Eléctrico
Eléctrico
Development of Triboelectric Nanogenerators using Novel 3D Printed Polymer Materials
06/12/2023 -
Triboelectric nanogenerators (TENGs) are becoming attractive devices for harvesting mechanical energy. 3D printing (3DP) is a newly reported technique for the development of this device. This...
Enhancing thermal conductivity, electrical insulation, and mechanical strength of polydimethylsiloxane composites with sandwich structure
06/12/2023 -
In this paper, boron nitride(BN)/carbon nanotube(CNT)/boron nitride(BN) (BCB) film of sandwich structure is prepared by vacuum?assisted filtration (VAF). Compared to the thermal conductivity (?) of...
Interfacial Characteristics and Mechanical Properties of 316L and S214 Bimetals Fabricated by Wire?Arc Additive Manufacturing
05/12/2023 -
Both 316L and S214 are free of cracking and pitting and have honeycomb joints. At greater heat input, the S214 layer in S214/316L shifts from ??Cu?+???+?Fe?rich phase to ??Cu?+?Fe?rich phase?+?K...
Synthesis of Phenothiazine Embedded Heteroporphyrins
06/12/2023 -
A series of phenothiazine embedded heteroporphyrins containing one phenothiazine unit, two pyrrole rings and one heterocycle such as furan, thiophene, selenophene and tellurophene connected via four...
Stability enhancement and patterning of silver nanowire networks by conformal TiO2 coating for flexible transparent conductive electrodes
05/12/2023 -
Abstract Highly stable and patterned silver nanowire (AgNW) networks are essential and challenging for flexible or wearable electronics. In this work, TiO2 coatings by atomic...
A 4E Comparative Study between BIPV and BIPVT Systems in Order to Achieve Zero-Energy Building in Cold Climate
05/12/2023 -
The growing demand for energy has led to the popularity of building integrated photovoltaic (BIPV) systems. However, photovoltaic (PV) system efficiency decreases as the temperature increases. To...
Experimental and Modelling of Lightning Damage to Carbon Fibre-Reinforced Composites under Swept Stroke
05/12/2023 -
Lightning swept stroke creates multiple lightning attachments along an aircraft in flight. This introduces distinct structural damage compared to that from a single-point lightning current injection...
Tailored Nanoscale Architectures for White Light Photoelectrochemistry: Zinc Oxide Nanorod-Based Copper Oxide Heterostructures
06/12/2023 -
This study investigates the morphological evolution, optical properties, and photoelectrochemical (PEC) performance of copper-oxide-coated ZnO nanorods under different annealing conditions. Distinct...
A Review of the Metal Additive Manufacturing Processes
05/12/2023 -
Metal additive manufacturing (AM) is a layer-by-layer process that makes the direct manufacturing of various industrial parts possible. This method facilitates the design and fabrication of complex...
Laser-Induced Backward Transfer of Light Reflecting Zinc Patterns on Glass for High Performance Photovoltaic Modules
06/12/2023 -
Commercially available photovoltaic (PV) modules typically consist of individual silicon half-cut cells that are electrically interconnected. This interconnection method results in gaps between the...
In Situ Sintering of CdSe/CdS Nanocrystals under Electron Beam Irradiation
05/12/2023 -
Colloidal semiconductor nanocrystals have attracted widespread attention due to their tremendous electrical and optical properties. Nanoparticles exhibit a strong tendency to aggregate and sinter in...
Growth and Characterization of Carbon Nanofibers Grown on Vertically Aligned InAs Nanowires via Chemical Vapour Deposition
05/12/2023 -
The integration of carbon nanostructures with semiconductor nanowires holds significant potential for energy-efficient integrated circuits. However, achieving precise control over the positioning and...
Mechanistic Insights into Electronic Current Flow through Quinone Devices
05/12/2023 -
Molecular switches based on functionalized graphene nanoribbons (GNRs) are of great interest in the development of nanoelectronics. In experiment, it was found that a significant difference in the...
Acid-Modulated Peptide Synthesis for Application on Oxide Biosensor Interfaces
06/12/2023 -
In this paper we report an acid-modulated strategy for novel peptide microarray production on biosensor interfaces. We initially selected a controlled pore glass (CPG) as a support for solid-phase...
The Role of MWCNTs in Enhancing the Foam Stability and Rheological Behavior of Cement Pastes That Contain Air-Entraining and Superplasticizer Admixtures
07/12/2023 -
This research delves into the intricate dynamics between multi-walled carbon nanotubes (MWCNTs), air-entraining admixtures (AEAs), and a range of superplasticizers (SPs) in cementitious systems,...
Universal Approach to Integrating Reduced Graphene Oxide into Polymer Electronics
05/12/2023 -
Flexible electronics have sparked significant interest in the development of electrically conductive polymer-based composite materials. While efforts are being made to fabricate these composites...
Moving Crystal Phases of a Quantum Wigner Solid in an Ultra-High-Quality 2D Electron System
-
Researchers have precisely measured the electrical-transport properties of a highly ordered Wigner solid—a crystalline state formed of electrons rather than atoms.
Correction: Capturing the attentional response to clinical auditory alarms: An ERP study on priority pulses
07/12/2023 -
The last author, Alberto Crego, is incorrectly noted as the corresponding author. The correct corresponding author is...
Analytical model for the electrical conductivity of the hybrid nanocomposite comprising conducting nanowires and insulating particulate fillers
06/12/2023 -
This study introduces an analytical model for predicting the electrical conductivity of hybrid nanocomposites made of conducting nanowires and insulating particles. Leveraging machine learning...
Conductive and auxetic composite membranes based on graphene nanoplatelets and polybutylene succinate produced via electrospinning
06/12/2023 -
PBS and GNP were mix in solution to produce electrically conductive nanofibers via electrospinning after optimization of the processing conditions.This work presents a method to produce conductive...
Mechanistic investigations of the disproportionation reaction catalyzed by AlCl3/NH2-MIL-53(Al) to produce dimethyldichlorosilane
06/12/2023 -
Dimethyldichlorosilane is the most important monomer in the synthesis of widely used organosilicon materials. A vast number of silicone by-products are produced during the industrial synthesis of...