Nanomateriales
Nanomateriales
Aerosol?Synthesized Surfactant?Free Single?Walled Carbon Nanotube?Based NO2 Sensors: Unprecedentedly High Sensitivity and Fast Recovery
16/04/2024 -
NO2 chemical sensors using aerosol?synthesized single?walled carbon nanotubes demonstrate unprecedently high sensitivity, ultrafast response/recovery, and low limit of detection. This is owing to the...
Hollow Spongy Phase Change Composite Fiber with Heat Storage Behavior via Photo-Thermal Transition
16/04/2024 -
A phase change fiber was prepared by loading poly(ethylene glycol) (PEG) in the hollow fiber (HFF). HFF showed a high loading capability (50–65%) of PEG. The enthalpy value of the phase change...
Enhancing the UV resistance and flame retardancy of epoxy resin composites with fluorescent carbon dots
15/04/2024 -
The flexible piezoresistive tactile sensor (FPTS) preparation process. (a) Preparation of multiwalled carbon nanotubes (MWCNTs) solution. (b) Preparation of polydimethylsiloxane (PDMS) solution. (c)...
Isocyanate?chitin modified microspheres for chiral drug separation in high performance liquid chromatography
16/04/2024 -
Preparation process diagram of MWCNTs/PANI@MWCNTs/PAN fiber.AbstractWearable smart sensors have broad prospects in medical health and physical exercise. In this study, the core–shell conductive...
Surface-defect tailoring in SnO2 (CNT) nanomaterials via sol-gel routes and its influence on the cycling stability
15/04/2024 -
Abstract We report on the synthesis of SnO2 nanoparticles and SnO2:CNT hybrids, via a one-step solgel method. Herein, we investigate the influence of the synthesis conditions on...
A carbon nanotube/graphene nanoplatelet pressure sensor prepared by combining 3D printing and freeze-drying method
16/04/2024 -
Abstract With the development of wearable electronic devices, flexible sensors have received widespread attention, especially for high sensitivity sensors. However, sensors...
Improving the Adhesion of Multi-Walled Carbon Nanotubes to Titanium by Irradiating the Interface with He+ Ions: Atomic Force Microscopy and X-ray Photoelectron Spectroscopy Study
17/04/2024 -
A complex study of the adhesion of multi-walled carbon nanotubes to a titanium surface, depending on the modes of irradiation with He+ ions of the “MWCNT/Ti” system, was...
Electrochemical Detection of Cd2+, Pb2+, Cu2+ and Hg2+ with Sensors Based on Carbonaceous Nanomaterials and Fe3O4 Nanoparticles
18/04/2024 -
Two electrochemical sensors were developed in this study, with their preparations using two nanomaterials with remarkable properties, namely, carbon nanofibers (CNF) modified with Fe3O4 nanoparticles...
Influence of Manufacturing Process on the Conductivity of Material Extrusion Components: A Comparison between Filament- and Granule-Based Processes
18/04/2024 -
The additive manufacturing of components using material extrusion (MEX) enables the integration of several materials into one component, including functional structures such as electrically...
Giant nanomechanical energy storage capacity in twisted single-walled carbon nanotube ropes
16/04/2024 -
>https://www.nature.com/articles/s41565-024-01645-x Nature Nanotechnology, Published online: 16 April 2024;
Polypropylene aerogel?based composites with paraffin and MWCNTs as phase change materials
18/04/2024 -
PP Aerogel?based composites as phase change materials.The development of energy storage materials is crucial for effective energy management. In this study, we present the creation of a composite...
Simultaneous removal of phenanthrene and Pb using novel PPG-CNTs-nZVI beads
13/04/2024 -
PPG-CNTs-nZVI bead was synthesized by polyvinyl alcohol, pumice, carbon nanotube, and guar gum-nanoscale zero-valent iron to be applied on simultaneously removal of polycyclic aromatic...
Influence of Grid Aperture Ratio on Electron Transmittance and Electron Beam Spot Size in Field Emission Processes of Carbon Nanotubes
15/04/2024 -
Field emission is an important work mode for electron sources, and carbon nanotubes (CNTs) have been extensively studied for their good emission properties. It is well known that the parameters of...
Metal–Organic Frameworks-Derived FeCo/C–CNT Nanocomposites Modified Epoxy Resin for Electromagnetic Protection Coatings for Buildings
15/04/2024 -
Exploring an efficient electromagnetic protection strategy for buildings is of great significance to solve the problems caused by increasing electromagnetic pollution, as the rapid progress of...
Discrete Multiwalled Carbon Nanotubes for Versatile Intracellular Transport of Functional Biomolecular Complexes
-
In recent years, carbon nanotubes have emerged as a potentially revolutionary material with numerous uses in biomedical applications. Compared to other nanoparticles, discrete multiwalled carbon...
Influence of Interface Modification on the Moisture Absorption and Thermal Resistance of Ramie Fiber/Degradable Epoxy Composites
12/04/2024 -
Natural fiber/degradable epoxy composites have received much attention for their advantages of low carbon emissions, low environmental pollution, and utilization of renewable resources. However, the...
Recent Advances in Nanotechnology for the Treatment of Dry Eye Disease
12/04/2024 -
Dry eye disease (DED) incidence is continuously growing, positioning it to become an emergent health issue over the next few years. Several topical treatments are commonly used to treat DED; however,...
Advances in Nanocarrier Systems for Overcoming Formulation Challenges of Curcumin: Current Insights
12/04/2024 -
Curcumin, an organic phenolic molecule that is extracted from the rhizomes of Curcuma longa Linn, has undergone extensive evaluation for its diverse biological activities in both animals and humans....
Approaching Technological Limit for Wet?Pulling Technique
10/04/2024 -
Carbon nanotube fibers (CNTFs) are novel materials with diverse applications. The recently developed wet?pulling technique for CNTF manufacturing is adaptable for laboratory and industrial scales....
Enhanced degradation and removal of ciprofloxacin and ofloxacin through advanced oxidation and adsorption processes using environmentally friendly modified carbon nanotubes
10/04/2024 -
This study explores the utilization of adsorption and advanced oxidation processes for the degradation of ofloxacin (OFL) and ciprofloxacin (CIP) using a green functionalized carbon nanotube...
Polylactic acid/epoxidized linseed oil/polypropylene grafted maleic anhydride: A promising combination of toughness and rigidity
09/04/2024 -
Hybrid polymeric materials with outstanding microwave absorbing properties were prepared by in situ polymerization of aniline in the presence of EVA/CNT/GNP suspension.AbstractMicrowave?absorbing...
