Extrusión

Extrusión

A Modified Constitutive Model and Microstructure Characterization for 2195 Al-Li Alloy Hot Extrusion
18/05/2023 - The quality of extruded profiles depends largely on accurate constitutive models and thermal processing maps. In this study, a modified Arrhenius constitutive model for homogenized 2195 Al-Li alloy...
Kidney Bean Substitution Ameliorates the Nutritional Quality of Extruded Purple Sweet Potatoes: Evaluation of Chemical Composition, Glycemic Index, and Antioxidant Capacity
04/04/2023 - The extrusion process may influence the nutritional profiles of carbohydrate-rich food ingredients, including the glycemic index (GI) and antioxidant capacity. This study aimed to evaluate the...
Modification of the Tensile Performance of an Extruded ZK60 Magnesium Alloy with the Addition of Rare Earth Elements
02/04/2023 - The influence of rare earth (RE) elements on the microstructure and mechanical performance of an extruded ZK60 Mg alloy was studied. Two types of RE elements were added to a ZK60 material and then...
New 2.5?D twin screw extruder model for the feed section of a co?rotating twin screw extruder with comparisons to data
27/03/2023 - Twin screw extruder unit operation.Many polymers are processed and compounded in co?rotating, fully intermeshing twin screw (TS) extruders. The typical compounding process consists of multiple unit...
Development and Characterization of Drug Loaded PVA/PCL Fibres for Wound Dressing Applications
08/03/2023 - Nowadays, synthetic polymers are used in medical applications due to their special biodegradable, biocompatible, hydrophilic, and non-toxic properties. The materials, which can be used for wound...
Enhancing the Techno-Functionality of Pea Flour by Air Injection-Assisted Extrusion at Different Temperatures and Flour Particle Sizes
19/02/2023 - Industrial applications of pulses in various food products depend on pulse flour techno-functionality. To manipulate the techno-functional properties of yellow pea flour, the effects of flour...
Scalable Continuous Manufacturing Process of Stereocomplex PLA by Twin-Screw Extrusion
12/02/2023 - A scalable continuous manufacturing method to produce stereocomplex PLA was developed and optimized by melt-blending a 1:1 blend of high molecular weight poly(L-lactide) (PLLA) and high molecular...
Thermal, Tensile and Fatigue Behaviors of the PA6, Short Carbon Fiber-Reinforced PA6, and Continuous Glass Fiber-Reinforced PA6 Materials in Fused Filament Fabrication (FFF)
18/01/2023 - Utilization of additive manufacturing (AM) is widespread in many industries due to its unique capabilities. These material extrusion methods have been developed extensively for manufacturing polymer...
Indirect Induction Sintering of Metal Parts Produced through Material Extrusion Additive Manufacturing
16/01/2023 - Avoiding loose powders and resins, material extrusion additive manufacturing is a powerful technique to produce near-net shape parts, being a cheap and safe alternative for developing complex...
Upscaling of a Mechanochemical Devulcanization Process for EPDM Rubber Waste from a Batch to a Continuous System
06/01/2023 - The present work is a comparative study of the effects of mechanical shear, temperature, and concentration of a chemical agent on the devulcanization process of post-industrial ethylene propylene...
Modeling of extrusion-based additive manufacturing for pelletized thermoplastics: Analytical relationships between process parameters and extrusion outcomes
- Recent developments in additive manufacturing are moving toward a new trend in material extrusion (ISO/ASTM 52910:2018), namely, the possibility of printing thermoplastic strands directly from...
Exploring the potential of FSW-ed Al–Zn–Mg–Cu-based composite reinforced by trace in-situ nanoparticles in manufacturing workpiece with customizable size and high mechanical performances
01/02/2023 - Al–Zn–Mg–Cu alloys that are prone to segregation and hot cracks always encounter difficulty in manufacturing large-size workpiece with desirable strength-plasticity synergy, especially when...
Rheological Characterization and Printability of Polylactide (PLA)-Alumina (Al2O3) Filaments for Fused Deposition Modeling (FDM)
25/11/2022 - This article presents the study of the rheological properties and the printability of produced ceramic-polymer filaments using fused deposition method (FDM) 3D printing technology. Powder mixtures...
Recycling of EPDM via Continuous Thermo-Mechanical Devulcanization with Co-Rotating Twin-Screw Extruder
11/11/2022 - Devulcanization represents the recycling of choice for a homogenous rubber waste stream because it allows revulcanization of samples previously devulcanized, making the life of the rubber virtually...
Butterfly Pea Flower as a Novel Ingredient to Produce Antioxidant-Enriched Yellow Pea-Based Breakfast Cereals
30/10/2022 - Butterfly pea flower (BP) is a rich source of bioactive components and can potentially be utilized to produce appealing, wholesome foods. Antioxidant and dietary fiber-enriched breakfast cereals were...
Quinoa Snack Production at an Industrial Level: Effect of Extrusion and Baking on Digestibility, Bioactive, Rheological, and Physical Properties
27/10/2022 - This research aimed to produce gluten-free snacks on a pilot scale from quinoa flour. These snacks experienced an extrusion process, followed by baking. The effects of these technological processes...
Andean Sprouted Pseudocereals to Produce Healthier Extrudates: Impact in Nutritional and Physicochemical Properties
18/10/2022 - The tailored formulation of raw materials and the combination of grain germination and extrusion processes could be a promising strategy to achieve the desired goal of developing healthier expanded...
Recycled Multi-Material Packaging Reinforced with Flax Fibres: Thermal and Mechanical Behaviour
19/10/2022 - In this work, the use of a recycled mix stemming from the treatment of multilayer aseptic packaging used in the food and beverage industry is proposed as the matrix for short fibre composites...
Comparison of Phytochemical Profile and In Vitro Bioactivity of Beverages Based on the Unprocessed and Extruded Sesame (Sesamum indicum L.) Seed Byproduct
12/10/2022 - In this research functional beverages based on the unprocessed and extruded sesame seeds byproduct were fabricated; phytochemical profile, antioxidant, antidiabetic, and hypoglycemic potential were...
Effect of varying cell densities on the rheological properties of the bioink
01/12/2022 - The rheological characterization of any biopolymer solution is crucial for evaluating the overall printability or injectability of the hydrogel. However, the effect of cells in the cell-laden...
Additive Manufacturing for Sensors: Piezoresistive Strain Gauge with Temperature Compensation
28/08/2022 - Additive manufacturing technologies allow the fabrication of smart objects, which are made up of a dielectric part and an embedded sensor able to give real-time feedback to the final user. This...