Eléctrico
Eléctrico
Feed‐Draw Printing Enables Monolithically Integrated Flexible Sensors With High Interfacial Toughness and Wide Linear Range
07/07/2026 -
A feed‐draw printing strategy enables monolithic microcone capacitive sensors with in situ co‐cured interfaces reaching 1 547 J m−2 toughness and stable operation over 200 000 cycles....
3D Printing of Magnetic Soft Materials for Functional Structures and Devices
07/07/2026 -
Magnetic soft materials (MSMs) are emerging as a versatile platform for functional structures and devices. This Review maps their manufacturing landscape from traditional fabrication to 3D printing,...
Mechanically Robust and Flexible Nitride Ceramic Nanofibers Enabling Advanced Thermal Management
07/07/2026 -
A multiscale structural optimization strategy for nitride ceramic nanofibers is proposed to achieve integrated mechanical and thermal performance. Benefiting from the defect‐minimized fibrous...
Inorganic Ionic Polymerization‐Anchored Polymer Networks for Ultrastrong and Ultratough Eutectogels
07/07/2026 -
By incorporating CPO as reactive nanoanchors into a PVA network, a PVA/CPO eutectogel is constructed using an inorganic ionic polymerization‐anchored polymer network strategy. The resulting riveted...
Entropy‐Driven Conformational Disorder Enables Outstanding High‐Temperature Energy Storage in Dielectric Polymers
06/07/2026 -
An “entropy‐driven conformational disorder” strategy is proposed to engineer a stochastically entangled amorphous topology in polymer dielectrics. By maximizing conformational entropy, this...
Potential Role of METTL14 in Modulating Prostate Cancer Proliferation and Glycolysis Through m6A Modification of LINC01138
-
This study aimed to investigate the role of methyltransferase-like 14 (METTL14) in regulating proliferation and glycolysis in prostate cancer (PCa) through m6A modification of LINC01138. The...
Structural Engineering of Rare‐Earth Nanomaterials
06/07/2026 -
This Review presents structural engineering as an independent design strategy for rare‐earth nanomaterials. It summarizes how lattice symmetry, phase selection, local perturbation, hetero‐phase...
Breaking Thermal Conductivity–Electrical Resistivity Trade‐Off in Liquid Metal–Based Thermal Interface Materials via Interface Engineering
06/07/2026 -
An interfacially stabilized, electrically insulated bimodal architecture is established in a liquid‐state gallium–indium composite through ultrathin polysiloxane regulation. The design...
Screen‐Printed Few‐Layer Graphene Platforms for Monitoring Switchable Spin‐Crossover Phenomena at Room‐Temperature
06/07/2026 -
A printed graphene‐based device integrating a spin‐crossover material enables reversible and hysteretic electrical and optical switching near room temperature. The strong correlation between...
Dual‐Functional Alumina Additive Enabling Efficient, Volumetric Mechanoluminescence for Nighttime Safety Footwear
04/07/2026 -
A volumetric mechanoluminescent (ML) foam is realized by incorporating Al2O3 as a dual‐functional additive into conventional ML platforms. Al2O3 induces spontaneous pore formation during thermal...
Design and Manufacturing Principles of Smart Fibers
04/07/2026 -
Smart fibers integrate environmental sensing with programmable responses, yet their performance is ultimately governed by how they are made. This review reframes manufacturing as a central design...
Surface SOx Species Stabilized Metal–Oxygen Bonds in PtNi Nanoalloy for Highly Efficient and Durable Seawater Hydrogen Production
04/07/2026 -
Surface SOx species stabilize PtNi nanoalloys through enhanced M–O bonds, which significantly enhance water disociation kinetics and chloride ions resistance of the catalyst. As a result, the...
Light‐Written Nonvolatile Polarization via Defect‐Engineered Charge Trapping
03/07/2026 -
A soft Polydimethylsiloxane/FeTiO3 (PDMS/FTO) composite enables light‐written and long‐retention interfacial polarization without high‐voltage poling. Oxygen‐vacancy traps, tuned by spark...
From Behavior to Dynamics: Decoding Carrier Roles in Cu‐based Photocathodes for Solar‐Driven CO2 Reduction
02/07/2026 -
The performance of Cu‐based photocathodes in photoelectrochemical CO2 reduction is not governed by catalytic sites alone, but by the dynamic journey of photogenerated carriers. This review decodes...
High‐Performance Weavable Piezoelectret Fibers via Scalable In Situ Poling Melt‐Spinning for Real‐Time Knee Joint Rehabilitation Monitoring
02/07/2026 -
An in situ polarization strategy has been proposed, which integrates pore formation and in situ poling in melt spinning. The optimized fibers exhibit a high piezoelectric coefficient of 1.8 pC/N and...
Self‐Powered Flexible Triboelectric‐Gated Ion‐Gel Transistor for Neuromorphic Tactile Sensing and Human Activity Recognition (Adv. Mater. 37/2026)
02/07/2026 -
Self‐Powered Flexible Triboelectric‐Gated Ion‐Gel TransistorThis cover depicts a battery‐free flexible neuromorphic system where biomechanical motion is directly translated into synaptic...
A label-free membrane-based biosensor array with AuNP-modified PDMS for sensitive and specific detection of alpha-fetoprotein
-
The surface stress–based transduction enabled by antibody functionalization has emerged as a promising paradigm for label-free biosensor development. However, the inherent limitations of...
Revisiting the Carbon Footprint of Single‐Use Technologies in Biomanufacturing: A Bottom‐Up Analysis Reveals a Paradigm Shift
05/07/2026 -
ABSTRACTThe biopharmaceutical industry increasingly relies on single‐use technologies (SUT) for operational flexibility. For a long time, SUT was considered more sustainable than stainless‐steel...
Hybrid Metal–Carbon Ink for Printed Stretchable Temperature Sensors
30/06/2026 -
We prepare conductive inks for temperature sensing with silver flakes and carbon or graphite flakes in a silicone elastomer matrix. Silver dominates the temperature‐dependent conductivity, while...
