumyl peroxide in the molten state formed a tough material, suggesting the formation of PLA?g?AES.AbstractAcrylonitrile?EPDM?styrene (AES) was applied as...
Tuning the mechanical and thermomechanical properties through the combined effect of crosslinking and annealing in poly(lactic acid)/acrylonitrile?EPDM?styrene blends
16/03/2024 -
Overview of the optimization and modeling process.AbstractAligned with the prevailing sustainability paradigm, the imperative adoption of bio?based substitutes for constituents within...
Nylon 66 short fiber reinforcement in EPDM power transmission belting: A path to enhanced mechanical performance
18/03/2024 -
Schematic flowchart for nylon short fiber reinforced V?belt rubber composite.V?belts are commonly used to transmit power between two distant pulleys. Therefore, a strong reinforcement for dimensional...
Acrylate composite polyurethane binder for steel bridge deck pavements: Process optimization by response surface methodology and microanalysis
23/01/2024 -
The effect of graphite content on the wear mechanism of EPDM?PAE.AbstractHansen solubility parameter theory and rheological laws were employed to investigate the microscopic cross?linked network...
From Waste to Value Added Products: Manufacturing High Electromagnetic Interference Shielding Composite from End-of-Life Vehicle (ELV) Waste
29/12/2023 -
The use of plastics in automobiles is increasing dramatically due to their advantages of low weight and cost-effectiveness. Various products can be manufactured by recycling end-of-life vehicle (ELV)...
On the injection molding of thick?walled TPVs: linking static and dynamic mechanical properties with morphology
30/12/2022 -
Elastomers are widely used in the automotive industry in anti?vibration components. Commonly, elastomeric anti?vibration components are made of thermoset rubbers. However, new drivers related to...
A double-decker silsesquioxane of norbornene and performance of crosslinking reactive modified EPDM ablation resistance composites
-
To improve the ablation resistance of ethylene propylene ethylidene norbornene monomer (EPDM) insulation layer, a lightweight novel structure of Double-Decker Silsesquioxane bonded norbornene unit...
Hydrogen gas permeation in peroxide?crosslinked ethylene propylene diene monomer polymer composites with carbon black and silica fillers
02/12/2022 -
This study investigated the effect of two types of fillers, carbon black (CB) and silica, on the H2 permeation of peroxide?crosslinked ethylene propylene diene monomer (EPDM) polymers at different...
Enhancement of mechanical properties of high modulus polypropylene grade for multilayer sewage pipes applications
05/11/2022 -
AbstractThis work is focused on developing a new type of polymer blend to improve the viscoelastic property of methyl methacrylate acrylonitrile butadiene styrene (MABS). A multi?phase binary polymer...
Elucidation of the role of ZnO in sulfur cure in novel EPDM-CTS blends
01/01/2023 -
A new concept is introduced in this study, suggesting the role played by the ZnO crystal in sulfur crosslinking polymers, particularly, rubber blends of EPDM-CTS. The study is conducted in a...
Innovative technique to fabricate nanocomposite bimodal foams containing expandable polymeric miroballoons: piezoelectric characteristics
11/10/2022 -
Abstract One of the remarkable properties of special materials is the piezoelectric phenomenon. The piezoelectric effect is the ability of materials and crystals to convert...
Prediction for snow melting process of conductive ethylene propylene diene monomer composites based on machine learning approaches
21/11/2022 -
Accurate prediction for snow melting process of conductive ethylene propylene diene monomer (EPDM) composites is an important prerequisite for engineering applications. In this paper, the snow...
Review on physical and chemical properties of low and high-temperature polymer electrolyte membrane fuel cell (PEFC) sealants
01/11/2022 -
Sealants (or gaskets) play an exceptional role in the efficient functioning of polymer electrolyte membrane fuel cells (PEFCs). They prevent leakage of reactant gases and coolants from the...
Synthesis of a Zinc Hydroxystannate/Sepiolite Hybrid Additive to Avoid Fire Propagation and Reduce Smoke Emission of EPDM Rubber Nanocomposites
10/09/2022 -
A zinc hydroxystannate/sepiolite (SEPZHS) hybrid additive was successfully prepared following a facile wet chemical route synthesis where zinc hydroxystannate (ZHS) nanoparticles were grown on the...
Electrical Conductivity of Rubber Composites with Varying Crosslink Density under Cyclic Deformation
02/09/2022 -
Studies addressing electroconductive composites based on rubber have attracted great interest for many engineering applications. To contribute to obtaining useful materials with reproducible...
Effect of load on the stick-slip phenomenon and wear behavior of EPDM
01/11/2022 -
Reciprocating friction and wear tests of the EPDM are carried out under various loads, and the composition of groups and compounds of EPDM before and after wear is revealed by FTIR and XRD. Then,...
Functional core/shell PMMA/P(MMA?co?PDSECAE)?SH particles with thiol groups in the shell and their adsorption of heavy metal ions
22/07/2022 -
Mechanism of strengthing char layer.AbstractMany advanced fillers were used in ethylene propylene diene monomer (EPDM) insulation composites to enhance the ablative resistance by strengthening char...
An investigation on mechanical, electrical, and rheological characteristics of ultra?high molecular weight (UHMW)?EPDM/PP blends?based conductive thermoplastic vulcanizates (CTPVs)
16/07/2022 -
UHMW?EPDM based CTPVA new generation conductive thermoplastic vulcanizates (CTPVs) have been developed and characterized in detail, which is based on ultra?high molecular weight (UHMW)?EPDM rubber...
Research and Development of High-Performance High-Damping Rubber Materials for High-Damping Rubber Isolation Bearings: A Review
15/06/2022 -
At present, high-damping rubber materials, widely used in the field of engineering seismic isolation, generally have the problems such as narrow effective damping temperature range, low damping loss...
